|
IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
|
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements |
|
IEC 60127:1974
|
Cartridge fuse-links for miniature fuses |
|
IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV
|
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
|
ISO 4126-1:2013
|
Safety devices for protection against excessive pressure — Part 1: Safety valves |
|
IEC 60950:1999
|
Safety of information technology equipment |
|
IEC 60073:2002
|
Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
|
ISO 9614-1:1993
|
Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
|
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
|
IEC 60364-4-442:1993+AMD1:1995+AMD2:1999 CSV
|
Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 442: Protection of low-voltage installations against temporary overvoltages and faults between high-voltage systems and earth |
|
IEC 62053-11:2003+AMD1:2016 CSV
|
Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1and 2) |
|
IEC 60332-1:1993
|
Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
|
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements |
|
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
|
EN 563:1994/A1:1999/AC:2000
|
SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
|
IEC 61180-2:1994
|
High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
|
ISO 361:1975
|
Basic ionizing radiation symbol |
|
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
|
IEC 60447:2004
|
Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
|
IEC 60405:2003
|
Nuclear instrumentation - Constructional requirements and classification of radiometric gauges |
|
SEMI S10 : 2015E
|
SAFETY GUIDELINE FOR RISK ASSESSMENT AND RISK EVALUATION PROCESS |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
|
IEC 60439-1:1999+AMD1:2004 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
|
IEC 62262:2002
|
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
|
IEC 60364-4-443:1995+AMD1:1998 CSV
|
Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages - Section 443: Protection against overvoltages of atmospheric origin or due to switching |
|
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
|
IEC 60050-826:2004
|
International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
|
IEC 60068-2-75:2014
|
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
|
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
|
IEC 61010-031:2015 RLV
|
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test |
|
IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV
|
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
|
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
|
ISO 14971:2007
|
Medical devices Application of risk management to medical devices |
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols |
|
IEC 61032:1997
|
Protection of persons and equipment by enclosures - Probes for verification |
|
IEC 60332-2:1989
|
Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable |
|
IEC 60445:2017
|
Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
|
IEC 60651:1979+AMD1:1993+AMD2:2000 CSV
|
Sound level meters |
|
IEC 61051-1:2007
|
Varistors for use in electronic equipment - Part 1: Generic specification |
|
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current |
|
IEC 60617-2:1996
|
Graphical symbols for diagrams - Partie 2: Symbol elements, qualifying symbols and other symbols having general application |
|
IEC 60804:2000
|
Integrating-averaging sound level meters |
|
IEC 60799:1998
|
Electrical accessories - Cord sets and interconnection cord sets |