Skip to content
Please enter a keyword to search

  • ASTM D 4896 : 2001 : R2016

    Current The latest, up-to-date edition.

    Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-05-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 15.06, 2016 Describes the safe and appropriate use of strength values obtained from test methods using single-lap adhesive joint specimens.

    Scope - (Show below) - (Hide below)

    1.1This guide is directed toward the safe and appropriate use of strength values obtained from test methods using single-lap adhesive joint specimens.

    1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

    1.3The discussion focuses on shear strength as measured with small thin-adherend, single-lap specimens. Many factors, however, apply to shear modulus, tensile strength, and tensile modulus measured by small laboratory specimens in general. This discussion is limited to single-lap specimens and shear strength only for simplification.

    General Product Information - (Show below) - (Hide below)

    Committee D 14
    Document Type Guide
    Product Note Reconfirmed 2016
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM D 3163 : 2001 : R2014 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
    ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
    ASTM D 2557 : 1998 : R2017 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
    ASTM D 5868 : 2001 : R2014 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
    ASTM D 3165 : 2007 : R2014 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
    ASTM D 5574 : 1994 : R2012 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
    ASTM C 1862 : 2017 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
    ASTM D 5656 : 2010 : R2017 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
    ASTM D 3164 : 2003 : R2017 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
    ASTM D 7616/D7616M : 2011 : R2017 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4027 : 1998 : R2004 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
    ASTM D 3164 : 1997 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
    ASTM D 2295 : 1996 : R2002 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
    ASTM D 3632 : 1998 : R2011 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
    ASTM D 3165 : 2007 : R2023 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
    ASTM D 3166 :1999 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
    ASTM D 1151 : 2000 : R2013 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
    ASTM D 4027 : 1998 : R2019 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
    ASTM D 4027 : 1998 : R2011 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
    ASTM D 1002 : 1999 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
    ASTM D 2294 : 1996 : R2008 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
    ASTM D 3166 : 1999 : R2005 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
    ASTM D 3163 : 2001 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
    ASTM D 1144 : 1999 : R2021 Standard Practice for Determining Strength Development of Adhesive Bonds
    ASTM D 2294 : 1996 : R2016 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
    ASTM D 1780 : 1999 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
    ASTM D 2339 : 1998 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
    ASTM D 3164 : 2003 : R2011 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
    ASTM D 1151 : 2000 : R2022 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
    ASTM D 2295 : 1996 : R2016 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
    ASTM D 2339 : 1998 : R2017 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
    ASTM D 3528 : 1996 : R2002 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
    ASTM D 3163 : 2001 : R2023 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
    ASTM D 1780 : 2005 : R2012 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
    ASTM D 3528 : 1996 : R2016 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
    ASTM D 1002 : 2010 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
    ASTM D 1144 : 1999 : R2011 Standard Practice for Determining Strength Development of Adhesive Bonds
    ASTM D 907 : 2015 Standard Terminology of Adhesives
    ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM D 1183 : 2003 : R2019 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
    ASTM D 1151 : 2000 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
    ASTM D 3632 : 1998 : R2004 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
    ASTM D 3983 : 1998 : R2011 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
    ASTM D 1144 : 1999 : R2016 Standard Practice for Determining Strength Development of Adhesive Bonds
    ASTM D 2919 : 2000 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
    ASTM D 3983 : 1998 : R2019 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
    ASTM D 3434 : 2000 : R2018 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
    ASTM D 3434 : 2000 : R2013 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
    ASTM D 2919 : 2001 : R2023 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
    ASTM D 1002 : 2005 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
    ASTM D 4562 : 2001 : R2013 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
    ASTM D 2295 : 1996 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
    ASTM D 1183 : 1996 : EDT 1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
    ASTM D 2919 : 2001 : R2014 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
    ASTM D 3983 : 1998 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
    ASTM D 2295 : 1996 : R2008 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
    ASTM D 2339 : 1998 : R2004 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
    ASTM D 3166 : 1999 : R2012 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
    ASTM D 907 : 2015 : R2023 Standard Terminology of Adhesives
    ASTM D 3632 : 1998 : R2019 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
    ASTM D 5868 : 2001 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
    ASTM D 1002 : 2010 : R2019 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
    ASTM D 3166 : 1999 : R2020 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
    ASTM D 3164 : 2003 : R2017 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
    ASTM D 3434 : 2000 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
    ASTM D 4562 : 2001 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
    ASTM D 1183 : 2003 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
    ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM D 3164 : 2003 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
    ASTM E 6 : 2023 : REV A Standard Terminology Relating to Methods of Mechanical Testing
    ASTM D 3163 : 2001 : R2008 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
    ASTM D 907 : 2015 : REDLINE Standard Terminology of Adhesives
    ASTM D 5868 : 2001 : R2023 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
    ASTM D 3165 : 2000 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
    ASTM D 5868 : 2001 : R2014 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
    ASTM E 229 : 1997 Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
    ASTM D 1151 : 2000 : R2006 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
    ASTM D 1144 : 1999 : R2005 Standard Practice for Determining Strength Development of Adhesive Bonds
    ASTM D 2294 : 1996 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
    ASTM D 1002 : 2001 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
    ASTM D 5868 : 2001 : R2008 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
    ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
    ASTM D 3528 : 1996 : R2008 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
    ASTM D 2294 : 1996 : R2002 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
    ASTM D 3434 : 2000 : R2006 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
    ASTM D 2919 : 2001 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
    ASTM D 3632 : 1998 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
    ASTM D 1183 : 2003 : R2011 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
    ASTM D 4562 : 2001 : R2019 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
    ASTM D 3983 : 1998 : R2004 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
    ASTM D 1780 : 2005 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
    ASTM D 3165 : 2007 : R2014 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
    ASTM D 4562 : 1990 : R1995 : EDT 1 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
    ASTM E 6 : 2015 : EDT 4 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM D 4562 : 2001 : R2007 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
    ASTM E 6 : 2023 Standard Terminology Relating to Methods of Mechanical Testing
    ASTM D 3163 : 1996 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
    ASTM D 2339 : 1998 : R2011 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
    ASTM D 3528 : 1996 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
    ASTM D 2919 : 2001 : EDT 1 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
    ASTM D 5868 : 1995 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
    ASTM D 4027 : 1998 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
    ASTM D 2919 : 2001 : R2007 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
    ASTM D 3165 : 2007 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
    ASTM D 1144:1999 Standard Practice for Determining Strength Development of Adhesive Bonds
    ASTM D 3163 : 2001 : R2014 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective