ISO/TR 20172:2009
|
Welding Grouping systems for materials European materials |
ISO 17636-1:2013
|
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 14119:2013
|
Safety of machinery Interlocking devices associated with guards Principles for design and selection |
ISO 10547:2009
|
Polyester fibre ropes Double braid construction |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
ISO 14122-1:2016
|
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
BGR 181 : 2003
|
FUSSBOEDEN IN ARBEITSRAEUMEN UND ARBEITSBEREICHEN MIT RUTSCHGEFAHR |
ISO 1141:2012
|
Fibre ropes Polyester 3-, 4-, 8- and 12-strand ropes |
ISO 11666:2010
|
Non-destructive testing of welds Ultrasonic testing Acceptance levels |
ISO 10042:2005
|
Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
ISO 10325:2009
|
Fibre ropes High modulus polyethylene 8-strand braided ropes, 12-strand braided ropes and covered ropes |
ISO 23277:2015
|
Non-destructive testing of welds Penetrant testing Acceptance levels |
ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
ISO 17635:2016
|
Non-destructive testing of welds — General rules for metallic materials |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
ISO 10556:2009
|
Fibre ropes of polyester/polyolefin dual fibres |
ISO 14120:2015
|
Safety of machinery Guards General requirements for the design and construction of fixed and movable guards |
IEC 60364-4-41:2005+AMD1:2017 CSV
|
Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
ISO 4016:2011
|
Hexagon head bolts Product grade C |
ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
ISO/TR 23849:2010
|
Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
ISO/TR 20173:2009
|
Welding Grouping systems for materials American materials |
ISO 14732:2013
|
Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
ISO 4034:2012
|
Hexagon regular nuts (style 1) Product grade C |
ISO 4413:2010
|
Hydraulic fluid power General rules and safety requirements for systems and their components |
ISO/TR 15608:2017
|
Welding Guidelines for a metallic materials grouping system |
EN 1837:1999+A1:2009
|
Safety of machinery - Integral lighting of machines |
EN 1999-1-1:2007/A2:2013
|
EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
EN 13889:2003+A1:2008
|
Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety |
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
EN 1991-1-3:2003/A1:2015
|
EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-3: GENERAL ACTIONS - SNOW LOADS |
ISO 14731:2006
|
Welding coordination Tasks and responsibilities |
ISO 10572:2009
|
Mixed polyolefin fibre ropes |
ISO 14118:2000
|
Safety of machinery Prevention of unexpected start-up |
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
ISO 4017:2014
|
Fasteners Hexagon head screws Product grades A and B |
IEC 60204-32:2008
|
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
ISO 4032:2012
|
Hexagon regular nuts (style 1) — Product grades A and B |
ISO 9554:2010
|
Fibre ropes General specifications |
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 23278:2015
|
Non-destructive testing of welds Magnetic particle testing Acceptance levels |
ISO 17640:2017
|
Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
DIN 51130:2014-02
|
Testing of floor coverings - Determination of the anti-slip property - Workrooms and fields of activities with slip danger - Walking method - Ramp test |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 10554:2009
|
Polyamide fibre ropes Double braid construction |
ISO 9692-1:2013
|
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ISO 1181:2004
|
Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes |
EN 1069-1:2017
|
Water slides - Part 1: Safety requirements and test methods |
IEC 60364-7-740:2000
|
Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses |
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN 1993-1-4:2006/A1:2015
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
ISO 9692-3:2016
|
Welding and allied processes Types of joint preparation Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
ISO 3834-2:2005
|
Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
ISO/IEC 17020:2012
|
Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
EN 50172:2004
|
Emergency escape lighting systems |
ISO 10474:2013
|
Steel and steel products — Inspection documents |
ISO 13849-2:2012
|
Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
AS 3533.1-2009
|
Amusement rides and devices Design and construction |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ISO 17637:2016
|
Non-destructive testing of welds Visual testing of fusion-welded joints |
ISO 2307:2010
|
Fibre ropes Determination of certain physical and mechanical properties |
ISO 1346:2012
|
Fibre ropes Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) 3-, 4-, 8- and 12-strand ropes |
EN 1261:1995
|
Fibre ropes for general service - Hemp |
ISO 4414:2010
|
Pneumatic fluid power General rules and safety requirements for systems and their components |
GOST R 53130 : 2008
|
SAFETY OF ATTRACTIONS - GENERAL REQUIREMENTS |
EN 1993-1-9:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-9: FATIGUE |
EN 1995-1-1:2004/A2:2014
|
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
ISO 23279:2017
|
Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
ISO 9692-2:1998
|
Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
EN 1992-1-1:2004/A1:2014
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV
|
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
EN 288-9 : 1999
|
SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST FOR PIPELINE WELDING ON LAND AND OFFSHORE SITE BUTT WELDING OF TRANSMISSION PIPELINES |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
EN 1990:2002/A1:2005/AC:2010
|
EUROCODE - BASIS OF STRUCTURAL DESIGN |
EN 1991-1-4:2005/A1:2010
|
EUROCODE 1: ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
EN 10160:1999
|
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
EN 1993-1-8:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 10025-3:2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
ISO 17638:2016
|
Non-destructive testing of welds Magnetic particle testing |
ISO 3834-3:2005
|
Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
IEC 61800-5-2:2016
|
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
GOST 12.2.049 : 1980
|
OCCUPATIONAL SAFETY STANDARDS SYSTEM - INDUSTRIAL EQUIPMENT - GENERAL ERGONOMIC REQUIREMENTS |
EN 1993-1-1:2005/A1:2014
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ISO 4014:2011
|
Hexagon head bolts Product grades A and B |
ISO 4018:2011
|
Hexagon head screws Product grade C |
EN 1776:2015
|
Gas infrastructure - Gas measuring systems - Functional requirements |