EN 12015:2014
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
EN 12016:2013
|
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
EN 418 : 1992
|
SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
ISO/TS 14798:2006
|
Lifts (elevators), escalators and moving walks Risk assessment and reduction methodology |
BGR 181 : 2003
|
FUSSBOEDEN IN ARBEITSRAEUMEN UND ARBEITSBEREICHEN MIT RUTSCHGEFAHR |
HD 215 : 200S1
|
SAFETY REQUIREMENTS FOR INDICATING AND RECORDING ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES |
HD 214 : 200S2
|
RECOMMENDED METHOD FOR DETERMINING THE COMPARATIVE TRACKING INDEX OF SOLID INSULATING MATERIALS UNDER MOIST CONDITIONS |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
HD 384.4.41 S2:1996/A1:2002
|
ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 4: PROTECTION FOR SAFETY - CHAPTER 41: PROTECTION AGAINST ELECTRIC SHOCK |
IEC 60947-4-1:2009+AMD1:2012 CSV
|
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
IEC 60249-3-3:1991
|
Base materials for printed circuits - Part 3: Special materials used in connection with printed circuits - Specification No. 3: Permanent polymer coating materials (solder resist) for use in the fabrication of printed boards |
EN 61558-1:2005/A1:2009
|
SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 60249-3-1:1981
|
Base materials for printed circuits. Part 3: Special materials used in connection with printed circuits. Specification No. 1: Prepreg for use as bonding sheet material in the fabrication of multilayer printed boards |
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
IEC 60947-5-1 : 4.0
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
DIN 51131:2014-02
|
Testing of floor coverings - Determination of the anti-slip property - Method for measurement of the sliding friction coefficient |
HD 213 : 200S1
|
|
EN 10025:1990/A1:1993
|
HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS |
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV
|
Low-voltage fuses - Part 1: General requirements |
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
IEC 62326-1:2002
|
Printed boards - Part 1: Generic specification |
EN 45011 : 1998
|
GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
DIN 51130:2014-02
|
Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
EN 60747-5-5:2011/A1:2015
|
SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013) |
EN 60068-2-27:2009
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
HD 224 : 200S1
|
REPLACED |
EN 60947-4-1 : 2010 AMD 1 2012
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60439-1:1999+AMD1:2004 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
ISO 13849-2:2012
|
Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
EN 60439-1:1999/A1:2004
|
LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
HD 384.5.54 : 200S1
|
ELECTRICAL INSTALLATION OF BUILDINGS - SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
HD 516 S2:1997/A2:2008
|
GUIDE TO USE OF LOW VOLTAGE HARMONIZED CABLES |
ISO 3864-1:2011
|
Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings |
EN ISO 13849-2:2012
|
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
EN 954-1 : 1996
|
SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO/IEC Guide 65:1996
|
General requirements for bodies operating product certification systems |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
1998/37/EC : 1998
|
DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 62326-1:2002
|
Printed boards - Part 1: Generic specification |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
ISO 18738-2:2012
|
Measurement of ride quality Part 2: Escalators and moving walks |
EN 13015:2001+A1:2008
|
Maintenance for lifts and escalators - Rules for maintenance instructions |
EN 60269-1:2007/A2:2014
|
LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |