ASTM C 1257 : 1994
|
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
ASTM C 711 : 2022
|
Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants |
ASTM C 1382 : 2002
|
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM E 1323 : 2015
|
Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM C 792 : 2023
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
ASTM C 1367 : 2006 : R2012
|
Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
ASTM C 712 : 2014
|
Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants |
ASTM C 1519 : 2010
|
Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
ASTM C 1184 : 2000 : REV A
|
Standard Specification for Structural Silicone Sealants |
ASTM D 2452 : 2003 : R2009
|
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
ASTM C 794 : 2018
|
Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
ASTM C 719 : 2022
|
Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
ASTM C 1442 : 2011
|
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
ASTM C 1248 : 2004
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM C 1241 : 2000 : R2009
|
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
ASTM D 2203 : 2001 : R2023
|
Standard Test Method for Staining from Sealants |
ASTM C 1246 : 2000 : R2012
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
ASTM C 1519 : 2004
|
Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
ASTM C 661 : 2015 : R2022
|
Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
ASTM C 1184 : 2018 : EDT 1
|
Standard Specification for Structural Silicone Sealants |
ASTM C 1241 : 2014
|
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
ASTM C 1087 : 2023
|
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM E 1323 : 1989 : R1994 : EDT 1
|
Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM E 1323 : 1989 : R2002
|
Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM C 1635 : 2022
|
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension |
ASTM C 1265 : 1994 : R2011
|
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1294 : 2015
|
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
ASTM C 712 : 2022
|
Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants |
ASTM C 1183 : 1991 : R1997
|
Standard Test Method for Extrusion Rate of Elastomeric Sealants |
ASTM C 1367 : 2001
|
Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear |
ASTM C 1135 : 2000 : R2011
|
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1382 : 2011
|
Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM C 731 : 2015 : R2022
|
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants |
ASTM C 1367 : 2019
|
Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
ASTM C 1311 : 2002
|
Standard Specification for Solvent Release Sealants |
ASTM D 2202 : 2000 : R2010
|
Standard Test Method for Slump of Sealants |
ASTM C 1216 : 1992 : R1997
|
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants |
ASTM C 1184 : 2018
|
Standard Specification for Structural Silicone Sealants |
ASTM C 1087 : 2000
|
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM D 2453 : 2003
|
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
ASTM D 2203 : 2001 : R2007
|
Standard Test Method for Staining from Sealants |
ASTM C 1294 : 2007 : EDT 1
|
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
ASTM C 731 : 2015
|
Standard Test Method for Extrudability, After Package Aging, of Latex Sealants |
ASTM C 661 : 2015
|
Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer |
ASTM C 910 : 2016 : R2021
|
Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants |
ASTM C 1265 : 1994 : R2005 : EDT 1
|
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 834 : 2017 : R2023
|
Standard Specification for Latex Sealants |
ASTM C 1311 : 1995
|
Standard Specification for Solvent Release Sealants |
ASTM C 1501 : 2009
|
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM C 1635 : 2014
|
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension |
ASTM C 1294 : 2007
|
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
ASTM C 1241 : 2000 : R2005
|
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
ASTM C 1248 : 2008 : R2012
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM D 2377 : 2000 : R2008
|
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
ASTM C 1257 : 2006
|
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
ASTM C 1501 : 2019
|
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM C 1367 : 1997
|
Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear |
ASTM D 2202 : 2000 : R2006
|
Standard Test Method for Slump of Sealants |
ASTM C 1135 : 2019
|
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM D 2377 : 2000 : R2006
|
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
ASTM C 1265 : 2017
|
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1248 : 2006
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM D 2202 : 2000
|
Standard Test Method for Slump of Sealants |
ASTM C 1501 : 2004
|
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM C 1311 : 2010
|
Standard Specification for Solvent Release Sealants |
ASTM C 1248 : 2022
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM D 2452 : 1994 : R1999 : EDT 1
|
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
ASTM C 1311 : 2014
|
Standard Specification for Solvent Release Sealants |
ASTM C 1216 : 2003 : R2008
|
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants |
ASTM C 1442 : 2014 : R2021
|
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
ASTM C 1501 : 2014
|
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM C 1257 : 2006 : REV A
|
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
ASTM D 2377 : 2014
|
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
ASTM C 1247 : 2014
|
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
ASTM C 1247 : 2009
|
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
ASTM C 1519 : 2002
|
Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
ASTM C 1589 : 2005
|
Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
ASTM D 2203 : 2001 : R2018
|
Standard Test Method for Staining from Sealants |
ASTM C 1184 : 2000 : REV A : EDT 1
|
Standard Specification for Structural Silicone Sealants |
ASTM C 1135 : 2000 : R2005
|
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 834 : 2017
|
Standard Specification for Latex Sealants |
ASTM C 732 : 2017 : R2022
|
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants |
ASTM D 2203 : 1993
|
Standard Test Method for Staining from Sealants |
ASTM C 1635 : 2016
|
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension |
ASTM C 1442 : 2014
|
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
ASTM E 1323 : 2009
|
Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
ASTM C 1246 : 2017
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
ASTM C 1247 : 1998
|
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
ASTM C 1246 : 2017 : R2022
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
ASTM C 1367 : 2006
|
Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
ASTM C 736 : 2012 : R2022
|
Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants |
ASTM C 1294 : 1995
|
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
ASTM C 1442 : 2006
|
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
ASTM D 2453 : 2015
|
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
ASTM C 1135 : 2000
|
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 794 : 2018 : R2022
|
Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants |
ASTM C 1382 : 2005
|
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM C 1135 : 2015
|
Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM E 1580 : 1993 : R2002
|
Standard Guide for Surveillance of Accredited Laboratories (Withdrawn 2008) |
ASTM C 711 : 2014
|
Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants |
ASTM C 910 : 2016
|
Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants |
ASTM D 2203 : 2001 : R2011
|
Standard Test Method for Staining from Sealants |
ASTM C 1183 : 2004
|
Standard Test Method for Extrusion Rate of Elastomeric Sealants |
ASTM D 2202 : 2000 : R2014
|
Standard Test Method for Slump of Sealants |
ASTM C 1183 : 2004 : R2008
|
Standard Test Method for Extrusion Rate of Elastomeric Sealants |
ASTM E 1301 : 1995 : EDT 1
|
Standard Guide for Proficiency Testing by Interlaboratory Comparisons |
ASTM D 2453 : 1999
|
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
ASTM C 719 : 2014 : R2019
|
Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) |
ASTM C 1087 : 2016
|
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1519 : 2002 : REV A
|
Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
ASTM C 732 : 2017
|
Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants |
ASTM C 1265 : 1994 : R1999
|
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM D 2453 : 2015 : R2020 : EDT 1
|
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
ASTM C 1257 : 2004
|
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
ASTM C 1087 : 2000 : R2011
|
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 679 : 2015 : R2022
|
Standard Test Method for Tack-Free Time of Elastomeric Sealants |
ASTM C 1442 : 2003
|
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
ASTM C 792 : 2015 : R2020
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants |
ASTM D 2377 : 2000
|
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
ASTM C 793 : 2023
|
Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
ASTM C 1519 : 2010 : R2017
|
Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
ASTM D 2452 : 2003
|
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
ASTM C 1311 : 2022
|
Standard Specification for Solvent Release Sealants |
ASTM E 1580 : 1993
|
Standard Guide for Surveillance of Accredited Laboratories |
ASTM C 1257 : 2015
|
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
ASTM C 1294 : 2001
|
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
ASTM C 1247 : 2020
|
Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids |
ASTM C 1635 : 2006
|
Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension |
ASTM C 1241 : 2014 : R2022
|
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
ASTM C 1248 : 2018
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM C 1382 : 1997
|
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM C 1382 : 2004
|
Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM C 1294 : 2007 : R2011
|
Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials |
ASTM C 510 : 2016
|
Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants |
ASTM C 1257 : 2006 : REV A : R2012
|
Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
ASTM C 1216 : 2003
|
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants |
ASTM C 1382 : 2016
|
Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM C 679 : 2015
|
Standard Test Method for Tack-Free Time of Elastomeric Sealants |
ASTM C 1589 : 2004
|
Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
ASTM D 2452 : 2015(R2019)
|
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
ASTM C 1265 : 2022
|
Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications |
ASTM C 1184 : 2005
|
Standard Specification for Structural Silicone Sealants |
ASTM C 510 : 2016 : R2022
|
Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants |
ASTM C 1241 : 2000
|
Standard Test Method for Volume Shrinkage of Latex Sealants During Cure |
ASTM C 793 : 2005 : R2017
|
Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
ASTM C 1442 : 1999
|
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus |
ASTM C 1246 : 2000
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
ASTM C 1246 : 2000 : R2006
|
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure |
ASTM C 1248 : 2008
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM C 1087 : 2000 : R2006 : EDT 1
|
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1087 : 2000 : R2006
|
Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1519 : 2010 : R2022
|
Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
ASTM D 2377 : 2014 : R2019
|
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants |
ASTM C 1184 : 2013
|
Standard Specification for Structural Silicone Sealants |
ASTM D 2202 : 2000 : R2019
|
Standard Test Method for Slump of Sealants |
ASTM C 1184 : 2014
|
Standard Specification for Structural Silicone Sealants |
ASTM C 712 : 2014 : R2021
|
Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants |
ASTM C 1382 : 2016 : R2023
|
Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
ASTM D 2203 : 2001
|
Standard Test Method for Staining from Sealants |
ASTM C 1248 : 1993 : R1998
|
Standard Test Method for Staining of Porous Substrate by Joint Sealants |
ASTM C 736 : 2012 : R2017
|
Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants |
ASTM C 1501 : 2001
|
Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures |
ASTM D 2453 : 2003 : R2009
|
Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds |
ASTM D 2452 : 2015
|
Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds |
ASTM E 1301 : 1995 : R2003
|
Standard Guide for Proficiency Testing by Interlaboratory Comparisons (Withdrawn 2003) |