ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 2977:1997
|
Petroleum products and hydrocarbon solvents Determination of aniline point and mixed aniline point |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
ISO 15136-2:2006
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness |
ISO/TS 29001:2010
|
Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
ASTM E 309 : 2016 : REDLINE
|
Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation |
ASTM D 429 : 2014 : REDLINE
|
Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
ISO 4666-2:2008
|
Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 2: Rotary flexometer |
ISO 4662:2017
|
Rubber, vulcanized or thermoplastic Determination of rebound resilience |
ISO 815-1:2014
|
Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
ASTM D 1414 : 2015 : REDLINE
|
Standard Test Methods for Rubber O-Rings |
ISO 4649:2017
|
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 4666-1:2010
|
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 1: Basic principles |
ASTM E 273 : 2015 : REDLINE
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
ASTM D 5790 : 1995
|
Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
ISO 4666-3:2016
|
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
ASTM E 10 : 2017-05
|
TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
ISO/IEC Guide 25:1990
|
General requirements for the competence of calibration and testing laboratories |
ISO 4666-4:2007
|
Rubber, vulcanized Determination of temperature rise and resistance to fatigue in flexometer testing Part 4: Constant-stress flexometer |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
ISO 31-0:1992
|
Quantities and units Part 0: General principles |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 15156-2:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
ANSI/NCSL Z540 1 : 94(R2002)
|
CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS |
ISO 15156-3:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
ISO 1302:2002
|
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
AWS B2.1 : 2005
|
SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION |
ASTM E 426 : 2016 : REDLINE
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
ISO 15156-1:2015
|
Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
ISO 13665:1997
|
Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
ISO 7743:2017
|
Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
BS 2M 54:1991
|
Specification for temperature control in the heat treatment of metals |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
ASTM E 709 : 2015 : REDLINE
|
Standard Guide for Magnetic Particle Testing |
AWS D1.1/D1.1M : 2015
|
STRUCTURAL WELDING CODE-STEEL |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
ISO 10428:1993
|
Petroleum and natural gas industries — Sucker rods (pony rods, polished rods, couplings and sub-couplings) — Specification |
ASTM D 638 : 2014 : REDLINE
|
Standard Test Method for Tensile Properties of Plastics |
ISO 18265:2013
|
Metallic materials Conversion of hardness values |
ISO 11960:2014
|
Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells |
ISO 1817:2015
|
Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
ISO 12095:1994
|
Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
ISO/IEC Guide 22:1996
|
General criteria for supplier's declaration of conformity |
ASTM D 1418 : 2017 : REDLINE
|
Standard Practice for Rubber and Rubber Latices—Nomenclature |
ASTM E 92 : 2017 : REDLINE
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |