Skip to content
Please enter a keyword to search

  • ASTM A 217/A217M : 2014 : REDLINE

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

    Available format(s):  PDF

    Superseded date:  12-06-2020

    Language(s):  English

    Published date:  01-05-2014

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 01.02, 2017 Describes martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts intended primarily for high-temperature and corrosive service.

    Scope - (Show below) - (Hide below)

    1.1This specification2 covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings, and other pressure-containing parts (Note 1) intended primarily for high-temperature and corrosive service (Note 2).

    1.2One grade of martensitic stainless steel and nine grades of ferritic alloy steel are covered. Selection will depend on design and service conditions, mechanical properties, and the high-temperature and corrosion-resistant characteristics (Note 3).

    Note 1—Carbon steel castings for pressure-containing parts are covered by Specification A216/A216M. Low alloy quench-and-tempered grades equivalent to Specification A217/A217M grades may be found in both Specifications A352/A352M and A487/A487M.
    Note 2—The grades covered by this specification represent materials that are generally suitable for assembly with other castings or wrought steel parts by fusion welding. It is not intended to imply that these grades possess equal degrees of weldability; therefore, it is the responsibility of the purchaser to establish for himself a suitable welding technique. Since these grades possess varying degrees of suitability for high-temperature and corrosion-resistant service, it is also the responsibility of the purchaser to determine which grade shall be furnished, due consideration being given to the requirements of the applicable construction codes.
    Note 3—The committee formulating this specification has included nine grades of materials that are considered to represent basic types of ferritic alloy steels suitable for valves, flanges, fittings, and other pressure-containing parts. Additional alloy steels that may better fulfill certain types of service will be considered for inclusion in this specification by the committee as the need becomes apparent.

    1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

    General Product Information - (Show below) - (Hide below)

    Committee A 01
    Development Note Supersedes ASTM A 157 and ASTM A 217 (04/2002)
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    DOD-HDBK-249 Revision A:1984 METALS AND ALLOYS RAPID ON-SITE IDENTIFICATION OF (RECOMMENDED PROCEDURE FOR CHEMICAL SPOT TESTING AND ASSOCIATED PHYSICAL TESTS TO VERIFY METAL ALLOY CLASSIFICATION) (METRIC)
    I.S. EN ISO 10439:2002 PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS
    BS ISO 4991:2015 Steel castings for pressure purposes
    ASTM A 609/A609M : 2012 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
    00/716563 DC : DRAFT NOV 2000 EN 1759-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 1: STEEL FLANGES, NPS 1/2 TO 24
    10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    MIL-DTL-18030 Revision F:2018 Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation)
    MIL-DTL-16356 Revision E:2013 GAUGES, DIRECT READING, OBLONG GLASS
    API 621 RUSSIAN : 2010 PIPELINE VALVES - RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
    ASTM F 1565 : 2000 : R2013 Standard Specification for Pressure-Reducing Valves for Steam Service
    MSS SP 55 : 2011 QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES
    DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    BS EN ISO 10439:2002 Petroleum, chemical and gas service industries. Centrifugal compressors
    ASME B16.34 : 2017 VALVES - FLANGED, THREADED, AND WELDING END
    PIP PCECV001 : 2016 GUIDELINES FOR APPLICATION OF CONTROL VALVES
    BS 1560-3.1:1989 Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for steel flanges
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    ENA TS 56-1 : ISSUE 2 1989 FERRITIC STEEL VALVE CASTING
    API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
    BS 4504-3.1:1989 Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges
    API 594 RUSSIAN : 2004 CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING
    MSS SP 118 : 2007 COMPACT STEEL GLOBE & CHECK VALVES - FLANGED, FLANGELESS, THREADED & WELDING ENDS (CHEMICAL & PETROLEUM REFINERY SERVICE)
    ASTM F 1508 : 1996 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
    ASTM A 609/A609M : 2012 : R2018 Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
    ASTM F 1508 : 1996 : R2010 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    ASME B31.1 : 2016 POWER PIPING
    ASME B31.4 : 2016 PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
    ASME B31.3:2016 PROCESS PIPING
    BS 5157:1989 Specification for steel gate (parallel slide) valves
    ASTM F 1565 : 2000 : R2019 Standard Specification for Pressure-Reducing Valves for Steam Service
    ESI 56-1 : ISSUE 2 FERRITIC STEEL VALVE CASTINGS
    MIL-DTL-18110 Revision G:2018 VALVES, GATE TYPE, STEEL SIZES 2[1/2] INCHES TO 16 INCHES
    Z245.15-17 Steel valves
    ASTM F 1565 : 2000 : R2006 Standard Specification for Pressure-Reducing Valves for Steam Service
    ASTM F 1565 : 2000 Standard Specification for Pressure-Reducing Valves for Steam Service
    BS EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service
    UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
    UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
    UNI EN ISO 13705 : 2013 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
    API 6H : 1998 : R2011 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
    API std 602 : 2015 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
    13/30252103 DC : 0 BS ISO 4991 - STEEL CASTINGS FOR PRESSURE PURPOSES
    API 621 REDLINE : 2010 RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
    10/30214867 DC : 0 BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
    API 594 CHINESE : 2004 CHECK VALVES: FLANGED, LUG, WAFER AND BUTT-WELDING
    API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
    MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    AISC N690 : 2015 SPECIFICATION FOR SAFETY-RELATED STEEL STRUCTURES FOR NUCLEAR FACILITIES
    ASTM F 1508 : 1996 : R2004 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
    API STD 602 : 2015+ERR 1 : 2016 GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES
    ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
    ISO 13705:2012 Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
    BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012)
    EN ISO 10439:2002 Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
    API 621 : 2010 RECONDITIONING OF METALLIC GATE, GLOBE, AND CHECK VALVES
    MIL-DTL-20065 Revision E:2016 VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    API 594 REDLINE : 2010 CHECK VALVES: FLANGED, LUG, WAFER, AND BUTT-WELDING
    API 6H : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
    API 6H CHINESE : 1998 SPECIFICATION ON END CLOSURES, CONNECTORS AND SWIVELS
    MIL-STD-777 Revision F:2012 SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS
    BIS IS 3038 : 2006 MARTENSITIC STAINLESS STEEL AND ALLOY STEEL CASTINGS FOR PRESSURE CONTAINING PARTS SUITABLE FOR HIGH TEMPERATURE SERVICE - SPECIFICATION
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    ASTM F 1508 : 1996 : R2016 : EDT 1 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
    ASTM A 297/A297M : 2017 : REDLINE Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    ASME B31.5 : 2016 REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS
    ASME B31.3 SPANISH : 2010 PROCESS PIPING

    Standards Referencing This Book - (Show below) - (Hide below)

    AWS A5.5/A5.5M : 2014 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
    AWS A5.23/A5.23M : 2011 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
    AWS A5.29/A5.29M : 2010 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING
    ASTM E 709 : 2015 : REDLINE Standard Guide for Magnetic Particle Testing
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective