ISO 10961:2010
|
Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
ISO 17636-1:2013
|
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
ISO 209:2007
|
Aluminium and aluminium alloys — Chemical composition |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
EN 10025-4:2004
|
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
ISO 1496-1:2013
|
Series 1 freight containers — Specification and testing — Part 1: General cargo containers for general purposes |
ISO 11666:2010
|
Non-destructive testing of welds Ultrasonic testing Acceptance levels |
ISO 10042:2005
|
Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
ISO 23277:2015
|
Non-destructive testing of welds Penetrant testing Acceptance levels |
ISO 15614-2:2005
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
NORSOK R 002 : 2017
|
LIFTING EQUIPMENT |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
NORSOK R 003 REV 3 : 2017
|
SAFE USE OF LIFTING EQUIPMENT |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 1011-1:2009
|
Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding |
ISO 1496-5:1991
|
Series 1 freight containers Specification and testing Part 5: Platform and platform-based containers |
IMO IF110 : 2014 SUPP 2016
|
SOLAS CONSOLIDATED EDITION |
EN 10025-1:2004
|
Hot rolled products of structural steels - Part 1: General technical delivery conditions |
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
EN 10210-1:2006
|
Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
ISO 23278:2015
|
Non-destructive testing of welds Magnetic particle testing Acceptance levels |
ISO 17640:2017
|
Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
EN 1011-2:2001/A1:2003
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS |
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
IMO II200 : 2012 ERRATA/COR 13
|
IMDG CODE, (INC. AMDT 36-12) 2 VOLUMES |
IMO IA811 : 2001
|
MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED |
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
EN 10219-1:2006
|
Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions |
ISO 17636-2:2013
|
Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
ISO 1496-3:1995
|
Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk |
EN 10250-2:1999
|
Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels |
ISO 10474:2013
|
Steel and steel products — Inspection documents |
ISO 10675-2:2017
|
Non-destructive testing of welds — Acceptance levels for radiographic testing — Part 2: Aluminium and its alloys |
ISO 668:2013
|
Series 1 freight containers Classification, dimensions and ratings |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ISO 17637:2016
|
Non-destructive testing of welds Visual testing of fusion-welded joints |
ISO 9001:2015
|
Quality management systems — Requirements |
ISO 1496-4:1991
|
Series 1 freight containers — Specification and testing — Part 4: Non-pressurized containers for dry bulk |
ISO 7500-1:2015
|
Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
AWS D1.1 : 2000
|
STRUCTURAL WELDING CODE - STEEL |
ISO 15607:2003
|
Specification and qualification of welding procedures for metallic materials General rules |
IMO I288 : 2000 SUPP 2008
|
CODE OF SAFE PRACTICE FOR THE CARRIAGE OF CARGOES AND PERSONS BY OFFSHORE SUPPLY VESSELS (OSV CODE) |
ISO 10675-1:2016
|
Non-destructive testing of welds Acceptance levels for radiographic testing Part 1: Steel, nickel, titanium and their alloys |
EN 10025-3:2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
ISO 17638:2016
|
Non-destructive testing of welds Magnetic particle testing |
EN 10250-3:1999
|
Open die steel forgings for general engineering purposes - Part 3: Alloy special steels |
ISO 1161:2016
|
Series 1 freight containers — Corner and intermediate fittings — Specifications |
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |