• AS/NZS 5601.2:2013

    AvailableSuperseded An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by SAI Global as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.

    Gas installations LP Gas installations in caravans and boats for non-propulsive purposes

    Available format(s):  Hardcopy, Hardcopy with incorporated amendment, PDF 1 User, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  16-09-2013

    Publisher:  Standards Australia

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies mandatory requirements and means of compliance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.

    Scope - (Show below) - (Hide below)

    This Standard provides the mandatory requirements and means of compliance for the design, installation and commissioning of LP Gas installations in caravans and boats for non-propulsive purposes.

    General Product Information - (Show below) - (Hide below)

    Committee AG-006
    Document Type Standard
    Product Note Amendment No. 2 to AS/NZS 5601.2:2013 corrects errors in the consolidated PDF of AS/NZS 5601.2:2013 that incorporates Amendment No. 1. The other versions are not affected. The Amended Hardcopy edition has been reprinted inclusive of Amendments 1, 2 and 3.
    Publisher Standards Australia
    Status AvailableSuperseded
    Superseded By
    Supersedes
    Under Revision

    History - (Show below) - (Hide below)

    Originated in New Zealand as NZS 5428:1996 and part of NZS 5261:2003.Originated in Australia as part of AS 5601—2004.Previous and first joint edition AS/NZS 5601.2:2010.Second edition 2013. Originated in New Zealand as NZS 5428:1996 and part of NZS 5261:2003. Originated in Australia as part of AS 5601-2004. Previous and first joint edition AS/NZS 5601.2:2010. Second edition 2013. Reissued incorporating Amendment No. 1 (May 2016). Reissued incorporating Amendment No. 2 (March 2017). Reissued incorporating Amendment No. 3 (September 2018).

    Standards Referenced By This Book - (Show below) - (Hide below)

    AS/NZS 1869:2012 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas
    AS 3814-2009 Industrial and commercial gas-fired appliances
    AS/NZS 1734:1997 Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020)
    AS 1432-2004 Copper tubes for plumbing, gasfitting and drainage applications
    AS ISO 7.1-2008 Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation
    AS D26-1972 Tube fittings with dryseal American standard taper pipe and unified threads for automotive and industrial use (imperial units) (Reconfirmed 2018)
    AS 4623-2008 Jointing compounds and materials for use in gas pipe joints
    AS/NZS 3000:2007 Electrical installations (known as the Australian/New Zealand Wiring Rules)
    AS/NZS 2208:1996 Safety glazing materials in buildings
    AS 2738-2000 Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018)
    AS/NZS 1596:2008 The storage and handling of LP Gas
    AS 4629-2005 Automatic shut off valves and vent valves (Reconfirmed 2018)
    AS 4617-2004 Manual shut off gas valves
    AS 4621-2004 Regulators for use with liquefied petroleum - Vapour phase
    AS 1530.1-1994 Methods for fire tests on building materials, components and structures Combustibility test for materials (Reconfirmed 2016)
    AS 3688-2005 Water supply - Metallic fittings and end connectors
    AS 1357.1-2009 Valves primarily for use in heated water systems Protection valves
    AS/NZS 1530.3:1999 Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016)
    AS 2030.1-2009 Gas cylinders General requirements
    AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
    AS/NZS 5601.1:2010 Gas installations General installations

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 4621:2019 Regulator for use with liquefied petroleum - Vapour phase
    AS 4617:2018 Manually operated gas valves
    AS 3645:2017 Essential requirements for gas equipment
    AS 3688:2016 Water supply and gas systems - Metallic fittings and end connectors
    AS 4631:2018 Semi-rigid connectors for gas
    AS/NZS 5263.0:2017 Gas appliances General requirements
    AS 4670:2018 Commercial propane and commercial butane for heating purposes
    AS/NZS 4020:2018 Testing of products for use in contact with drinking water
    AS 4618:2019 Gas appliance regulators
    AS 4809:2017 Copper pipe and fittings - Installation and commissioning
    AS/NZS 4114:2020 Spray painting booths, designated spray painting areas and paint mixing rooms
    AS/NZS 5601.1:2013 Gas installations General installations
    AS/NZS 5263.1.4:2017 Gas Appliances Radiant gas heaters
    AS 4632:2020 Over-pressure and under-pressure shut-off devices
    AS/NZS 1596:2014 The storage and handling of LP Gas
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective