|
IEC 61000-4-8 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-8: TESTING AND MEASUREMENT TECHNIQUES - POWER FREQUENCY MAGNETIC FIELD IMMUNITY TEST |
|
IEC 60038:2009
|
IEC standard voltages |
|
IEC 60951-2:2009
|
Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air |
|
IEC 60050-394:2007
|
International Electrotechnical Vocabulary (IEV) - Part 394: Nuclear instrumentation - Instruments, systems, equipment and detectors |
|
IEC 61000-6-4:2006+AMD1:2010 CSV
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
|
IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST |
|
IEC 61226:2009
|
Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
|
IEC 60532:2010
|
Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV |
|
IEC 62138:2004
|
Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions |
|
IEC 61000-4-11:2004+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
|
IEC 60761-2:2002
|
Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 2: Specific requirements for radioactive aerosol monitors including transuranic aerosols |
|
IEC 60761-3:2002
|
Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 3: Specific requirements for radioactive noble gas monitors |
|
IEC 60761-4:2002
|
Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 4: Specific requirements for radioactive iodine monitors |
|
IEC 60980:1989
|
Recommended practices for seismic qualification of electrical equipment of the safety system for nuclear generating stations |
|
IEC 61000-4-12 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-12: TESTING AND MEASUREMENT TECHNIQUES - RING WAVE IMMUNITY TEST |
|
IEC 60987:2007+AMD1:2013 CSV
|
Nuclear power plants - Instrumentation and control important to safety - Hardware design requirements for computer-based systems |
|
IEC 60544-4:2003
|
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments |
|
IEC 61504:2017
|
Nuclear facilities - Instrumentation and control systems important to safety - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity |
|
IEC 61000-4-6 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS |
|
IEC 60951-3:2009
|
Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 3: Equipment for continuous high range area gamma monitoring |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
IEC 60861:2006
|
Equipment for monitoring of radionuclides in liquid effluents and surface waters |
|
ISO 2889:2010
|
Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities |
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat |
|
IEC 61000-4-2:2008
|
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
|
IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
|
IEC 62262:2002
|
Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
|
IEC 60951-4:2009
|
Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 4: Equipment for continuous in-line or on-line monitoring of radioactivity in process streams |
|
IEC 60880:2006
|
Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
|
IEC 60780:1998
|
Nuclear power plants - Electrical equipment of the safety system - Qualification |
|
IEC 60761-1:2002
|
Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 1: General requirements |
|
IEC 60768:2009
|
Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions |
|
IEC 60068-2-1:2007
|
Environmental testing - Part 2-1: Tests - Test A: Cold |
|
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
|
IEC 60050-393:2003
|
International Electrotechnical Vocabulary (IEV) - Part 393: Nuclear instrumentation - Physical phenomena and basic concepts |
|
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |