Skip to content
Please enter a keyword to search

  • ASTM A 700 : 2014

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment

    Available format(s):  Hardcopy, PDF

    Superseded date:  12-11-2019

    Language(s):  English

    Published date:  01-11-2014

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 01.05, 2017 Defines the packaging, marking, and loading of steel products for shipment. Assuming proper handling in transit, this guide is intended to assist shippers in packaging and loading steel products to arrive at their destination safely and in good condition.

    Scope - (Show below) - (Hide below)

    1.1This guide covers the packaging, marking, and loading of steel products for shipment. Assuming proper handling in transit, this guide is intended to assist shippers in packaging and loading steel products to arrive at their destination safely and in good condition. It is also intended that this guide may be used for attaining uniformity, simplicity, sufficiency, and economy in the shipment of steel products.

    1.2This guide applies to semi-finished steel products, bars, structural shapes and sheet piling, rods, wire and wire products, tubular products, plates, sheets, and strips, tin mill products, and castings.

    1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

    1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee A 01
    Development Note Supersedes MIL STD 163 (C). (02/2008)
    Document Type Guide
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM A 135 : 2005 Standard Specification for Electric-Resistance-Welded Steel Pipe
    ASTM A 392 : 2011 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
    MIL-S-6758 Revision B:1993 STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)
    RR-W-410 Revision H:2015 WIRE ROPE AND STRAND
    ASTM A 749/A749M : 2014 : REDLINE Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
    ASTM A 853 : 2004 Standard Specification for Steel Wire, Carbon, for General Use
    MIL-S-23284 Revision A:1990 STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES)
    ASTM A 623M : 2016 : REDLINE Standard Specification for Tin Mill Products, General Requirements [Metric]
    ASTM A 752 : 2004 : R2010 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel (Withdrawn 2011)
    ASTM A 417 : 1993 : R1998 Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units
    MIL-S-8844 Revision D:1987 STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY
    ASTM A 641/A641M : 2009 : REV A Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
    AASHTO M 54M/M 54 : 2007 : R2012 SPECIFICATION FOR WELDED DEFORMED STEEL BAR MATS FOR CONCRETE REINFORCEMENT
    AASHTO M 329M/M 329 : 2011 SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT
    ASTM A 876/A876M : 1998 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
    AASHTO M 329M/M 329 : 2011 : R2015 SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT
    AASHTO M 221M/M 221 : 2009 : R2013 SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT, DEFORMED, FOR CONCRETE
    ASTM A 1085 : 2013 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
    ASTM A 500/A500M : 2018 : REDLINE Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
    ASTM A 500 : 2003 : REV A Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
    ASTM A 135/A135M : 2009 : R2014 Standard Specification for Electric-Resistance-Welded Steel Pipe
    ASTM A 713 : 2004 : R2017 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
    ASTM A 230/A230M : 2005 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
    ASTM A 905 : 2004 : R2010 Standard Specification for Steel Wire, Pressure Vessel Winding
    ASTM A 809 : 2008 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
    ASTM A 121 : 2013 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
    ASTM A 714 : 1999 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
    ASTM F 1183 : 1996 : R2002 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    ASTM A 726M : 1992 Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semi-Processed Types [Metric] (Withdrawn 1998)
    ASTM A 752M : 2004 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
    ASTM A 1085/A1085M : 2015 : REDLINE Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
    ASTM A 1069/A1069M : 2016 : REDLINE Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes
    ASTM A 600 : 1992 : REV A : R2010 Standard Specification for Tool Steel High Speed
    ASTM A 1 : 2000 : R2010 Standard Specification for Carbon Steel Tee Rails
    ASTM A 3 : 2001 : R2006 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
    ASTM A 996/A996M : 2016 : REDLINE Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
    ASTM A 1028 : 2003 : R2015 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils (Withdrawn 2021)
    ASTM A 840/A840M : 2000 Standard Specification for Fully Processed Magnetic Lamination Steel
    ASTM A 854/A854M : 2008 : R2017 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
    ANSI B11.18 : 2006 SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL
    ASTM A 726 : 2005 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
    ASTM A 682/A682M : 2005 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009)
    ASTM A 546 : 1982 : EDT 1 Specification for Steel Wire, Medium-High-Carbon, Cold-Heading Quality, for Hexagon-Head Bolts
    ASTM A 67 : 2000 : R2010 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
    ASTM A 392 : 2011 : REV A Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
    ASTM A 1086 : 2013 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types
    MIL-STD-163 Revision C:1978 STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE
    ASTM A 641/A641M : 2009 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
    ASTM A 847 : 1999 : REV A : R2003 Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
    ASTM A 618/A618M : 2004 : R2015 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
    ASTM A 549 : 1982 Specification for Steel Wire, Carbon, Cold-Heading Quality, for Wood Screws
    ASTM A 232/A232M : 2005 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
    AASHTO M 322M/M 322 : 2010 SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT
    ASTM A 856/A856M : 2003 : R2014 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
    ASTM A 824 : 2001 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
    ASTM A 600 : 1992 : REV A : R2016 Standard Specification for Tool Steel High Speed
    ASTM A 530/A530M : 2012-06 SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE
    ASTM A 818 : 2006 : R2016 Standard Specification for Coppered Carbon Steel Wire
    ASTM A 999/A999M : 2018 : REDLINE Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
    ASTM A 1059/A1059M : 2008 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
    ASTM A 713 : 2004 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
    ASTM F 1665 : 2008 : R2013 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
    ASTM A 500 : 2003 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
    ASTM A 853 : 2004 : R2010 Standard Specification for Steel Wire, Carbon, for General Use
    ASTM A 702 : 2013-11 SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT
    ASTM A 599/A599M : 2007 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
    ASTM A 66 : 2007 Standard Specification for Steel Screw Spikes
    ASTM A 752 : 2004 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
    ASTM A 623 : 2016 : REDLINE Standard Specification for Tin Mill Products, General Requirements
    ASTM A 135/A135M : 2009 Standard Specification for Electric-Resistance-Welded Steel Pipe
    ASTM E 510 : 1979 Recommended Practice for Determining Pavement Surface Frictional and Polishing Characteristics Using a Small Torque Device (Withdrawn 1985)
    ASTM A 764 : 2007 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
    ASTM A 764 : 2007 : R2017 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
    ASTM A 615/A615M : 2016-03 SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT
    ASTM A 818 : 2006 : R2010 Standard Specification for Coppered Carbon Steel Wire
    ASTM A 686 : 1992 : R2004 Standard Specification for Tool Steel, Carbon
    ASTM A 854/A854M : 2008 : R2013 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
    ASTM F 1665 : 2008 : R2018 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
    ASTM F 1345 : 2010 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
    ASTM A 1028 : 2003 : R2009 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
    ASTM A 29/A29M : 2016 : REDLINE Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
    ASTM A 726 : 2005 : R2010 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
    ASTM F 1183 : 1996 : R2006 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    ASTM F 1665 : 2008 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
    ASTM A 681 : 2008 : R2015 Standard Specification for Tool Steels Alloy
    ASTM A 390 : 2006 : R2016 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
    ASTM A 510/A510M : 2018 : REDLINE Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
    ANSI B11.18 : 2006 : R2012 SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL
    AASHTO M 281 : 1996 SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES, HOT-WROUGHT
    AASHTO M 55M/M 55 : 2013 METHOD OF TEST FOR STEEL WELDED WIRE REINFORCEMENT, PLAIN, FOR CONCRETE
    AASHTO M 334M/M 334 : 2017 SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN CHROMIUM ALLOYED, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS
    AASHTO M 280 : 2014 SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE
    ASTM A 793 : 1996 : R2009 Standard Specification for Rolled Floor Plate, Stainless Steel
    ASTM A 67 : 2000 : R2005 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
    SAE AMS S 6758 : 2017 STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY)
    ASTM A 706/A706M : 2016 : REDLINE Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
    ASTM A 407 : 2007 : R2013 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
    ASTM A 684/A684M : 2017 : REDLINE Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
    ASTM A 905 : 2004 : R2017 Standard Specification for Steel Wire, Pressure Vessel Winding
    ASTM A 617/A617M : 1996 SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT
    NAVSEA T9074 BD GIB 010/0300 : 0 BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100
    ASTM A 648 : 2018 : REDLINE Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
    ASTM A 793 : 1996 : R2014 Standard Specification for Rolled Floor Plate, Stainless Steel (Withdrawn 2023)
    ASTM A 725M : 1984 Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed, Types 27H168M, 30H183M, 35H207M (Withdrawn 1988)
    ASTM A 1000 : 2005 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
    ASTM A 1099/A1099M : 2017 Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
    ASTM A 184/A184M : 2017 : REDLINE Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
    MIL-S-24093 Revision A:1991 STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED
    ASTM A 947M : 2016 : REDLINE Standard Specification for Textured Stainless Steel Sheet [Metric]
    ASTM A 769/A769M : 2017 : REDLINE Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
    ASTM A 809 : 2008 : R2013 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
    NASA KSC SPEC P 0027 : 2010 TUBING, SUPERAUSTENITIC STEEL, CORROSION RESISTANT, UNS N08367 AND UNS S31254, SEAMED, BRIGHT ANNEALED, PASSIVATED, SPECIFICATION FOR
    ASTM A 878/A878M : 2017-09 SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY
    ASTM A 795/A795M : 2013 : REDLINE Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
    ASTM A 1 : 2000 Standard Specification for Carbon Steel Tee Rails
    ASTM A 817 : 2012 : R2017 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
    ASTM A 681:2008 Standard Specification for Tool Steels Alloy
    ASTM A 824 : 2001 : R2017 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
    ASTM A 865/A865M : 2006 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
    ASTM A 809 : 2008 : R2017 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
    ASTM A 686 : 1992 : R2016 Standard Specification for Tool Steel, Carbon
    ASTM A 555/A555M : 2016 : REDLINE Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
    ASTM A 600 : 1992 : REV A : R1999 Standard Specification for Tool Steel High Speed
    ASTM F 1183 : 1996 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    ASTM F 1267 : 2015-12 SPECIFICATION FOR METAL, EXPANDED, STEEL
    ASTM A 2 : 2002 : R2014 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
    ASTM A 865/A865M : 2006 : R2012 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
    ASTM A 491 : 2011 : R2017 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
    ASTM A 641/A641M : 2009 : REV A : R2014 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
    ASTM A 824 : 2001 : R2012 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
    ASTM A 116 : 2011 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
    ASTM A 817 : 2012 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
    ASTM A 525 : 1993 Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994)
    QQ-T-580 Revision C:1977 TOOL STEEL, CARBON AND CARBON VANADIUM
    ASTM A 618/A618M : 2004 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
    ASTM A 65 : 2007 : R2013 Standard Specification for Steel Track Spikes (Withdrawn 2022)
    QQ-T-570 Revision C:1977 TOOL STEEL, ALLOY
    AASHTO MP 18M/MP 18 : 1900 SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS
    ASTM A 417 : 1993 : R2004 Standard Specification for Steel Wire, Cold-Drawn, for Zig-Zag, Square-Formed, and Sinuous-Type Upholstery Spring Units (Withdrawn 2008)
    ASTM A 793 : 1996 Standard Specification for Rolled Floor Plate, Stainless Steel
    IFI 140 : 2000 CARBON AND ALLOY STEEL WIRE, RODS AND BARS FOR MECHANICAL FASTENERS
    ASTM A 67 : 2000 : R2016 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
    ASTM F 547 : 2017 : REDLINE Standard Terminology of Nails for Use with Wood and Wood-Base Materials
    ASTM A 2 : 2002 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
    ASTM A 865 : 2003 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
    AASHTO M 275M/M 275 : 2008 : R2012 SPECIFICATION FOR UNCOATED HIGH-STRENGTH STEEL BARS FOR PRESTRESSING CONCRETE
    ASTM A 792M : 1993 Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot Dip Process, General Requirements (Metric) (Withdrawn 1994)
    AASHTO M 31M/M 31 : 2015 STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT
    ASTM F 1183 : 1996 : R2011 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    AASHTO M 279 : 2014 SPECIFICATION FOR METALLIC-COATED, STEEL WOVEN WIRE FENCE FABRIC
    ASTM A 1028 : 2003 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils
    ASTM A 686 : 1992 : R1999 Standard Specification for Tool Steel, Carbon
    ASTM A 67 :2000 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked
    ASTM A 618/A618M : 2004 : R2010 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
    ASTM A 677 : 2016 : REDLINE Standard Specification for Nonoriented Electrical Steel Fully Processed Types
    ASTM A 677/A677M : 1999 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
    ASTM A 818 : 2006 Standard Specification for Coppered Carbon Steel Wire
    ASTM A 714 : 1999 : R2009 : EDT 1 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe (Withdrawn 2014)
    ASTM A 1 : 2000 : R2005 Standard Specification for Carbon Steel Tee Rails
    ASTM A 1 : 2000 : R2018 Standard Specification for Carbon Steel Tee Rails
    ASTM A 877/A877M : 2017 : REDLINE Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
    ASTM F 1345 : 2010 : REV A Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
    ASTM A 821/A821M : 2015 : REDLINE Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
    ASTM A 856/A856M : 2003 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
    ASTM A 635/A635M : 2015 : REDLINE Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
    ASTM A 752M : 2004 : R2010 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011)
    ASTM A 2 : 2002 : R2008 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
    ASTM A 1059/A1059M : 2008 : R2013 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
    ASTM A 3 : 2001 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
    MIL-S-23008 Revision D:1988 STEEL CASTINGS, ALLOY, HIGH YIELD STRENGTH ((HY-80 AND HY-100)
    ASTM A 713 : 2004 : R2010 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
    ASTM A 407 : 2007 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
    ASTM A 683 : 2016 : REDLINE Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
    ASTM A 390 : 2006 : R2011 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
    AASHTO M 32M/M 32 : 2009 SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
    ASTM A 599/A599M : 2007 : R2012 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
    AASHTO M 32M/M 32 : 2009 : R2013 SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
    ASTM A 392 : 2011 : REV A : R2017 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
    ASTM F 1183 : 1996 : R2017 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
    ASTM A 686 : 1992 : R2010 Standard Specification for Tool Steel, Carbon
    ASTM A 901 : 2012 : REDLINE Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
    ASTM A 759 : 2010 Standard Specification for Carbon Steel Crane Rails
    ASTM A 230/A230M : 2005 : R2011 : EDT 1 Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
    ASTM A 232/A232M : 2005 : R2011 : EDT 1 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
    IFI 153 : 2003 STAINLESS STEEL WIRE AND RODS FOR MECHANICAL FASTENERS
    ASTM A 116 : 2011 : R2016 Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
    AASHTO M 322M/M 322 : 2010 : R2015 SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT
    AASHTO M 225M/M 225 : 2009 : R2013 SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT
    ASTM A 683/A683M : 1999 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
    ASTM A 945/A945M : 2016 : REDLINE Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
    ASTM F 1083 : 2016-02 SPECIFICATION FOR PIPE, STEEL, HOT-DIPPED ZINC-COATED (GALVANIZED) WELDED, FOR FENCE STRUCTURES
    ASTM A 905 : 2004 Standard Specification for Steel Wire, Pressure Vessel Winding
    ASTM A 665 : 75(1979) SPECIFICATION FOR FLAT-ROLLED, GRAIN-ORIENTED, SILICON IRON, ELECTRICAL STEEL, FULLY PROCESSED TYPES 23G048, 27G053, AND 35G066
    ASTM A 714 : 1999 : R2003 Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
    ASTM A 501/A501M : 2014 : REDLINE Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
    ASTM A 183 : 2014 : REDLINE Standard Specification for Carbon Steel Track Bolts and Nuts
    ASTM A 66 : 2007 : R2013 Standard Specification for Steel Screw Spikes
    ASTM A 854/A854M : 2008 Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
    ASTM A 390:2006 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
    ASTM A 764 : 2007 : R2012 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
    ASTM A 505 : 2016 : REDLINE Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
    ASTM A 65 : 2007 Standard Specification for Steel Track Spikes
    ASTM A 853 : 2004 : R2017 Standard Specification for Steel Wire, Carbon, for General Use
    ASTM A 793 : 1996 : R2001 Standard Specification for Rolled Floor Plate, Stainless Steel
    ASTM A 778/A778M : 2016 : REDLINE Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
    ASTM A 856/A856M : 2003 : R2009 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
    ASTM A 840/A840M : 2000 : R2006 Standard Specification for Fully Processed Magnetic Lamination Steel (Withdrawn 2011)
    ASTM A 759 : 2010 : R2016 Standard Specification for Carbon Steel Crane Rails
    ASTM A 847/A847M : 2014 : REDLINE Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
    ASTM A 3 : 2001 : R2012 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
    ASTM A 600 : 1992 : REV A : R2004 Standard Specification for Tool Steel High Speed
    ASTM F 1345 : 2010 : REV A : R2015 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
    ASTM A 599/A599M : 2007 : R2017 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
    ASTM A 824 : 2001 : R2007 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
    ASTM A 491 : 2011 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 3953 : 2006 Standard Specification for Strapping, Flat Steel and Seal
    ASTM D 3950 : 2010 : REV B Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4169 : 2016 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3950 : 2017 : REDLINE Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4169 : 2016 : REDLINE Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 4649 : 2003 : R2016 Standard Guide for Selection and Use of Stretch Wrap Films
    ASTM D 4169 : 2005 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3953 : 2007 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3950 : 2001 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 3953 : 2015 : REDLINE Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3950 : 2010 : REV A Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 3953 : 1991 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3950 : 2016 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 3950 : 2007 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4169 : 1999 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 4675 : 2009 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3953 : 2012 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3953 : 2015 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 4675 : 2006 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3950 : 2004 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 3950 : 2009 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4169 : 2001 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3950 : 2005 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 996 : 2016 : REDLINE Standard Terminology of Packaging and Distribution Environments
    ASTM D 5728 : 2000 : R2006 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
    ASTM D 3953 : 2005 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 4169 : 2004 : REV A Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3950 : 2009 : REV A Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4169 : 2001 : EDT 1 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3950 : 2011 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4649 : 2003 : R2009 Standard Guide for Selection and Use of Stretch Wrap Films
    ASTM D 5728 : 2000 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
    ASTM D 4675 : 2003 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3953 : 2007 : REV A Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 5728 : 2012 : REDLINE Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
    ASTM D 4169 : 2004 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 4169 : 2008 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3950 : 2006 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4675 : 2000 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 5728 : 2012 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
    ASTM D 3950 : 2017 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4675 : 2006 : EDT 1 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 4675 : 2006 : EDT 2 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 4675 : 2009 : EDT 1 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 4169 : 2014 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3950 : 2012 : REV A Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4675 : 2014 Standard Guide for Selection and Use of Flat Strapping Materials
    ASTM D 3950 : 2010 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 3953 : 2002 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 3950 : 2000 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
    ASTM D 4169 : 2009 Standard Practice for Performance Testing of Shipping Containers and Systems
    ASTM D 3953 : 2013 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 4649 : 2003 Standard Guide for Selection and Use of Stretch Wrap Films
    ASTM D 3953 : 1997 Standard Specification for Strapping, Flat Steel and Seals
    ASTM D 4675 : 2014 : REV A Standard Guide for Selection and Use of Flat Strapping Materials1
    ASTM D 4649 : 2000 Standard Guide for Selection and Use of Stretch Wrap Films
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective