Skip to content
Please enter a keyword to search

  • 15/30326284 DC : 0

    NA Status of Standard is Unknown

    BS EN 16907-2 - EARTHWORKS - PART 2: CLASSIFICATION OF MATERIALS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date: 

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviations
    4 Principles of classification
    5 The process of description and classification
    6 Classification by intrinsic parameters
    7 Classification by State Parameters
    8 Characteristics and tests for assessing
       earthworks materials in situ
    9 Sampling of soil and rock
    10 Test standards to support classification
    Annex A (informative) - List of test standards
            relevant to earthworks
    Bibliography

    General Product Information - (Show below) - (Hide below)

    Comment Closes On
    Committee B/526/-/1
    Document Type Draft
    Publisher British Standards Institution
    Status NA

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO/TS 17892-12 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 12: DETERMINATION OF ATTERBERG LIMITS
    EN ISO/TS 17892-10 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 10: DIRECT SHEAR TESTS
    ISO 17313:2004 Soil quality Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
    EN 13286-1:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING
    EN 932-2:1999 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples
    EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing
    ISO/TS 17892-8:2004 Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test
    ISO/TS 17892-9:2004 Geotechnical investigation and testing Laboratory testing of soil Part 9: Consolidated triaxial compression tests on water-saturated soils
    EN ISO 11272:2017 Soil quality - Determination of dry bulk density (ISO 11272:2017)
    EN 932-3:1996/A1:2003 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 3: PROCEDURE AND TERMINOLOGY FOR SIMPLIFIED PETROGRAPHIC DESCRIPTION
    ISO 10381-1:2002 Soil quality Sampling Part 1: Guidance on the design of sampling programmes
    ISO 11272:2017 Soil quality — Determination of dry bulk density
    EN 13286-2:2010/AC:2012 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 2: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PROCTOR COMPACTION
    ISO 17892-5:2017 Geotechnical investigation and testing Laboratory testing of soil Part 5: Incremental loading oedometer test
    EN 14227-14:2006 Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash
    ISO 10693:1995 Soil quality Determination of carbonate content Volumetric method
    EN ISO/TS 17892-8 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 8: UNCONSOLIDATED UNDRAINED TRIAXIAL TEST
    EN 13286-40:2003 Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures
    EN 1744-5:2006 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts
    ISO 14688-1:2002 Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description
    EN 13286-43:2003 Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures
    ISO 11271:2002 Soil quality — Determination of redox potential — Field method
    EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven
    EN ISO/TS 17892-9 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 9: CONSOLIDATED TRIAXIAL COMPRESSION TESTS ON WATER SATURATED SOIL
    EN 14580:2005 Natural stone test methods - Determination of static elastic modulus
    ISO 17892-2:2014 Geotechnical investigation and testing Laboratory testing of soil Part 2: Determination of bulk density
    EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage
    ISO/TS 17892-10:2004 Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests
    EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates - Part 1: Chemical analysis
    EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
    ISO 10381-2:2002 Soil quality Sampling Part 2: Guidance on sampling techniques
    EN 933-9:2009+A1:2013 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
    EN 1097-2:2010 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
    ISO 11277:2009 Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation
    EN ISO 10769:2011 Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011)
    ISO 22475-1:2006 Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution
    EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates
    EN 1367-2:2009 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test
    ISO 17892-6:2017 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test
    ISO 14689-1:2003 Geotechnical investigation and testing Identification and classification of rock Part 1: Identification and description
    EN 13286-47:2012 Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
    EN ISO 11274:2014 Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009)
    ISO 17892-1:2014 Geotechnical investigation and testing Laboratory testing of soil Part 1: Determination of water content
    EN 13286-46:2003 Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the moisture condition value
    ISO/TS 17892-11:2004 Geotechnical investigation and testing Laboratory testing of soil Part 11: Determination of permeability by constant and falling head
    EN 13383-2:2013 Armourstone - Part 2: Test methods
    ISO 14688-2:2004 Geotechnical investigation and testing Identification and classification of soil Part 2: Principles for a classification
    ISO/TS 17892-12:2004 Geotechnical investigation and testing Laboratory testing of soil Part 12: Determination of Atterberg limits
    EN 1926:2006 Natural stone test methods - Determination of uniaxial compressive strength
    EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
    EN 13286-41:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 41: TEST METHOD FOR DETERMINATION OF THE COMPRESSIVE STRENGTH OF HYDRAULICALLY BOUND MIXTURES
    EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
    EN ISO 14689-1 : 2003 GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF ROCK - PART 1: IDENTIFICATION AND DESCRIPTION
    EN 13286-4:2003 UNBOUND AND HYDRAULICALLY BOUND MIXTURES - TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - PART 4: VIBRATING HAMMER
    EN 1997-2:2007/AC:2010 EUROCODE 7 - GEOTECHNICAL DESIGN - PART 2: GROUND INVESTIGATION AND TESTING
    EN 1097-1:2011 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
    EN ISO 17892-2:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of bulk density (ISO 17892-2:2014)
    ISO/R 1076:1969 Withdrawal of ISO/R 1076-1969
    EN 1097-4:2008 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler
    ISO 11274:1998 Soil quality Determination of the water-retention characteristic Laboratory methods
    ISO 10390:2005 Soil quality Determination of pH
    EN 14146:2004 Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
    ISO 10694:1995 Soil quality Determination of organic and total carbon after dry combustion (elementary analysis)
    ISO 14235:1998 Soil quality Determination of organic carbon by sulfochromic oxidation
    EN ISO/TS 17892-7 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 7: UNCONFINED COMPRESSION TEST ON FINE GRAINED SOILS
    EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
    EN ISO 17892-1:2014 Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO 17892-1:2014)
    EN 1097-6:2013 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
    ISO 11048:1995 Soil quality Determination of water-soluble and acid-soluble sulfate
    EN ISO/TS 17892-11 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 11: DETERMINATION OF PERMEABILITY BY CONSTANT AND FALLING HEAD
    EN ISO 10693 : 2014 SOIL QUALITY - DETERMINATION OF CARBONATE CONTENT - VOLUMETRIC METHOD (ISO 10693:1995)
    ISO/TS 17892-7:2004 Geotechnical investigation and testing Laboratory testing of soil Part 7: Unconfined compression test on fine-grained soils
    EN 13383-1:2002/AC:2004 ARMOURSTONE - PART 1: SPECIFICATION
    EN ISO 22475-1:2006 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006)
    ISO 11508:2017 Soil quality — Determination of particle density
    EN 1367-6:2008 Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl)
    ISO 10381-8:2006 Soil quality Sampling Part 8: Guidance on sampling of stockpiles
    ISO 17312:2005 Soil quality Determination of hydraulic conductivity of saturated porous materials using a rigid-wall permeameter
    EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective