IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60320-1:2015
|
Appliance couplers for household and similar general purposes - Part 1: General requirements |
IEC 60255-21-2:1988
|
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests |
IEC 60038:2009
|
IEC standard voltages |
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources |
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
IEC 60695-2-1:1991
|
Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance |
IEC 60417-1:2002
|
Graphical symbols for use on equipment - Part 1: Overview and application |
IEC 60297-1:1986
|
Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1: Panels and racks |
IEC 60950:1999
|
Safety of information technology equipment |
IEC 60255-21-3:1993
|
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests |
IEC 61293:1994
|
Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 60695-2-3:1984
|
Fire hazard testing. Part 2: Test methods. Bad-connection test with heaters |
IEC GUIDE 106:1996
|
Guide for specifying environmental conditions for equipmentperformance rating |
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV
|
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules |
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements |
IEC 61810-1:2015
|
Electromechanical elementary relays - Part 1: General and safety requirements |
IEC 62103:2003
|
Electronic equipment for use in power installations |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV
|
Low-voltage fuses - Part 1: General requirements |
IEC 60068-2-31:2008
|
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
IEC 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
IEC 61180-2:1994
|
High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
IEC 60068-2-3:1969
|
Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
IEC 60707:1999
|
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods |
IEC 60146-1-1:2009
|
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
ISO 780:2015
|
Packaging Distribution packaging Graphical symbols for handling and storage of packages |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
IEC 60755:2017
|
General safety requirements for residual current operated protective devices |
IEC 60417-2:1998
|
Graphical symbols for use on equipment - Part 2: Symbol originals |
IEC 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation |
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
IEC 60255-5:2000
|
Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests |
IEC 60364-6-61:2001
|
Electrical installations of buildings - Part 6-61: Verification - Initial verification |
ISO 4046:1978
|
Paper, board, pulp and related terms — Vocabulary |
IEC 60255-21-1:1988
|
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal) |
IEC 60071-2:1996
|
Insulation co-ordination - Part 2: Application guide |
ISO 261:1998
|
ISO general purpose metric screw threads General plan |
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV
|
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations |
IEC 60352-2:2006+AMD1:2013 CSV
|
Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
IEC 60068-2-28:1990
|
Environmental testing - Part 2: Tests. Guidance for damp heat tests |
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules |
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
ISO 3864:1984
|
Safety colours and safety signs |
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current |
IEC 60654-3:1983
|
Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences |
IEC 60721-3-1:1997
|
Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage |