Skip to content
Please enter a keyword to search

  • AECTP-250 : 2014

    Current The latest, up-to-date edition.

    ELECTRICAL AND ELECTROMAGNETIC ENVIRONMENTAL CONDITIONS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  18-12-2014

    Publisher:  NATO

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies characteristics and sources for electrical and electromagnetic conditions that influence the design and operation of defence materiel.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes STANAG 1307. (07/2010)
    Document Type Standard
    Publisher NATO
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DEFSTAN 59-114(PT3)/1(2012) : 2012 SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 3: ASSESSMENT, SAFETY MARGINS & TRIALS
    AECTP-500 : 2016 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION
    DEFSTAN 59-411(PT1)/2(2014) : 2014 ELECTROMAGNETIC COMPATIBILITY - PART 1: MANAGEMENT AND PLANNING
    DEFSTAN 59-114(PT2)/1(2012) : 2012 SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 2: ELECTRO-EXPLOSIVE DEVICES AND THEIR CHARACTERIZATION
    DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    DEFSTAN 59-114(PT1)/1(2012) : 2012 SAFETY PRINCIPLES FOR ELECTRICAL CIRCUITS IN SYSTEMS INCORPORATING EXPLOSIVE COMPONENTS - PART 1: PRINCIPLES, DESIGN RECOMMENDATIONS AND ELECTRICAL/ELECTROMAGNETIC ENVIRONMENTS
    DEFSTAN 59-188(PT1)/2(2014) : 2014 HIGH ALTITUDE ELECTROMAGNETIC PULSE (HEMP) PROTECTION FOR GROUND BASED COMMUNICATION FACILITIES PERFORMING CRITICAL, TIME-URGENT MISSIONS - PART 1: FIXED FACILITIES
    DEFSTAN 00-035(PT2)/5(2017) : 2017 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL - PART 2: ENVIRONMENTAL TRIALS PROGRAMME DERIVATION AND ASSESSMENT METHODOLOGIES
    DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
    AAP-48 : 2013 NATO SYSTEM LIFE CYCLE STAGES AND PROCESSES
    STANAG 4497 : 2016 HAND-EMPLACED MUNITIONS (HEM), PRINCIPLES FOR SAFE DESIGN
    AAS3P-10 : 2011 SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS
    AAS3P-1 : 2011 ALLIED AMMUNITION SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING PUBLICATION - GUIDANCE
    STANAG 4560 : 2016 ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - AOP-43 EDITION 3
    AEP-41 VOL 7 : 2014 NATO IMPLEMENTATION OF UNIFIED PROTECTION AGAINST ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (UE[3]) - VOLUME 7: SUSTAINMENT TEST AND EVALUATION
    STANAG 4368 : 2011 IGNITION SYSTEMS FOR ROCKET AND GUIDED MISSILE MOTORS, SAFETY DESIGN REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    STANAG 3456 : 0 AIRCRAFT ELECTRICAL POWER SYSTEM CHARACTERISTICS
    IEC 61000-2-10:1998 Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance
    MIL-STD-704 Revision F:2004 AIRCRAFT ELECTRIC POWER CHARACTERISTICS
    STANAG 4334 : 0 ELECTRICAL POWER CONDITIONERS, SOLID STATE, GENERAL PURPOSE FOR INTEROPERABILITY
    DEFSTAN 59-113/2(2012) : 2012 LIGHTNING STRIKE PROTECTION REQUIREMENTS FOR SERVICE AIRCRAFT
    STANAG 4133 : 2008 METHOD OF SPECIFYING ELECTRICAL POWER SUPPLIES - STANDARD TYPES OF ELECTRICAL POWER
    STANAG 3457 : 0 GROUND ELECTRICAL POWER SUPPLIES FOR AIRCRAFT
    DEFSTAN 61-5(PT6)/6(2009) : 2009 NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS
    STANAG 4074 : 2017 AUXILIARY POWER UNIT CONNECTIONS FOR STARTING TACTICAL LAND VEHICLES
    AECP-2 : 2002 NATO NAVAL RADIO AND RADAR RADIATION HAZARDS MANUAL
    STANAG 2601 : 2017 STANDARDIZATION OF ELECTRICAL SYSTEMS IN TACTICAL LAND VEHICLES
    STANAG 3614 : 2002 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E[3]) - REQUIREMENTS FOR AIRCRAFT SYSTEMS AND EQUIPMENT
    STANAG 4135 : 0 ELECTRICAL CHARACTERISTICS OF ROTATING ALTERNATING CURRENT GENERATING SETS
    STANAG 7039 : 2014 TEST PROCEDURES TO ENSURE COMPATIBILITY OF EQUIPMENT WITH AIRCRAFT ELECTRICAL POWER SYSTEMS
    STANAG 2345 : 2015 MILITARY WORKPLACES - FORCE HEALTH PROTECTION REGARDING PERSONNEL EXPOSURE TO ELECTRIC, MAGNETIC, AND ELECTROMAGNETIC FIELDS, 0 HZ TO 300 GHZ
    STANAG 4134 : 2008 ELECTRICAL CHARACTERISTICS OF ROTATING 28-VOLT DC GENERATING SETS
    AECTP-500 : 2016 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION
    CFR 47(PTS0-19) : OCT 2017 TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION
    MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
    DEFSTAN 59-411(PT2)/2(2014) : 2014 ELECTROMAGNETIC COMPATIBILITY - PART 2: THE ELECTRIC, MAGNETIC AND ELECTROMAGNETIC ENVIRONMENT
    AOP 25 : 1999 RATIONALE AND GUIDANCE CONCERNING STANAG 4327, LIGHTNING, MUNITION ASSESSMENT AND TEST PROCEDURES
    IEC 60749-26:2013 Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM)
    MIL-STD-1275 Revision E:2013 CHARACTERISTICS OF 28 VOLT DC INPUT POWER TO UTILIZATION EQUIPMENT IN MILITARY VEHICLES
    STANAG 4145 : 1991 NUCLEAR SURVIVABILITY CRITERIA FOR ARMED FORCES MATERIEL AND INSTALLATIONS - AEP-4
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    STANAG 1008 : 2004 CHARACTERISTICS OF SHIPBOARD ELECTRICAL POWER SYSTEMS IN WARSHIPS OF THE NATO NAVIES
    SAE ARP 5416 : 2013 AIRCRAFT LIGHTNING TEST METHODS
    IEC 61000-2-9:1996 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance. Basic EMC publication
    MIL-STD-331 Revision D:2017 FUZES, IGNITION SAFETY DEVICES AND OTHER RELATED COMPONENTS, ENVIRONMENTAL AND PERFORMANCE TESTS FOR
    AOP 43 : 2016 ELECTRO-EXPLOSIVE DEVICES, ASSESSMENT AND TEST METHODS FOR CHARACTERIZATION - GUIDELINES FOR STANAG 4560
    IEC 61000-2-13:2005 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted
    DIN VDE 0848-1 : 2000 SAFETY IN ELECTRICAL, MAGNETIC AND ELECTROMAGNETIC FIELDS - PART 1: DEFINITIONS, METHODS FOR MEASUREMENT AND CALCULATION
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective