ASTM E 177 : 2014 : REDLINE

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods

Available format(s): PDF

Superseded date: 19-02-2020

Language(s): English

Published date: 01-05-2014

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 14.02, 2015 Defines concepts which are necessary for understanding the terms 'precision' and 'bias' as used in quantitative test methods.

Scope - (Show below) - (Hide below)

1.1The purpose of this practice is to present concepts necessary to the understanding of the terms “precision” and “bias” as used in quantitative test methods. This practice also describes methods of expressing precision and bias and, in a final section, gives examples of how statements on precision and bias may be written for ASTM test methods.

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

General Product Information - (Show below) - (Hide below)

Committee	E 11
Development Note	Supersedes ASTM C 1095 (12/2001)
Document Type	Redline
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM E 177 : 2019 : REDLINE

Standards Referenced By This Book - (Show below) - (Hide below)

ASTM D 8040 : 2017	Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
ASTM E 456 : 2013 : REV A : R2017 : EDT 2	Standard Terminology Relating to Quality and Statistics
ASTM D 7577 : 2012	Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
ASTM C 1215 : 1992 : R1997	Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM D 7471 : 2009 : R2014	Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
ASTM D 6641 : 2001	TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE
ASTM D 7476 : 2008 : R2013	Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
ASTM D 7570 : 2017 : REDLINE	Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
ASTM C 670 : 2015 : REDLINE	Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D 5158 : 1998	Standard Test Method for Determination of the Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E 834 : 2009 : R2015	Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
ASTM D 2065 : 2003 : R2017	Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
ASTM C 1123/C1123M : 1990 : R2009 : EDT 1	Standard Test Method for Compressibility and Recovery of Asbestos
ASTM E 1323 : 2015 : REDLINE	Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E 1965 : 1998 : R2009	Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM C 1120 : 1998 : R2002	Standard Test Method for Wash Test of Asbestos
BS ISO 15573:1998	Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV
ASTM D 7488 : 2011 : R2016	Standard Test Method for Open Time of Latex Paints
ASTM C 474 : 2015 : REDLINE	Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
ASTM E 660 : 1990 : R2015	Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM E 456 : 2013	Standard Terminology Relating to Quality and Statistics
ISO 15559:1998	Practice for use of a radiochromic optical waveguide dosimetry system
ASTM B 975 : 2015	Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM C 165 : 2007 : R2017	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C 794 : 2018 : REDLINE	Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM D 1155 : 2010	Standard Test Method for Roundness of Glass Spheres
ASTM D 5768 : 2002 : R2014	Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM D 5158 : 1998 : R2005	Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM G 141 : 2009	Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
ASTM D 4164 : 2013	Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers
ASTM E 1706 : 2005 : EDT 1	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM F 3030 : 2013	Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts
ASTM C 1326 : 2013	Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM D 7637 : 2010 : R2015	Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
DWA-M 143-20:2018	TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
ASTM E 456 : 2013 : REV A	Standard Terminology Relating to Quality and Statistics
ANSI INCITS 322 : 2015	INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
ASTM E 606/E606M : 2012 : REDLINE	Standard Test Method for Strain-Controlled Fatigue Testing
ASTM D 7426 : 2008	Standard Test Method for Assignment of the DSC Procedure for Determining T_g of a Polymer or an Elastomeric Compound
ISO 15573:1998	Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV
ASTM D 1934 : 1995 : R2005	Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM F 576 : 2001	Standard Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry (Withdrawn 2003)
ASTM E 2274 : 2016 : REDLINE	Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
API 10 : 1990	SPECIFICATION FOR MATERIALS AND TESTING FOR WELL CEMENTS
ASTM D 5572 : 1995 : R1999	Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM C 1226 : 1993 : R2002 : EDT 1	Standard Test Method for Soluble Chlorides in Asbestos
ASTM C 1226 : 1993 : R2006	Standard Test Method for Soluble Chlorides in Asbestos (Withdrawn 2007)
ASTM F 3263 : 2017	Standard Guide for Packaging Test Method Validation
ASTM F 1884 : 2004 : R2011	Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM D 3663 : 2003	Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM D 4180 : 2013	Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers
ASTM D 1457 : 1992	Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
API 936 : 2014	REFRACTORY INSTALLATION QUALITY CONTROL - INSPECTION AND TESTING MONOLITHIC REFRACTORY LININGS AND MATERIALS
ASTM D 7521 : 2016 : REDLINE	Standard Test Method for Determination of Asbestos in Soil
BS ISO 15559:1998	Practice for use of a radiochromic optical waveguide dosimetry system
ASTM D 7330 : 2015 : REDLINE	Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM E 266 : 2017 : REDLINE	Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
ASTM C 1123 : 1990 : R1999	Standard Test Method for Compressibility and Recovery of Asbestos
ASTM D 7819 : 2012 : R2016	Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
ASTM E 2677 : 2014	Standard Test Method for Determining Limits of Detection in Explosive Trace Detectors
ASTM E 1834 : 2011	Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
ASTM F 735 : 2017 : REDLINE	Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
ASTM D 6739 : 2011 : R2015	Standard Test Method for Silica—pH Value
ASTM E 1367 : 2003 : R2014	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM D 7234 : 2012 : REDLINE	Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D 2124 : 1999 : R2011	Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique (Withdrawn 2020)
ASTM D 628/D628M : 1995 : R2017	Standard Specification for Asbestos Tubular Sleeving (Withdrawn 2022)
ASTM E 2694 : 2016 : REDLINE	Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids
ASTM D 8007 : 2015	Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
ASTM F 2082 : 2015	Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM D 4735 : 2015 : REDLINE	TEST METHOD FOR DETERMINATION OF TRACE THIOPHENE IN REFINED BENZENE BY GAS CHROMATOGRAPHY
ASTM D 3529 : 2016	Standard Test Methods for Constituent Content of Composite Prepreg
ASTM E 1927 : 1998 : R2018	Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM D 5757 : 2011 : R2017	Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets
ASTM E 1205 : 2009	PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM
ASTM D 1894 : 2014 : REDLINE	Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM D 1065 : 1996 : R2001	Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM E 3047 : 2016	Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry
ASTM C 1121/C1121M : 2004 : R2009 : EDT 1	Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM D 6463 : 1999	Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D 6761 : 2017 : REDLINE	Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
ASTM D 6631 : 2005	Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM D 1585 : 2015 : REDLINE	Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
ASTM E 1617 : 2009	Standard Practice for Reporting Particle Size Characterization Data
ASTM C 1162 : 1990 : R2004 : EDT 1	Standard Test Method for Loose Density of Asbestos
ASTM D 7313 : 2013 : REDLINE	Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
AASHTO R 10 : 2006 : R2011	PRACTICE FOR DEFINITION OF TERMS RELATED TO QUALITY AND STATISTICS AS USED IN HIGHWAY CONSTRUCTION
ASTM D 7637 : 2010	Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
ASTM D 7151 : 2015 : REDLINE	Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 5751 : 1999 : R2005	Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM D 7005/D7005M : 2016 : REDLINE	Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM C 1122 : 1990 : R1999	Standard Test Method for Wet Volume of Asbestos
ASTM F 2385 : 2015 : REDLINE	Standard Practice for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
ASTM F 1520 : 1994 : R2003	Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
ASTM D 3552 : 2017 : REDLINE	Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D 4058 : 1996 : R2001	Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM A 428/A428M : 2010 : R2014	Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM C 1419 : 2014 : REDLINE	Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus
AASHTO T 192 : 2011	METHOD OF TEST FOR FINENESS OF HYDRAULIC CEMENT BY THE 45-[MU]M (NO. 325) SIEVE
ASTM E 132 : 2017 : REDLINE	Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM E 1082 : 1990 : R1995	Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C 469/C469M : 2014 : REDLINE	Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
ASTM D 7855/D7855M : 2013 : R2017	Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM D 3530/D3530M : 1997	Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM F 1802 : 2015 : REDLINE	Standard Test Method for Performance Testing of Excess Flow Valves
ASTM D 7766/D7766M : 2016 : REDLINE	Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM C 393/C393M : 2016 : REDLINE	Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C 739 : 2017 : REDLINE	Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM D 4253 : 2016 : REDLINE	Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D 4284 : 2012 : R2017 : EDT 1	Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM D 5757:2011	Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets
ASTM F 2634 : 2015 : REDLINE	Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D 4781 : 2003	Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM E 1354 : 2017 : REDLINE	Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM G 150 : 2013	Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
ASTM E 2455 : 2006	Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels
ASTM D 5594 : 1998 : R2004	Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM F 2980 : 2013	Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM C 1125 : 1989 : R2009	Standard Test Method for Penetration Index of Asbestos
ASTM C 1291 : 2018 : REDLINE	Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
ASTM E 1574 : 1998 : R2006	Standard Test Method for Measurement of Sound in Residential Spaces
ASTM E 1356 : 2008 : R2014	Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023)
ASTM E 1965 : 1998 : R2016	Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM D 5824 : 1998 : R2017	Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM D 6607 : 2000	Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
ASTM E 2832 : 2012	Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM D 3773/D3773M : 2010 : R2014	Standard Test Methods for Length of Woven Fabric
ASTM F 948 : 1994	Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM D 7466/D7466M : 2010 : R2015 : EDT 1	Standard Test Method for Measuring Asperity Height of Textured Geomembranes
ASTM D 854 : 2014 : REDLINE	Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM E 1651 : 1994 : R2004	Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004)
ASTM D 5154/D5154M : 2018	Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D 7681:2011	Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D 6415/D6415M : 2006 : REV A : EDT 1	Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C 473 : 2017 : REDLINE	Standard Test Methods for Physical Testing of Gypsum Panel Products
ASTM G 73 : 2010	Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM C 596 : 2009 : R2017	Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM D 3249 : 1995 : R2000	Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 3670 : 1991 : R2001	Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM D 7983 : 2017	Standard Test Method for Shrinkage of Carpet Backing Fabrics
ASTM F 1284 : 2009 : R2016	Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM E 572 : 2013 : REDLINE	Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry
ASTM D 4512 : 2003 : R2013 : EDT 1	Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D 5681 : 2017-09	TERMINOLOGY FOR WASTE AND WASTE MANAGEMENT
ASTM D 2589/D2589M : 1988 : R2011 : EDT 1	Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM D 7767 : 2011	Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them
ASTM D 3089 : 1997 : R2008	Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 5827 : 2009 : EDT 1	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM E 3124 : 2017	Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
ASTM D 5280 : 1996 : R2007	Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D 6004 : 2004 : R2011	Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives (Withdrawn 2020)
ASTM D 1996 : 1997 : R2003	Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009)
ASTM D 4460 : 1997 : R2015	Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM C 1735 : 2017 : REDLINE	Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
ASTM F 2826 : 2014	Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
ASTM D 2344/D2344M : 2016 : REDLINE	Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM F 1498 : 2008 : R2012 : EDT 1	Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
ASTM D 2752 : 1988 : R2002	Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM A 977/A977M : 2007 : R2013	Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D 7084 : 2004 : R2009	Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM E 2655 : 2014 : REDLINE	Standard Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
ASTM C 1427 : 2016 : REDLINE	Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
ASTM D 5768 : 2002	Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM F 3004 : 2013 : EDT 1	Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
ASTM D 2809 : 2009 : R2017	Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM E 2161 : 2015 : REDLINE	Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E 660 : 1990 : R2007	Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM D 7245 : 2009 : R2014	Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM C 1120 : 1998	Standard Test Method for Wash Test of Asbestos
ASTM D 5831 : 2017 : REDLINE	Standard Practice for Screening Fuels in Soils
ASTM D 4430 : 2000 : R2015	Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM E 1310 : 2004	PRACTICE FOR USE OF A RADIOCHROMIC OPTICAL WAVEGUIDE DOSIMETRY SYSTEM
ASTM F 2199:2009	Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
ASTM D 6631 : 2005 : R2015	Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM D 7137/D7137M : 2017 : REDLINE	Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D 3594 : 1993 : R2000	Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D 4460 : 1997	Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM F 1632 : 2003 : R2018	Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM F 1326 : 2002	Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM E 1651 : 1994 : R1999	Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
ASTM D 6809 : 2002 : R2016	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 7565/D7565M : 2010 : R2017	Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM C 1109 : 2010	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM G 105 : 2016	Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
ASTM D 4642 : 2004 : R2016	Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D 5379/D5379M : 2012 : REDLINE	Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D 7136/D7136M : 2015 : REDLINE	Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D 6464 : 2003 : REV A : EDT 1	Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1162 : 1990 : R1999	Standard Test Method for Loose Density of Asbestos
ASTM C 394/C394M : 2016 : REDLINE	Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM D 4058 : 1996 : R2006	Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D 4058 : 1996 : R2011 : EDT 1	Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D 6792 : 2017 : REDLINE	Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
ASTM E 1574 : 1998	Standard Test Method for Measurement of Sound in Residential Spaces
ASTM D 5528 : 2013 : REDLINE	Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 2947/D2947M : 1988 : R2011 : EDT 1	Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D 2809 : 2009	Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D 7905/D7905M : 2014	Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 7515 : 2009	Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
ASTM B 795 : 2013 : REDLINE	Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials
ASTM E 1326 : 2015-07	GUIDE FOR EVALUATING NON-CULTURE MICROBIOLOGICAL TESTS
ASTM F 820 : 2017-10	TEST METHOD FOR MEASURING AIR PERFORMANCE CHARACTERISTICS OF CENTRAL VACUUM CLEANING SYSTEMS
ASTM D 7084:2004	Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM D 7708 : 2014 : REDLINE	Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks
ASTM F 1888 : 2009	Test Method for Compression-Displacement of Baseballs and Softballs
ASTM E 2832 : 2012 : R2017	Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM F 1593 : 2008 : R2016	Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer (Withdrawn 2023)
ASTM D 1140 : 2017 : REDLINE	Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 4179 : 2011 : R2017	Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D 2369 : 2010 : EDT 1	Standard Test Method for Volatile Content of Coatings
ASTM C 1519 : 2010	Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D 3364 : 1999	Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM D 4430 : 2000	Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D 7811 : 2013	Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM E 1918 : 2006	Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM C 1259 : 2015 : REDLINE	Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
ASTM F 3136 : 2015	Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
ASTM E 2546 : 2015 : REDLINE	Standard Practice for Instrumented Indentation Testing
ASTM D 5280 : 1996 : R2001	Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM E 3116 : 2018	Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM E 660 : 1990 : R2002	Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM F 380 : 1977 : R1989	Test Method for Effective Fluorescent Lifetime of Neodymium-Doped Laser Materials (Withdrawn 1994)
ASTM D 4796 : 2017 : REDLINE	Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D 2865 : 2001	Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D 4463 : 1996 : R2006	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D 4562 : 2001 : R2013	Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM E 1260 : 2003 : R2009	Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM F 1645/F1645M : 2016 : REDLINE	Standard Test Method for Water Migration in Honeycomb Core Materials
ASTM C 366/C366M : 2016 : REDLINE	Standard Test Methods for Measurement of Thickness of Sandwich Cores
ASTM E 2269 : 2014 : REDLINE	Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
ASTM D 6900 : 2010	Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
ASTM D 7682 : 2017 : REDLINE	Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
ASTM E 2782 : 2017 : REDLINE	Standard Guide for Measurement Systems Analysis (MSA)
ASTM F 1630 : 2000	Standard Test Method for Low Temperature FT-IR Analysis of Single Crystal Silicon for III-V Impurities (Withdrawn 2003)
ASTM D 5467/D5467M : 1997 : R2017	Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D 5824 : 1998 : R2003	Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM C 958 : 1992 : R2014	Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM F 2157 : 2009-02	SPECIFICATION FOR SYNTHETIC SURFACED RUNNING TRACKS
ASTM D 3465 : 2014 : REDLINE	Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
ASTM D 6130 : 2011 : R2018	Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 6150 : 2016 : REDLINE	Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
ASTM C 747 : 2016 : REDLINE	Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
ASTM D 6175 : 2003 : R2008	Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM C 1512 : 2010 : R2015 : EDT 1	Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM D 4621 : 1999	Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke
ASTM D 5594 : 1998	Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D 5403 : 1993 : R1998	Standard Test Methods for Volatile Content of Radiation Curable Materials
ASTM C 198 : 2009 : R2019	Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM C 1121 : 2004	Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM D 7817 : 2012	Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
ASTM D 5357 : 2003 : R2008 : EDT 1	Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ASTM F 1515 : 2015 : REDLINE	Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
ASTM D 7616/D7616M : 2011 : R2017	Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D 1996 : 1997	Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC)
ASTM D 7078/D7078M : 2012 : REDLINE	Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 1977 : 2016 : REDLINE	Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
ASTM D 6607 : 2000 : R2009	Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
ASTM D 3906 : 2003	Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM E 855 : 2008	Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM D 1065 : 1996 : R2006	Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM G 143 : 2003	Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM F 948 : 1994 : R2011	Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow (Withdrawn 2018)
ASTM A 1013 : 2000 : R2005	Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
NFPA 2001 : 2018	CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
BS EN ISO 13500 : 2008	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
ASME PTC22 : 2014	GAS TURBINES
ASTM E 3061 : 2017	Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
ASTM D 3530M : 1997 : R2008 : EDT 1	Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D 6641 : 2001	TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE
ASTM G 51 : 1995 : R2005	Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM C 50/C50M : 2013 : REDLINE	Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
ASTM F 1951 : 2014 : REDLINE	Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
ASTM G 143 : 2003 : R2009	Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM D 3800 : 2016 : REDLINE	Standard Test Method for Density of High-Modulus Fibers
ASTM D 7336/D7336M : 2016 : REDLINE	Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM C 1123/C1123M : 1990 : R2015	Standard Test Method for Compressibility and Recovery of Asbestos (Withdrawn 2021)
ASTM D 3594 : 1993	Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM G 122 : 1996 : R2002	Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM E 2994 : 2016	Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)
ASTM F 2609 : 2011	Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
ASTM C 1120/C1120M : 1998 : R2011 : EDT 1	Standard Test Method for Wash Test of Asbestos
ASTM D 5934 : 2002	Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending (Withdrawn 2009)
ASTM E 1027 : 1992	Practice for Exposure of Polymeric Materials to Ionizing Radiation (Withdrawn 1996)
BS ISO 15571:1998	Practice for dosimetry in a gamma irradiation facility for radiation processing
ASTM D 5572 : 1995 : R2005	Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
AASHTO R 10 : 2006 : R2011	PRACTICE FOR DEFINITION OF TERMS RELATED TO QUALITY AND STATISTICS AS USED IN HIGHWAY CONSTRUCTION
04/30118688 DC : DRAFT AUG 2004	BS ISO ASTM 51707 - GUIDE FOR ESTIMATING UNCERTAINTIES IN DOSIMETRY FOR RADIATION PROCESSING
ASTM F 1520 : 1994 : R1999	Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges
ASTM F 3287 : 2017	Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
ASTM C 1162/C1162M : 1990 : R2009 : EDT 1	Standard Test Method for Loose Density of Asbestos
ASTM D 6195 : 2003 : EDT 1	Standard Test Methods for Loop Tack
ASTM D 7472 : 2009 : R2014	Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM D 6607 : 2000 : R2005	Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
IES RP 27.3:2017	Recommended Practice for Photobiological Safety for Lamps – Risk Group Classification and Labeling
ASTM D 4430 : 2000 : R2010	Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM D 628 : 1995 : R2004 : EDT 1	Standard Specification for Asbestos Tubular Sleeving
ASTM D 3364 : 1999 : R2011	Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM E 2532 : 2009	Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
ASTM E 691 : 2018 : REDLINE	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
04/30109488 DC : DRAFT AUG 2004	BS ISO ASTM 51650 - PRACTICE FOR USE OF CELLULOSE ACETATE DOSIMETRY SYSTEM
ASTM D 8032 : 2016	Standard Test Method for Acid Number of Terephthalic Acid by Color-Indicator Titration
ASTM F 1326 : 2002 : R2006	Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM D 7372 : 2017 : REDLINE	Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM C 596 : 2009	Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM C 1421 : 2018 : REDLINE	Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E 826 : 2014 : REDLINE	Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
07/30148827 DC : 0	BS EN ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
ASTM C 271/C271M : 2016 : REDLINE	Standard Test Method for Density of Sandwich Core Materials
ASTM D 4607 : 2014 : REDLINE	Standard Test Method for Determination of Iodine Number of Activated Carbon
ASTM C 1275 : 2018 : REDLINE	Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM D 6843 : 2010 : R2015	Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
ASTM D 6913 : 2004 : R2009 : EDT 1	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
04/30108676 DC : 0	ISO 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY
ASTM D 4685/D4685M : 2015 : REDLINE	Standard Test Method for Pile Fabric Abrasion
ASTM D 7043 : 2017 : REDLINE	Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
ASTM G 176 : 2003 : R2009	Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM E 2489 : 2016 : REDLINE	Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM B 636/B636M : 2015 : REDLINE	Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM C 1512 : 2010 : R2015	Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM E 839 : 2011	Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM D 4 : 1986 : R2004	Standard Test Method for Bitumen Content
ASTM D 6647 : 2001 : R2006	Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM D 6607 : 2000 : R2015	Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
ASTM D 2238 : 1992 : R2004	Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
ASTM D 3039/D3039M : 2017 : REDLINE	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM C 1226 : 1993 : R1998 : EDT 1	Standard Test Method for Soluble Chlorides in Asbestos
ASTM F 1888 : 2009 : R2016	Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM C 469 : 2002 : EDT 1	Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM E 1367 : 2003 : R2008	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM A 833 : 2017 : REDLINE	Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C 695 : 2015 : REDLINE	Standard Test Method for Compressive Strength of Carbon and Graphite
ASTM C 459 : 1997	Standard Test Methods for Asbestos-Cement Flat Products
ASTM D 5768 : 2002 : R2010	Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM D 8028 : 2017	Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
ASTM C 1121/C1121M : 2004 : R2015	Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021)
ASTM D 3906 : 2003 : R2013	Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM D 7661 : 2010	Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM D 7744/D7744M : 2011	Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
ASTM D 4512 : 2003	Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM D 7883 : 2013	Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography
ASTM F 2476 : 2013 : REDLINE	Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO₂TR) Through Barrier Materials Using An Infrared Detector
ASTM E 2402 : 2011	Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D 4513 : 2011 : R2017	Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D 6576 : 2013 : REDLINE	Standard Specification for Flexible Cellular Rubber Chemically Blown
ASTM D 4782 : 2010	Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D 4562 : 2001	Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM D 8066/D8066M : 2017	Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
ASTM D 4699 : 2003 : R2008	Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM C 596 : 2009 : EDT 1	Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM C 1182 : 2009	Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM D 5449/D5449M : 2016 : REDLINE	Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 6641 : 2001e1	TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE
ASTM E 2931 : 2013	Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
ASTM F 2609 : 2011 : R2015	Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
ASTM D 3670 : 1991 : R1996 : EDT 1	Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM F 108 : 1988 : EDT 1	Test Method for Resistivity of Silicon Epitaxial Layers by the Three-Probe Voltage Breakdown Method (Withdrawn 1993)
ASTM F 3139 : 2015	Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
ASTM B 648 : 2010	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM G 143 : 2003 : R2004	Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM D 4781 : 2003 : R2013	Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM C 1125 : 1989 : R2004	Standard Test Method for Penetration Index of Asbestos
ASTM D 1822 : 2013 : REDLINE	Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D 6175 : 2003 : R2013	Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D 4463 : 1996 : R2001	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM G 51 : 1995 : R2000	Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM D 5768 : 2002 : R2006	Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
NACE SP 05 08 : 2010	METHODS OF VALIDATING EQUIVALENCE TO ISO 8502-9 ON MEASUREMENT OF THE LEVELS OF SOLUBLE SALTS
ASTM D 7504 : 2018 : REDLINE	Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D 1518 : 2014 : REDLINE	Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate
ASTM D 2868 : 2017	Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
AASHTO T 129 : 2014(R2018)	METHOD OF TEST FOR AMOUNT OF WATER REQUIRED FOR NORMAL CONSISTENCY OF HYDRAULIC CEMENT PASTE
ASTM C 1326 : 2013 : R2018	Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM D 3639 : 1992 : R2002 : EDT 2	Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM D 5824 : 1998	Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM E 1875 : 2013 : REDLINE	Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM D 1934 : 1995 : R2000	Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D 4481 : 2010	Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D 7250/D7250M : 2016 : REDLINE	Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D 5280 : 1996 : R2013	Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D 4430 : 2000 : EDT 1	Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM F 2150 : 2013 : REDLINE	Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
ASTM D 7884 : 2013	Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
ASTM D 420 : 2018	Standard Guide for Site Characterization for Engineering Design and Construction Purposes
ASTM G 176 : 2003 : R2017	Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM E 1702 : 2013	PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING
ASTM D 4944 : 2018 : REDLINE	Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM C 1371 : 2015 : REDLINE	Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 2369 : 2010	Standard Test Method for Volatile Content of Coatings
ASTM A 1038 : 2017 : REDLINE	Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM D 3908 : 2003	Standard Test Method for Hydrogen Chemisorption on Supported Platinum on Alumina Catalysts and Catalyst Carriers By Volumetric Vacuum Method
ASTM E 2591 : 2007 : R2013	Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
ASTM D 4562 : 2001 : R2007	Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
ASTM C 364/C364M : 2016 : REDLINE	Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D 7084 : 2004 : R2017	Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers
ASTM E 1868 : 2010 : R2015	Standard Test Methods for Loss-On-Drying by Thermogravimetry
ASTM D 7882 : 2013	Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode
ASTM F 2961 : 2015 : REDLINE	Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM D 5758 : 2001 : R2007 : EDT 1	Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM G 72/G72M : 2015 : REDLINE	Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM D 2862 : 2016 : REDLINE	Standard Test Method for Particle Size Distribution of Granular Activated Carbon
ASTM D 7304 : 2016 : REDLINE	Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC
ASTM D 6862 : 2011 : R2016	Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D 3594 : 1993 : R2006	Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
ASTM D 4463/D4463M : 1996 : R2013 : EDT 1	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D 5649 : 2015 : REDLINE	Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
ASTM E 1260 : 2003	Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM D 4085 : 1993 : R2013	Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D 2124 : 1999 : R2004	Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D 2369 : 2010 : R2015 : EDT 1	Standard Test Method for Volatile Content of Coatings
ASTM D 7736 : 2012 : R2018	Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM F 3078 : 2015	Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
ASTM F 2607 : 2008 : R2014	Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM D 1155 : 2010 : R2015	Standard Test Method for Roundness of Glass Spheres
ASTM D 5403 : 1993 : R2013	Standard Test Methods for Volatile Content of Radiation Curable Materials
ASTM B 769 : 2011 : R2016	Standard Test Method for Shear Testing of Aluminum Alloys
ASTM D 5994/D5994M : 2010 : R2015 : EDT 1	Standard Test Method for Measuring Core Thickness of Textured Geomembranes
ASTM D 4365 : 2013 : REDLINE	TEST METHOD FOR DETERMINING MICROPORE VOLUME AND ZEOLITE AREA OF A CATALYST
ASTM D 2124 : 1999 : EDT 1	Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
ASTM D 6115 : 1997 : R2004	Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 6739 : 2011	Standard Test Method for SilicapH Value
ASTM D 3529/D3529M : 1997 : R2003 : EDT 1	Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM E 1868 : 2010	Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM D 4642 : 2004	Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D 7426 : 2008 : R2013	Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound (Withdrawn 2022)
ASTM D 7476 : 2008	Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
ASTM E 3063 : 2017 : REDLINE	Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
ASTM D 7477 : 2016 : REDLINE	Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
ASTM D 6090 : 2017 : REDLINE	Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
ASTM D 7818 : 2012 : R2016	Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
ASTM E 430 : 2011 : REDLINE	Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
ASTM D 3530 : 1997 : R2015	Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM E 1538 : 2009	PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM
ASTM D 7779 : 2011	Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM C 1234 : 2011 : R2016	Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM D 8069 : 2017	Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
ASTM D 5017 : 2017 : REDLINE	Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
ASTM D 3953 : 2015 : REDLINE	Standard Specification for Strapping, Flat Steel and Seals
ASTM D 5450/D5450M : 2016 : REDLINE	Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 6464 : 2003	Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 6844 : 2010	Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
ASTM D 3529/D3529M : 1997 : R2008	Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM C 1121 : 2004 : EDT 1	Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
ASTM D 3963/D3963M : 2015 : REDLINE	Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
ASTM E 1965 : 1998 : R2003	Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM D 8136 : 2017	Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
ASTM D 6115 : 1997	Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM E 9 : 2009	Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM D 5751 : 1999 : R2012	Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM D 4512 : 2003 : R2013	Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM C 1125 : 1989 : R2004 : EDT 1	Standard Test Method for Penetration Index of Asbestos
ASTM D 7635/D7635M : 2010	Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
ASTM B 887 : 2012	Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
ASTM D 5153 : 2010	Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D 3663 : 2003 : R2015	Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM C 480/C480M : 2016 : REDLINE	Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM E 2480 : 2012 : R2017	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM C 1119 : 1990 : R2004	Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM D 3159 : 2015 : REDLINE	Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
ASTM D 3663 : 2003 : R2008	Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
ASTM E 398 : 2013 : REDLINE	Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
ASTM C 1125 : 1989 : R1999 : EDT 1	Standard Test Method for Penetration Index of Asbestos
ASTM A 428/A428M : 2010	Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM D 3518/D3518M : 2013-09	TEST METHOD FOR IN-PLANE SHEAR RESPONSE OF POLYMER MATRIX COMPOSITE MATERIALS BY TENSILE TEST OF A +/-45 DEGREES LAMINATE
ASTM D 6772/D6772M : 2016 : REDLINE	Standard Test Method for Dimensional Stability of Sandwich Core Materials
ASTM C 550 : 2015 : REDLINE	Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
ASTM D 7639 : 2010	Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 5403 : 1993 : R2002	Standard Test Methods for Volatile Content of Radiation Curable Materials
ASTM E 1617 : 2009 : R2014 : EDT 1	Standard Practice for Reporting Particle Size Characterization Data
ASTM D 7458 : 2014 : REDLINE	Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM C 1124/C1124M : 1990 : R2009 : EDT 1	Standard Test Method for Kerosene Retention of Asbestos
ASTM D 345 : 2002	Side bearings of the freight wagon bogies. General specifications
BS EN ISO 13501:2011	Petroleum and natural gas industries. Drilling fluids. Processing equipment evaluation
I.S. EN ISO 13500:2008	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
I.S. EN ISO 13501:2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION
UNI EN ISO 13501 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING EQUIPMENT EVALUATION
ASTM E 1965 : 1998	Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
ASTM C 1120 : 1998 : R2002 : EDT 1	Standard Test Method for Wash Test of Asbestos
ASTM D 8097 : 2017	Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer
ASTM D 7778 : 2015 : REDLINE	Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM C 1162 : 1990 : R2004	Standard Test Method for Loose Density of Asbestos
ASTM C 1606 : 2010 : R2014	Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
AASHTO T 341 : 2010	METHOD OF TEST FOR DETERMINATION OF COMPRESSION CAPACITY FOR PROFILE WALL PLASTIC PIPE BY STUB COMPRESSION LOADING
ASTM B 647 : 2010	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM F 218 : 2013 : REDLINE	Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM F 2607 : 2008	Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
ASTM D 6883 : 2017 : REDLINE	Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
ASTM D 4254 : 2016 : REDLINE	Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D 8131/D8131M : 2017	Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM F 1593 : 2008	Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer
ASTM E 1401 : 2013	PRACTICE FOR USE OF A DICHROMATE DOSIMETRY SYSTEM
ASTM E 2253 : 2016 : REDLINE	Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
API 13A : 2010	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM B 769 : 2011	Standard Test Method for Shear Testing of Aluminum Alloys
ASTM E 1706 : 2005 : R2010	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates (Withdrawn 2019)
ASTM D 8115 : 2017	Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader)
ASTM E 2402 : 2011 : R2017	Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D 6645 : 2001	Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D 5029 : 1998 : R2014	Standard Test Method for Water Solubles in Activated Carbon
ASTM E 2540 : 2016 : REDLINE	Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM G 176 : 2003	Standard Test Method for Ranking Resistance of Plastics to Sliding Wear using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM E 1710 : 2018 : REDLINE	Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E 2759 : 2010	Standard Practice for Highway Traffic Monitoring Truth-in-Data
ASTM D 2947 : 1988 : R2006	Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM D 6264/D6264M : 2017 : REDLINE	Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM C 1119/C1119M : 1990 : R2009 : EDT 1	Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM U 09 : 2013	Precision Statements in UOP Methods
ASTM D 465 : 2015 : REDLINE	Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
ASTM D 1065 : 1996 : R2014 : EDT 1	Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM G 132 : 1996	Standard Test Method for Pin Abrasion Testing
ASTM D 5228 : 2016 : REDLINE	Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
ASTM G 174 : 2004 : R2017	Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM D 7811 : 2013 : R2017	Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM D 4533/D4533M : 2015 : REDLINE	Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM F 978 : 2002	Standard Test Method for Characterizing Semiconductor Deep Levels by Transient Capacitance Techniques (Withdrawn 2003)
04/19987313 DC : DRAFT DEC 2004	BS ISO 13501 - PETROLEUM & NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION
ASTM E 517 : 2018 : REDLINE	Standard Test Method for Plastic Strain Ratio r for Sheet Metal
ASTM E 180 : 2003	Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009)
ASTM D 7819 : 2012	Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
ASTM D 2065 : 2003	Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
ASTM D 6913/D6913M : 2017 : REDLINE	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
04/30096886 DC : DRAFT JUL 2004	ISO 13503-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 3: TESTING OF HEAVY BRINES
ASTM D 4512 : 2003 : R2008	Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
ASTM C 459 : 1997 : R2002	Standard Test Methods for Asbestos-Cement Flat Products
ASTM G 181 : 2011	Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
AASHTO T 192 : 2011(R2015)	METHOD OF TEST FOR FINENESS OF HYDRAULIC CEMENT BY THE 45-[MU]M (NO. 325) SIEVE
ASTM D 3307 : 2016 : REDLINE	Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
ASTM D 4460 : 1997 : R2004	Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM D 6195 : 2003 : R2011	Standard Test Methods for Loop Tack
ASTM C 549 : 2006	Standard Specification for Perlite Loose Fill Insulation
BS ISO 15561:1998	Practice for use of a dichromate dosimetry system
ASTM D 3529/D3529M : 1997	Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
ASTM F 1326 : 2002 : R2016	Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM F 387 : 2017 : REDLINE	Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
ASTM D 4 : 1986 : R1998	Standard Test Method for Bitumen Content
ASTM D 4 : 1986 : R2010	Standard Test Method for Bitumen Content
ASTM D 7553 : 2015 : REDLINE	Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
ASTM C 165 : 2007	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C 1122/C1122M : 1990 : R2009 : EDT 1	Standard Test Method for Wet Volume of Asbestos
ASTM D 4222 : 2003	Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts By Static Volumetric Measurements
ASTM C 958 : 1992 : R1997 : EDT 1	Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
SAE J 2334 : 2016	LABORATORY CYCLIC CORROSION TEST
ASTM C 1120 : 1998 : R2006	Standard Test Method for Wash Test of Asbestos
ASTM D 2867 : 2017 : REDLINE	Standard Test Methods for Moisture in Activated Carbon
ASTM D 5504 : 2012 : REDLINE	Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
ASTM E 1926 : 2008	Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM C 613M : 1997 : R2008 : EDT 1	Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
ASTM C 1122 : 1990 : R2004	Standard Test Method for Wet Volume of Asbestos
ASTM F 121 : 1983 : EDT 1	Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1989)
ASTM D 5467/D5467M : 1997 : R2004	Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D 7248/D7248M : 2012 : R2017	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM F 1404 : 1992 : R1999	Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique
ASTM F 2944 : 2012	Standard Test Method for Automated Colony Forming Unit (CFU) Assays—Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture
ASTM D 4430 : 2000 : R2006	Standard Practice for Determining the Operational Comparability of Meteorological Measurements
ASTM F 2199 : 2009 : R2014	Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
ASTM E 1608 : 2015	Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
ASTM D 6741 : 2010	Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM E 1707 : 2015	GUIDE FOR ESTIMATING UNCERTAINITIES IN DOSIMETRY FOR RADIATION PROCESSING
ASTM D 5930 : 2017 : REDLINE	Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
API RP 13J : 2014	TESTING OF HEAVY BRINES
ASTM D 628 : 1995 : R1999	Standard Specification for Asbestos Tubular Sleeving
ASTM D 3124 : 1998 : R2003	Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM F 2082/F2082M : 2016 : REDLINE	Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
ASTM D 7855/D7855M : 2013	Standard Test Method for Determination of Mold Growth on Coated Building Products Designed for Interior Applications Using an Environmental Chamber and Indirect Inoculation
ASTM D 5827 : 2009	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM E 2116 : 2013	PRACTICE FOR DOSIMETRY FOR A SELF-CONTAINED DRY-STORAGE GAMMA-RAY IRRADIATOR
ASTM C 1123 : 1990 : R2004	Standard Test Method for Compressibility and Recovery of Asbestos
ASTM E 1060 : 1985	PRACTICE FOR INTERLABORATORY TESTING OF SPECTROCHEMICAL METHODS OF ANALYSIS
ASTM C 1215 : 1992 : R2012 : EDT 1	Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM E 2916 : 2013	Standard Terminology for Digital and Multimedia Evidence Examination
ASTM F 1940 : 2007	Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM G 204 : 2015 : REDLINE	Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM E 456 : 2013 : REV A : EDT 1	Standard Terminology Relating to Quality and Statistics
ASTM D 3124 : 1998	Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 2238 : 1992 : R2012 : EDT 1	Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm⁻¹ (Withdrawn 2021)
API 13A : 2010 : INC : ERR 1 : 2014	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM D 5751 : 1999	Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
ASTM E 2714 : 2013 : REDLINE	Standard Test Method for Creep-Fatigue Testing
SAE J 1085 : 2017	TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS
ASTM D 7471 : 2009	Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
ASTM D 5755 : 2009	Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
ASTM D 6742/D6742M : 2017 : REDLINE	Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ASTM C 1819 : 2015	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM E 1818 : 2013	PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 80 AND 300 KEV
ISO 15560:1998	Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
ASTM D 628/D628M : 1995 : R2009 : EDT 1	Standard Specification for Asbestos Tubular Sleeving
ASTM G 141 : 2009 : R2013	Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
ASTM E 3151 : 2018	Standard Test Method for Determining Antimicrobial Activity and Biofilm Resistance Properties of Tube, Yarn, or Fiber Specimens
ASTM D 8171 : 2018	Standard Test Methods for Density Determination of Flax Fiber
ASTM D 7332/D7332M : 2016 : REDLINE	Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM F 2156 : 2017 : REDLINE	Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
ASTM F 2617 : 2015 : REDLINE	Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
ASTM D 5357 : 2003	Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-Ray Diffraction
ASTM D 6004 : 2004	Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives
ASTM D 4642 : 2004 : R2010	Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
ASTM D 6525/D6525M : 2018 : REDLINE	Standard Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D 3389 : 2016 : REDLINE	Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
ASTM D 7283 : 2017 : REDLINE	Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
ASTM C 1114 : 2006	Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM D 5178 : 2016 : REDLINE	Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 5768 : 2002 : R2018	Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
ASTM F 2095 : 2007 : R2013	Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
ASTM C 1274 : 2012 : REDLINE	Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
ASTM F 2330 : 2004	Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water (Withdrawn 2010)
ASTM F 1326 : 2002 : R2011	Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM F 948 : 1994 : R2001	Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM D 7488 : 2011	Standard Test Method for Open Time of Latex Paints
ASTM F 3287 : 2017 : EDT 1	Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
ASTM E 262 : 2017 : REDLINE	Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
ASTM D 4222 : 2003 : R2015 : EDT 1	Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D 8020 : 2015	Standard Test Method for Freeze-Thaw Viscosity Stability of Water-Based Inks and Ink Vehicles
ASTM D 3936 : 2017 : REDLINE	Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
ASTM F 2828 : 2012	Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
ASTM F 1632 : 2003	Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 4085 : 1993 : R1997	Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM D 6817/D6817M : 2017 : REDLINE	Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM G 122 : 1996 : R2015 : EDT 1	Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM G 73 : 2010 : R2017	Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM D 1316 : 2006 : R2011	Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer (Withdrawn 2020)
ASTM D 7202 : 2015 : REDLINE	Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D 3249 : 1995 : R2005	Standard Practice for General Ambient Air Analyzer Procedures
ASTM F 1888 : 2009 : R2014	Standard Test Method for Compression-Displacement of Baseballs and Softballs
ASTM D 2752 : 1988 : R2006	Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM F 1940 : 2007 : REV A	Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM D 4621 : 1999 : R2004	Standard Guide for Quality Management in an Organization That Samples or Tests Coal and Coke (Withdrawn 2010)
ASTM B 886 : 2012	Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides
ASTM D 6281 : 2015 : REDLINE	Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
ASTM E 1489 : 2008	Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
ASTM E 1956 : 2013	PRACTICE FOR USE OF THERMOLUMINESCENCE-DOSIMETRY (TLD) SYSTEMS FOR RADIATION PROCESSING
ASTM A 1013 : 2000	Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
ASTM F 3067 : 2014	Guide for Radial Loading of Balloon Expandable and Self Expanding Vascular Stents
ASTM D 4797 : 2017 : REDLINE	Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking
ASTM E 1772 : 1995 : R2001	Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique (Withdrawn 2010)
ASTM D 3908 : 2003 : R2015	Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
ASTM D 7984 : 2016	Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM D 4567 : 2003 : R2008	Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM F 3079 : 2014	Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities
ASTM D 5730 : 2004	Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater (Withdrawn 2013)
ASTM D 7736 : 2012	Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 6815 : 2009 : R2015	Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
ASTM D 4780 : 2012 : R2017 : EDT 1	Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D 7264/D7264M : 2015 : REDLINE	Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
ASTM D 3492 : 2016 : REDLINE	Standard Specification for Rubber Contraceptives (Male Condoms)
ASTM D 6913 : 2004 : R2009	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 2589 : 1988 : R2006 : EDT 1	Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM D 6913 : 2004 : EDT 2	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM E 481 : 2016 : REDLINE	Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
ASTM D 6133 : 2002 : R2014	Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 4417 : 2014 : REDLINE	Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D 7028 : 2007 : EDT 1	Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D 7661 : 2010 : R2017	Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms
ASTM D 3639 : 1992 : R2002	Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM D 6464 : 2003 : REV A : R2017	Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1119 : 1990 : R1995	Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM F 2095 : 2007	Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
ASTM C 363/C363M : 2016 : REDLINE	Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM C 1122 : 1990 : R2004 : EDT 1	Standard Test Method for Wet Volume of Asbestos
ASTM D 7515 : 2009 : R2014	Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
ASTM C 1226 : 1993 : R2002	Standard Test Method for Soluble Chlorides in Asbestos
ASTM D 3773/D3773M : 2010	Standard Test Methods for Length of Woven Fabric
ASTM E 1876 : 2015 : REDLINE	Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM D 4567 : 2003	Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM D 7291/D7291M : 2015 : REDLINE	Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM E 2653 : 2015 : REDLINE	Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM F 2883 : 2011	Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020)
ASTM D 3364 : 1999 : R2004	Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
ASTM F 2569 : 2011 : REDLINE	Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM F 2824 : 2010 : EDT 1	Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM D 8063 : 2018	Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
ASTM D 8031 : 2016	Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
ASTM D 4464 : 2015 : REDLINE	Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering
ASTM F 1520 : 1994 : R2008	Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges (Withdrawn 2015)
ISO 15571:1998	Practice for dosimetry in a gamma irradiation facility for radiation processing
ASTM D 7027 : 2013 : REDLINE	Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM G 132 : 1996 : R2007	Standard Test Method for Pin Abrasion Testing
BS EN ISO 13503-3:2005	Petroleum and natural gas industries. Completion fluids and materials Testing of heavy brines
ASTM D 7577 : 2012 : R2016	Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends
UNI EN ISO 13500 : 2011	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
UNI EN ISO 13503-3 : 2006	PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 3: TESTING OF HEAVY BRINES
ASTM C 1122/C1122M : 1990 : R2015	Standard Test Method for Wet Volume of Asbestos (Withdrawn 2021)
ASTM D 6248 : 1998 : R2004	Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ISO 15561:1998	Practice for use of a dichromate dosimetry system
ASTM E 1431 : 2005	PRACTICE FOR DOSIMETRY IN ELECTRON AND BREMSSTRAHLUNG IRRADIATION FACILITIES FOR FOOD PROCESSING
ASTM D 6181 : 2003	Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin (Withdrawn 2012)
AASHTO T 44 : 2014	METHOD OF TEST FOR SOLUBILITY OF BITUMINOUS MATERIALS
ASTM D 2065 : 2003 : R2011	: Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
ASTM F 948 : 1994 : R2001 : EDT 1	Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM D 2197 : 2016 : REDLINE	Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM C 586 : 2011 : REDLINE	TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD)
ASTM E 1367 : 2003	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM F 1632 : 2003 : R2010	Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM D 3670 : 1991 : R2007	Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM G 109 : 2007 : R2013	Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
CSA A23.1 A23.2 : 2014	CONCRETE MATERIALS AND METHODS OF CONCRETE CONSTRUCTION/TEST METHODS AND STANDARD PRACTICES FOR CONCRETE
ASTM D 4463 : 1996	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
API 13J SPANISH : 1996	PRUEBAS CON SALMUERAS PESADAS
ASTM D 628 : 1995 : R2004	Standard Specification for Asbestos Tubular Sleeving
ASTM D 2947 : 1988 : R2002	Standard Test Method for Screen Analysis of Asbestos Fibers
ASTM E 2171 : 2002 : R2008	Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
ASTM D 7956/D7956M : 2016 : REDLINE	Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
ISO 15565:1998	Practice for use of a radiochromic liquid dosimetry system
ASTM C 557 : 2003 : R2009 : EDT 1	Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 5357 : 2003 : R2013	Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
ISO 15572:1998	Guide for estimating uncertainties in dosimetry for radiation processing
ASTM E 456 : 2013 : REV A : EDT 4	Standard Terminology Relating to Quality and Statistics
BS ISO 15572:1998	Guide for estimating uncertainties in dosimetry for radiation processing
ASTM D 8130 : 2017	Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
ASTM D 6248 : 1998	Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
BS ISO 15560:1998	Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory
ASTM C 1327 : 2015 : REDLINE	TEST METHOD FOR VICKERS INDENTATION HARDNESS OF ADVANCED CERAMICS
ASTM E 595 : 2015 : REDLINE	Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM F 386 : 2017 : REDLINE	Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
ASTM G 122 : 1996	Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
AASHTO R 44 : 2007 : R2012	PRACTICE FOR INDEPENDENT ASSURANCE (IA) PROGRAMS
ASTM E 1680 : 2016 : REDLINE	Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems
ASTM F 3004 : 2013	Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
ASTM E 1927 : 1998 : R2012	Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM F 1884 : 2004	Standard Test Method for Determining Residual Solvents in Packaging Materials
ASTM B 648 : 2010 : R2015 : EDT 1	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM D 6463/D6463M : 2006 : R2012	Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
BS ISO 15565:1998	Practice for use of a radiochromic liquid dosimetry system
ASTM E 2406 : 2016 : REDLINE	Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
ASTM D 4821 : 2016 : REDLINE	Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
ASTM D 6133:2002	Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 2854 : 2009	Standard Test Method for Apparent Density of Activated Carbon
ASTM D 1065 : 1996	Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM F 948 : 1994 : R2006	Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM D 5029 : 1998 : R2009	Standard Test Method for Water Solubles in Activated Carbon
ASTM D 545 : 2014 : REDLINE	Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
ASTM E 1082 : 1990 : R2012	Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 6130 : 2011	Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 4781 : 2003 : R2008	Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
ASTM C 1123 : 1990 : R2004 : EDT 1	Standard Test Method for Compressibility and Recovery of Asbestos
ASTM E 1900 : 2009	GUIDE FOR DOSIMETRY IN RADIATION RESEARCH ON FOOD AND AGRICULTURAL PRODUCTS
ASTM F 1514 : 2003	Standard Test Method for Measuring Heat Stability of Resilient Vinyl Flooring by Color Change
ASTM D 3171 : 2015 : REDLINE	Standard Test Methods for Constituent Content of Composite Materials
ASTM E 2792 : 2013 : REDLINE	Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
ASTM D 2238 : 1992 : R1999	Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm
ASTM D 4460 : 1997 : R2009	Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM D 3908 : 2003 : R2008	Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method
04/30124757 DC : DRAFT NOV 2004	ISO 13500 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
ASTM F 1498 : 2008	Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
ASTM D 6463/D6463M : 2006	Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
ASTM D 5758 : 2001 : R2015	Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM E 1918 : 2006 : R2015	Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM D 6818 : 2018-02	TEST METHOD FOR ULTIMATE TENSILE PROPERTIES OF ROLLED EROSION CONTROL PRODUCTS
ASTM D 8067/D8067M : 2017	Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
ASTM D 7964/D7964M : 2014	Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
ASTM D 7967 : 2016	Standard Test Method for Analysis of Chrome Content (as Cr2O3) in Wet Blue using Atomic Absorption
ASTM G 156 : 2017 : REDLINE	Standard Practice for Selecting and Characterizing Weathering Reference Materials
ASTM B 797 : 2015 : REDLINE	Standard Test Method for Surface Finger-Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (PF) Steel Parts
ASTM E 2141 : 2014 : REDLINE	Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
ASTM D 6913 : 2004 : EDT 1	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 7616/D7616M : 2011	Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D 7360 : 2016 : REDLINE	Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
ASTM F 1404 : 1992 : R2007	Test Method for Crystallographic Perfection of Gallium Arsenide by Molten Potassium Hydroxide (KOH) Etch Technique (Withdrawn 2016)
BS ISO 13501 : 2005 AMD 16886	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION
ASTM D 7816 : 2012 : R2016	Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
10/30219716 DC : 0	BS EN ISO 13501 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUIDS - PROCESSING SYSTEMS EVALUATION
ASTM D 6469 : 2017 : REDLINE	Standard Guide for Microbial Contamination in Fuels and Fuel Systems
ASTM E 1367 : 2003 : EDT 1	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Estuarine and Marine Invertebrates
ASTM F 729 : 1981 : R1990 : EDT 1	Test Methods for Temperature Coefficient of Resistance of Film Resistors (Withdrawn 1992)
ASTM D 7469 : 2016 : REDLINE	Standard Test Methods for End-Joints in Structural Wood Products
ASTM D 698 : 2013-05	TEST METHODS FOR LABORATORY COMPACTION CHARACTERISTICS OF SOIL USING STANDARD EFFORT (12400 FT-LBF/FT[3] (600 KN-M/M[3]))
ASTM E 1356 : 2008	Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D 5448/D5448M : 2016 : REDLINE	Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM C 1763 : 2016 : REDLINE	Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM E 1082 : 1990 : R2017	Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 5467/D5467M : 1997 : R2010	Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D 3420 : 2014 : REDLINE	Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D 3639 : 1992 : R2006 : EDT 1	Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM D 1065 : 1996 : R2010	Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
ASTM D 1353 : 2013 : REDLINE	Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM C 1119 : 1990 : R1999	Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASTM D 1749 : 1993 : R2002	Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ASTM D 2777 : 2013 : REDLINE	Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM E 2171 : 2002	Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record
ASTM E 2627 : 2013 : REDLINE	Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
ASTM G 77 : 2017 : REDLINE	Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM D 8176 : 2018	Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
ASTM D 7591 : 2012	Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 7818:2012	Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
ASTM F 2544 : 2011 : R2018	Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM C 459 : 1997 : R2006	Standard Test Methods for Asbestos-Cement Flat Products
ASTM D 5594 : 1998 : R2012	Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
ASTM D 6132 : 2013	Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D 3906 : 2003 : R2008	Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
ASTM F 426 : 1981 : R1990	Practice for Evaluating and Classifying Methods for the Analysis of Fat in Meat and Meat Products (Withdrawn 1995)
ASTM G 181 : 2011 : R2017	Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM D 6484/D6484M : 2014 : REDLINE	Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM C 430 : 2017 : REDLINE	Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM D 6647 : 2001 : R2011	Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
API 13A : 2010 : INC : ERR 3 : 2015	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM D 8007 : 2015 : EDT 1	Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
ASTM D 7423 : 2017 : REDLINE	Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
ASTM G 174 : 2004 : R2009 : EDT 1	Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
AASHTO T 213M/T 213 : 1900	METHOD OF TEST FOR MASS [WEIGHT] OF COATING ON ALUMINUM-COATED IRON OR STEEL ARTICLES
ASTM E 1450 : 2016 : REDLINE	Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM C 365/C365M : 2016 : REDLINE	Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
ASTM D 1749 : 1993 : R2007	Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products (Withdrawn 2010)
ASTM C 1285 : 2014 : REDLINE	Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT)
ASTM C 1109 : 2010 : R2015	Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM G 174 : 2004	Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM C 557 : 2003 : EDT 1	Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM E 1782 : 2014 : REDLINE	Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM C 1519 : 2010 : R2017	Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM C 297/C297M : 2016 : REDLINE	Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
ASTM G 132 : 1996 : R2013	Standard Test Method for Pin Abrasion Testing
ASTM D 2166/D2166M : 2016 : REDLINE	Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D 3124 : 1998 : R2011	Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 4060 : 2014 : REDLINE	Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 5755 : 2009 : R2014 : EDT 1	Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023)
ASTM D 7127 : 2017 : REDLINE	Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM G 51 : 1995 : R2012	Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM D 7028 : 2007	Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D 7245 : 2009	Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM C 198 : 2009	Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM F 2980 : 2013 : R2017	Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)
ASTM E 1574 : 1998 : R2014	Standard Test Method for Measurement of Sound in Residential Spaces
ASTM D 6115 : 1997 : R2011	Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 5280 : 1996	Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
ASTM D 6475 : 2017	Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM C 165 : 2007 : R2012	Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM D 6809 : 2002 : R2007	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM E 92 : 2017 : REDLINE	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
ASTM D 4780 : 2012	Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption
ASTM D 5827 : 2009 : R2015	Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4481 : 2010 : R2015	Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM G 109 : 2007	Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM D 7615/D7615M : 2011	Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM G 98 : 2017 : REDLINE	Standard Test Method for Galling Resistance of Materials
ASTM D 6645 : 2001 : R2010	Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D 2589 : 1988 : R2002 : EDT 1	Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber
ASTM C 557 : 2003	Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1111:2010	Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 7768 : 2012	Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
ASTM D 2589 : 1988 : R2002	Standard Test Method for McNett Wet Classification of Duel Asbestos Fiber
ASTM E 2480 : 2012	Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM D 3249 : 1995 : R2011	Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 6132 : 2013 : R2017	Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM D 5742 : 2016 : REDLINE	Standard Test Method for Determination of Butane Activity of Activated Carbon
ASTM D 5795 : 2016 : REDLINE	Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus
ASTM D 6464 : 2003 : REV A	Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM C 1674 : 2016 : REDLINE	Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
ASTM E 2760 : 2016 : REDLINE	Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 1927 : 1998	Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM E 1927 : 1998 : R2003	Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM D 4058 : 1996 : R2015	Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D 1683/D1683M : 2017-04	TEST METHOD FOR FAILURE IN SEWN SEAMS OF WOVEN FABRICS
ASTM D 6631 : 2005 : R2011	Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
ASTM D 6740 : 2015 : REDLINE	Standard Test Method for Silanes Used in Rubber Formulations(bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
ASTM D 7816 : 2012	Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
ASTM D 8019 : 2015	Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets
ASTM E 1927 : 1998 : R2007	Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM D 1316 : 2006	Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
ASTM C 802 : 2014 : REDLINE	Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C 1512 : 2010	Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM D 7937 : 2015	Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
ASTM D 4567 : 2003 : R2013	Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
ASTM E 2490:2009	Standard Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
ASTM C 1667 : 2015 : REDLINE	Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM D 3103 : 2014 : REDLINE	Standard Test Method for Thermal Insulation Performance of Distribution Packages
ASTM D 6175 : 2003	Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM C 1125 : 1989 : R2015	Standard Test Method for Penetration Index of Asbestos (Withdrawn 2021)
ASTM F 1514 : 2003 : R2013	Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM E 1926 : 2008 : R2015	Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM F 1940 : 2007 : REV A : R2014	Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
ASTM C 1111 : 2010 : R2015	Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM E 2798 : 2011	Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
ASTM D 4699 : 2003 : R2013	Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles
ASTM D 5153 : 2010 : R2016	Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption
ASTM D 8089 : 2017	Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
ASTM A 977/A977M : 2007	Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
GOST 849:2018	Primary nickel. SpecificationsE
EN ISO 13500:2008/A1:2010	PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING FLUID MATERIALS - SPECIFICATIONS AND TESTS
ISO 13503-3:2005	Petroleum and natural gas industries Completion fluids and materials Part 3: Testing of heavy brines
ISO 13501:2011	Petroleum and natural gas industries Drilling fluids Processing equipment evaluation
EN ISO 13501:2011	Petroleum and natural gas industries - Drilling fluids - Processing equipment evaluation (ISO 13501:2011)
EN ISO 13503-3:2005/AC:2007	PETROLEUM AND NATURAL GAS INDUSTRIES - COMPLETION FLUIDS AND MATERIALS - PART 3: TESTING OF HEAVY BRINES
ASTM D 6913 : 2004	Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 7309 : 2013 : REDLINE	TEST METHOD FOR DETERMINING FLAMMABILITY CHARACTERISTICS OF PLASTICS AND OTHER SOLID MATERIALS USING MICROSCALE COMBUSTION CALORIMETRY
ASTM D 6242 : 1998 : R2004	Standard Test Method for Mass Unit Area of Nonwoven Fabrics (Withdrawn 2008)
ASTM G 211 : 2014	Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM D 3039/D3039M : 2000	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
ASTM E 1706 : 2005	Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
ASTM D 6575/D6575M : 2016 : REDLINE	Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
ASTM C 1215 : 1992 : R2006	Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM E 1082 : 1990 : R2002	Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
API 13C REDLINE : 2010	RECOMMENDED PRACTICE ON DRILLING FLUIDS PROCESSING SYSTEMS EVALUATION
ASTM E 2330 : 2012 : REDLINE	Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM G 83 : 1996	Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005)
ASTM D 5029 : 1998 : R2004	Standard Test Method for Water Solubles in Activated Carbon
ASTM F 2824 : 2010	Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM E 456 : 2013 : REV A : EDT 2	Standard Terminology Relating to Quality and Statistics
ASTM D 7248/D7248M : 2012	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM E 2591 : 2007	Standard Guide for Conducting Whole Sediment Toxicity Tests with Amphibians
ASTM D 1749 : 1993 : R1997	Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ASTM D 4284 : 2012	Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
ASTM E 456 : 2013 : REV A : EDT 3	Standard Terminology Relating to Quality and Statistics
ASTM E 660 : 1990 : R1996	Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
API 13A : 2010 : INC : ERR 4 : 2016 : R201500	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM E 2927 : 2017-04	TEST METHOD FOR DETERMINATION OF TRACE ELEMENTS IN SODA-LIME GLASS SAMPLES USING LASER ABLATION INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY FOR FORENSIC COMPARISONS
ASTM D 1425/D1425M : 2014 : REDLINE	Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM F 95 : 1989 : R2000	Standard Test Method for Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Silicon Substrates Using an Infrared Dispersive Spectrophotometer (Withdrawn 2003)
ASTM E 1082 : 1990 : R2007	Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM D 7472 : 2009	Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM F 2797 : 2010	Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners (Withdrawn 2019)
ASTM F 3299 : 2018	Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor)
ASTM E 970 : 2017 : REDLINE	Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM F 122 : 1974 : R1985	Test Method for Interstitial Atomic Oxygen Content of Silicon by Infrared Absorption (Withdrawn 1990)
ASTM F 1249 : 2013 : REDLINE	Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM C 187 : 2016 : REDLINE	Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM E 1940 : 2013	Standard Guide for Dosimetry for Sterile Insect Release Programs
ASTM D 1603 : 2014 : REDLINE	Standard Test Method for Carbon Black Content in Olefin Plastics
ASTM D 5824 : 1998 : R2011	Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
ASTM G 122 : 1996 : R2008	Standard Test Method for Evaluating the Effectiveness of Cleaning Agents
ASTM D 7735 : 2017 : REDLINE	Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
ASTM E 2649 : 2012	Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
ASTM C 459 : 1997 : R2002 : EDT 1	Standard Test Methods for Asbestos-Cement Flat Products
ASTM E 643 : 2015 : REDLINE	Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
ASTM D 4179 : 2011	Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers
ASTM D 5029 :1998	Standard Test Method for Water Solubles in Activated Carbon
ASTM F 2845 : 2014 : REDLINE	Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
ASTM B 527 : 2015 : REDLINE	Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM E 3031 : 2015	Standard Test Method for Determination of Antibacterial Activity on Ceramic Surfaces
ASTM C 958 : 1992 : R2007	Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM F 3300 : 2018	Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
ASTM D 2752/D2752M : 1988 : R2011 : EDT 1	Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM E 96/E96M : 2016 : REDLINE	Standard Test Methods for Water Vapor Transmission of Materials
ASTM C 749 : 2015 : REDLINE	Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D 6493 : 2011	Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM C 209 : 2015 : REDLINE	Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM C 1174 : 2017 : REDLINE	Standard Practice for Evaluation of the Long-Term Behavior of Materials Used in Engineered Barrier Systems (EBS) for Geological Disposal of High-Level Radioactive Waste
ASTM E 1939 : 2005	PRACTICE FOR BLOOD IRRADIATION DOSIMETRY
ASTM D 6242 : 1998	Standard Test Method for Mass Unit Area of Nonwoven Fabrics
ASTM D 5758 : 2001	Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM E 456 : 2013 : REV A : R2017 : EDT 1	Standard Terminology Relating to Quality and Statistics
API 13A REDLINE : 2010	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM B 647 : 2010 : R2016	Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D 6843 : 2010	Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
ASTM D 3530/D3530M : 1997 : R2008	Standard Test Method for Volatiles Content of Composite Material Prepreg
ASTM D 4058 :1996	Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
ASTM D 7565/D7565M : 2010	Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM C 459/C459M : 1997 : R2011 : EDT 1	Standard Test Methods for Asbestos-Cement Flat Products
ASTM D 6656 : 2016 : REDLINE	Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
ASTM B 703 : 2017	Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter
ASTM C 1446 : 2011 : REDLINE	Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM C 1785 : 2017 : REDLINE	Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM D 4699 : 2003	Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Particles
ASTM E 3064 : 2016	Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose
ASTM D 2947 : 1988 : R2002 : EDT 1	Standard Test Method for Screen Analysis of Asbestos Fibers
B184 SERIES-17	Polymeric subsurface stormwater management structures
ASTM E 2587 : 2016 : REDLINE	Standard Practice for Use of Control Charts in Statistical Process Control
ASTM F 2824 : 2010 : R2015	Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
ASTM D 8054/D8054M : 2016	Standard Test Methods for Tensile Testing of Para-Aramid Flat Yarns
ASTM E 1772 : 1995	Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E 855 : 2008 : R2013	Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
ASTM E 1601 : 2012 : REDLINE	Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM D 3639/D3639M : 1992 : R2011 : EDT 1	Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM C 469 : 2002	Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM D 3273 : 2016 : REDLINE	Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D 3594 : 1993 : R2013	Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers (Withdrawn 2019)
ASTM D 7681 : 2011 : R2016	Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D 6566 : 2018 : REDLINE	Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM C 1606 : 2010	Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
API 13A : 2010 : INC : ERR 4 : 2016	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM D 4460 : 1997 : R2005	Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
ASTM E 2008 : 2017 : REDLINE	Standard Test Methods for Volatility Rate by Thermogravimetry
ASTM D 4513 : 2011	Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving
ASTM D 4509 : 1996	Standard Test Methods for Determining the 24-Hour Gas (AIR) Space Acetaldehyde Content of Freshly Blown PET Bottles (Withdrawn 2005)
ASTM D 5572 : 1995 : R2012	Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
ASTM E 1970 : 2016 : REDLINE	Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM D 8132/D8132M : 2017	Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
API 13A : 2010 : INC : ERR 2 : 2015	SPECIFICATION FOR DRILLING FLUIDS MATERIALS
ASTM D 6815 : 2009	Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
API RP 13C : 2014	RECOMMENDED PRACTICE ON DRILLING FLUID PROCESSING SYSTEMS EVALUATION
CSA A3000 : 2013	CEMENTITIOUS MATERIALS COMPENDIUM
ASTM D 6790/D6790M : 2016 : REDLINE	Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
ASTM G 143 : 2003 : R2013	Standard Test Method for Measurement of Web/Roller Friction Characteristics
ASTM C 198 : 2009 : R2013	Standard Test Method for Cold Bonding Strength of Refractory Mortar
ASTM D 5403 : 1993 : R2007	Standard Test Methods for Volatile Content of Radiation Curable Materials
ASTM D 5961/D5961M : 2017 : REDLINE	Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 6195 : 2003	Standard Test Methods for Loop Tack
ASTM C 1124/C1124M : 1990 : R2015	Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021)
AASHTO R 44 : 2007(R2018)	Standard Practice for Independent Assurance (IA) Programs
AASHTO TP 118 : 2015	METHOD OF TEST FOR CHARACTERIZATION OF THE AIR-VOID SYSTEM OF FRESHLY MIXED CONCRETE BY THE SEQUENTIAL PRESSURE METHOD
ASTM E 2171 : 2002 : R2013	Standard Practice for Rating-Scale Measures Relevant to the Electronic Health Record (Withdrawn 2017)
ASTM E 384 : 2017 : REDLINE	Standard Test Method for Microindentation Hardness of Materials
ASTM E 2584 : 2014 : REDLINE	Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM D 7785 : 2012	Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
ASTM D 3410/D3410M : 2016 : REDLINE	Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 6248 : 1998 : R2012 : EDT 1	Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021)
ASTM F 1863 : 2016 : REDLINE	Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
ASTM D 6175 : 2003 : R2019	Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles
ASTM D 198 : 2015 : REDLINE	Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM D 7514 : 2014 : REDLINE	Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
ASTM E 2926 : 2017 : REDLINE	Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
ASTM D 7591 : 2012 : R2017	Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
ASTM D 1214:2010	Standard Test Method for Sieve Analysis of Glass Spheres
ASTM D 8133 : 2017	Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry
ASTM C 1124 : 1990 : R1999	Standard Test Method for Kerosene Retention of Asbestos
ASTM D 4222 : 2003 : R2008	Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements
ASTM D 6464 : 2003 : REV A : R2009 : EDT 1	Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM E 3039 : 2016	Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT Specimens
ASTM D 3670 : 1991 : R2014	Standard Guide for Determination of Precision and Bias of Methods of Committee D22
ASTM E 2532 : 2009 : R2017	Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
ASTM C 1182 : 2009 : R2014	Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
ASTM F 2095 : 2007 : EDT 1	Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
ASTM F 2544 : 2011	Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
ASTM C 651 : 2015 : REDLINE	Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
ASTM E 1414/E1414M : 2016 : REDLINE	Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
ASTM A 1013 : 2000 : R2013 : EDT 1	Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
ASTM D 6738 : 2015 : REDLINE	Standard Test Method for Precipitated Silica—Volatile Content
ASTM D 1934 : 1995 : R2012	Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method
ASTM D 8161 : 2017	Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D 6809 : 2002	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM C 1162/C1162M : 1990 : R2015	Standard Test Method for Loose Density of Asbestos (Withdrawn 2021)
ASTM D 2752 : 1988 : R2002 : EDT 1	Standard Test Methods for Air Permeability of Asbestos Fibers
ASTM D 6657 : 2016 : REDLINE	Standard Test Method for pH of Wet Blue and Wet White
ASTM E 2554 : 2013-05	PRACTICE FOR ESTIMATING AND MONITORING THE UNCERTAINTY OF TEST RESULTS OF A TEST METHOD USING CONTROL CHART TECHNIQUES
ASTM E 1489 : 2008 : R2013	Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
ASTM D 2854 : 2009 : R2014	Standard Test Method for Apparent Density of Activated Carbon
ASTM E 1260 : 2003 : R2015	Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM D 7881 : 2013	Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode
ASTM D 6741 : 2010 : R2015	Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
ASTM C 958 : 1992 : R2000	Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
ASTM D 6133 : 2002 : R2008	Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph
ASTM D 4782 : 2010 : R2016	Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
ASTM D 7812 : 2016	Standard Test Method for Tensile Testing of Aramid Paper
ASTM G 132 : 1996 : R2018	Standard Test Method for Pin Abrasion Testing
ASTM D 7584 : 2016 : REDLINE	Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
ASTM D 4438 : 2013	Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting
ASTM D 2589 : 1988 : R2006	Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM F 1284 : 2009	Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
ASTM D 6873 : 2003	Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
ASTM D 5758 : 2001 : R2011 : EDT 1	Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction
ASTM E 111 : 2017 : REDLINE	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM D 2589 : 1988 : R2002 : EDT 2	Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
ASTM D 3639 : 1992 : R2006	Standard Test Method for Classification of Asbestos by Quebec Standard Test
ASTM C 1234 : 2011	Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM E 1540 : 2004	PRACTICE FOR USE OF A RADIOCHROMIC LIQUID DOSIMETRY SYSTEM
ASTM D 7779 : 2011 : R2015	Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM D 7028 : 2007 : R2015	Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM F 1514 : 2003 : R2008	Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
ASTM C 1124 : 1990 : R2004 : EDT 1	Standard Test Method for Kerosene Retention of Asbestos
ASTM D 1214 : 2010 : R2015 : EDT 1	Standard Test Method for Sieve Analysis of Glass Spheres
ASTM C 1124 : 1990 : R2004	Standard Test Method for Kerosene Retention of Asbestos
ASTM E 834 : 2009	Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
ASTM F 1165 : 2015 : REDLINE	Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
ASTM F 2055 : 2017 : REDLINE	Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
ASTM C 557 : 2003 : R2017	Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
ASTM D 3530/D3530M : 1997 : R2003	Standard Test Method for Volatiles Content of Composite Material Prepreg
ISO 20505:2005	Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test
ASTM E 2823 : 2017 : REDLINE	Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
ASTM D 4463/D4463M : 1996 : R2012 : EDT 1	Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM C 549 : 2006 : R2012	Standard Specification for Perlite Loose Fill Insulation
ASTM D 1043 : 2016 : REDLINE	Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D 4085 : 1993 : R2003	Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM C 25 : 2017 : REDLINE	TEST METHODS FOR CHEMICAL ANALYSIS OF LIMESTONE, QUICKLIME, AND HYDRATED LIME
ASTM G 32 : 2016 : REDLINE	Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM C 1292 : 2016 : REDLINE	Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C 1119/C1119M : 1990 : R2015	Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes (Withdrawn 2021)
ASTM E 2455 : 2006 : R2013	Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels (Withdrawn 2022)
ASTM D 7817 : 2012 : R2016	Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
ASTM D 6844 : 2010 : R2015	Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
ASTM D 6415/D6415M : 2006	Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 6415/D6415M : 2006 : REV A : R2013	Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM C 1068 : 2015 : REDLINE	Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D 5158 : 1998 : R2013	Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
ASTM E 839 : 2011 : R2016 : EDT 1	Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
ASTM E 660 : 1990 : R2011	Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
ASTM F 1868 : 2017 : REDLINE	Standard Test Method for Thermal and Evaporative Resistance of Clothing Materials Using a Sweating Hot Plate
ASTM D 6493 : 2011 : R2015	Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
ASTM D 6900 : 2010 : R2015	Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
ASTM D 6809 : 2002 : R2012	Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials
ASTM D 4085 : 1993 : R2008	Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
ASTM C 1382 : 2016 : REDLINE	Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM D 6862:2011	Standard Test Method for 90 Degree Peel Resistance of Adhesives
ASTM D 6647 : 2001	Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
ASTM G 132 : 1996 : R2001	Standard Test Method for Pin Abrasion Testing
ASTM C 1119 : 1990 : R2004 : EDT 1	Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
ASME PTC51 : 2011 : R2016	GAS TURBINE INLET AIR-CONDITIONING EQUIPMENT - PERFORMANCE TEST CODES
ASME PTC51 : 2011	GAS TURBINE INLET AIR-CONDITIONING EQUIPMENT - PERFORMANCE TEST CODES
ASME PTC46 : 2015	PERFORMANCE TEST CODES - OVERALL PLANT PERFORMANCE

Standards Referencing This Book - (Show below) - (Hide below)

ASTM E 2587 : 2016 : REDLINE	Standard Practice for Use of Control Charts in Statistical Process Control

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	E 11
Development Note	Supersedes ASTM C 1095 (12/2001)
Document Type	Redline
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM E 177 : 2019 : REDLINE