ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
BS 7448-1:1991
|
Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials |
ISO 898-2:2012
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
ISO 4287:1997
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO/TR 9769:1991
|
Steel and iron Review of available methods of analysis |
ISO 13628-2:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
NAS1638:2011
|
CLEANLINESS REQUIREMENTS OF PARTS USED IN HYDRAULIC SYSTEMS |
ISO 4885:2017
|
Ferrous materials Heat treatments Vocabulary |
ISO 783:1999
|
Metallic materials Tensile testing at elevated temperature |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
ISO/IEC Guide 25:1990
|
General requirements for the competence of calibration and testing laboratories |
ISO 15579:2000
|
Metallic materials Tensile testing at low temperature |
NACE MR 01 75 : 2003
|
METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
BS 7201-1:1989
|
Hydraulic fluid power. Gas loaded accumulators Specification for seamless steel accumulator bodies above 0.5 L water capacity |
MSS SP 25 : 2013
|
STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
ISO 148:1983
|
Steel — Charpy impact test (V-notch) |
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
ISO 10474:2013
|
Steel and steel products — Inspection documents |
ASTM E 1112 : 2000
|
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature |
ISO 13628-6:2006
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
ISO 13628-4:2010
|
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
ISO 10423:2009
|
Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
BS 7448-2:1997
|
Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials |
ISO 10432:2004
|
Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
ISO 9327-1:1999
|
Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements |
ISO 13628-5:2009
|
Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
ISO 10945:1994
|
Hydraulic fluid power Gas-loaded accumulators Dimensions of gas ports |
EN 1418:1997
|
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 9000-1:1994
|
Quality management and quality assurance standards — Part 1: Guidelines for selection and use |
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |