ASTM E 83 : 2016 : REDLINE

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Standard Practice for Verification and Classification of Extensometer Systems

Available format(s): PDF

Superseded date: 27-02-2023

Language(s): English

Published date: 25-01-2017

Publisher: American Society for Testing and Materials

Abstract - (Show below) - (Hide below)

CONTAINED IN VOL. 03.01, 2017 Defines procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification.

Scope - (Show below) - (Hide below)

1.1This practice covers procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification. The practice is applicable only to instruments that indicate or record values that are proportional to changes in length corresponding to either tensile or compressive strain. Extensometer systems are classified on the basis of the magnitude of their errors.

1.2Because strain is a dimensionless quantity, this document can be used for extensometers based on either SI or US customary units of displacement.

Note 1:Bonded resistance strain gauges directly bonded to a specimen cannot be calibrated or verified with the apparatus described in this practice for the verification of extensometers having definite gauge points. (See procedures as described in Test Methods E251.)

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Product Information - (Show below) - (Hide below)

Committee	E 28
Document Type	Redline
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM E 83 : 2023 : REDLINE

Standards Referenced By This Book - (Show below) - (Hide below)

ISO/TTA 5:2007	Code of practice for creep/fatigue testing of cracked components
MIL-E-23765-2 Revision E:1994	ELECTRODES AND RODS - WELDING, BARE, SOLID OR ALLOYED CORED, LOW ALLOY STEEL
ASTM B 871 : 2001 : R2013	Standard Test Method for Tear Testing of Aluminum Alloy Products (Withdrawn 2017)
API 5DP CHINESE : 2009	SPECIFICATION FOR DRILL PIPE
ASTM D 790 : 2017 : REDLINE	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
API 5LCP :2006	SPECIFICATION FOR COILED LINE PIPE
17/30361645 DC : DRAFT SEP 2017	BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM D 3039/D3039M : 2017 : REDLINE	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
08/30190263 DC : DRAFT SEP 2008	BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ASTM E 2208 : 2002 : R2010 : EDT 1	Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
API 5ST:2010	SPECIFICATION FOR COILED TUBING
AWS B4.0:2016	STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
ASTM C 469 : 2002	Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM E 251 : 1992 : R2003	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D 638M : 1996	Standard Test Method for Tensile Properties of Plastics (Metric) (Withdrawn 1998)
ASTM D 7248/D7248M : 2012 : R2017	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 3410/D3410M : 2016 : REDLINE	Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E 251 : 1992 : R2014	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D 3089 : 1997 : R2008	Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 4027 : 1998 : R2019	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 2105 : 2001	Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM B 871 : 2001 : R2007	Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM E 1922 : 2004	Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM A 1034/A1034M : 2010 : REV A : R2015	Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM B 500/B500M : 2012	Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
ASTM C 1360 : 2017 : REDLINE	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM E 2309 : 2005	Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM D 3916 : 2008	Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
UNI EN ISO 11960 : 2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ASTM E 2954 : 2015	Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM E 1457 : 2015 : REDLINE	Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM C 1366 : 2004 : R2009	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM B 871 : 2001	Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM C 1361 : 2010 : R2015	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM E 1942 : 1998 : R2010 : EDT 1	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
DIN EN ISO 9513 E : 2013	METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012 + COR 1:2013)
BS EN ISO 11960:2014	Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
EN 61788-18:2013	Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
EN ISO 9513:2012/AC:2013	Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013)
MIL-STD-1312-8 Revision A:1984	FASTENER TEST METHODS - METHOD 8 - TENSILE STRENGTH
MIL-STD-1312-18 Base Document:1985	FASTENER TEST METHOD 18, ELEVATED TEMPERATURE TENSILE STRENGTH
MIL-STD-1312-4 Base Document:1984	FASTENER TEST METHODS, METHOD 4, LAP JOINT SHEAR
MIL-STD-1312-23 Base Document:1985	FASTENER TEST METHODS, METHOD 23, TENSILE STRENGTH OF PANEL FASTENERS
MIL-STD-1312-32 Base Document:1997	FASTENER TEST METHOD, METHOD 32, BARREL NUT TEST
DOD-STD-1312-108 Base Document:1984	FASTENER TEST METHODS, METRIC METHOD 108 TENSILE STRENGTH
MIL-STD-1312-17 Base Document:1985	FASTENER TEST METHODS, METHOD 17, STRESS RELATION
DOT/FAA/AR-MMPDS-01 : 20030131	METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS)
BS EN 61788-19:2014	Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb₃Sn composite superconductors
API 5LCP CHINESE : 2007	SPECIFICATION FOR COILED LINE PIPE
ASTM B 557 : 2015 : REDLINE	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM E 606/E606M : 2012 : REDLINE	Standard Test Method for Strain-Controlled Fatigue Testing
API 5LCP : 2006 : INC : ERR 1 : 2007 : R2012	SPECIFICATION FOR COILED LINE PIPE
AASHTO M 32M/M 32 : 2009 : R2013	SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
ASTM B 500/B500M : 2012 : R2018	Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
AASHTO T 378 : 2017	METHOD OF TEST FOR DETERMINING THE DYNAMIC MODULUS AND FLOW NUMBER FOR ASPHALT MIXTURES USING THE ASPHALT MIXTURE PERFORMANCE TESTER (AMPT)
PREN 4523 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - COMPRESSION TESTING
ASTM D 7205/D7205M:2006	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 1942 : 1998 : R2004	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
SAE AS 7101 : 2007	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
BS EN ISO 11961:2008	Petroleum and natural gas industries. Steel drill pipe
ASTM D 4018 : 2017 : REDLINE	Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
API 934-A : 2008	MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
EN ISO 11961:2008/AC:2009	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
CEI EN 61788-18 : 2014	SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
ASTM D 7205/D7205M : 2006 : R2016	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D 2105 : 2001 : R2007 : EDT 1	Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D 7205/D7205M : 2006 : R2011	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 1773 : 2017 : REDLINE	Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D 3983 : 1998 : R2004	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM A 1034/A1034M : 2010 : REV A	Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM D 3983 : 1998 : R2019	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM E 9 : 2009	Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E 2208 : 2002 : R2010	Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM D 3552 : 2017 : REDLINE	Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM F 2977 : 2013	Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM D 7913/D7913M : 2014	Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
DIN EN ISO 9513:2013-05	Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013)
ISO 11960:2014	Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
I.S. EN ISO 9513:2012	METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012)
I.S. EN ISO 11960:2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ASTM D 6484/D6484M : 2014 : REDLINE	Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
TP 127 : 2017	METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY DENSITY OF ASPHALT BINDER USING THE BINDER FRACTURE ENERGY (BFE) TEST
ASTM E 1856 : 2013 : REDLINE	Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
11/30148484 DC : 0	BS EN ISO 9513 - METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING
ASTM E 517 : 2018 : REDLINE	Standard Test Method for Plastic Strain Ratio r for Sheet Metal
API 5DP : 2010(R2015)	SPECIFICATION FOR DRILL PIPE
CEI EN 61788-19 : 2014	SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
ASTM E 8M : 2004	Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008)
ASTM D 5083 : 2017 : REDLINE	Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D 4027 : 1998 : R2004	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM E 2368 : 2010 : R2017	Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
SAE ARP 5483/5 : 2013	ROLLING ELEMENT BEARING TEST METHOD FOR RADIAL LIMIT AND FRACTURE LOAD TESTING
ASTM C 469 : 2002 : EDT 1	Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM E 1595 : 1998	Standard Practice for Evaluating the Performance of Mechanical Testing Laboratories (Withdrawn 2002)
API 5C8 : 2017	CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING
ASTM D 638 : 2014 : REDLINE	Standard Test Method for Tensile Properties of Plastics
ASTM E 2714 : 2013 : REDLINE	Standard Test Method for Creep-Fatigue Testing
ASTM D 5961/D5961M : 2017 : REDLINE	Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM C 1819 : 2015	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM D 695 : 2015 : REDLINE	Standard Test Method for Compressive Properties of Rigid Plastics
ASTM E 132 : 2017 : REDLINE	Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM D 695M : 1991	Test Method for Compressive Properties of Rigid Plastics (Metric) (Withdrawn 1996)
ASTM C 1366 : 2004 : R2013	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM E 1922 : 2004 : R2015	Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D 2659 : 2016 : REDLINE	Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
ASTM C 1424 : 2015 : REDLINE	TEST METHOD FOR MONOTONIC COMPRESSIVE STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE
ASTM D 6108 : 2013-07	TEST METHOD FOR COMPRESSIVE PROPERTIES OF PLASTIC LUMBER AND SHAPES
ASTM D 4027 : 1998 : R2011	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM E 2368 : 2010	Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ISO 3183-1:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
UNI EN ISO 11961 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
DIN EN ISO 11960:2014-05	Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
BS EN ISO 9513:2012	Metallic materials. Calibration of extensometer systems used in uniaxial testing
ISO 9513:2012	Metallic materials — Calibration of extensometer systems used in uniaxial testing
API 6RS : 1ED 90 SUPP 1	BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT
UNI EN ISO 9513 : 2013	METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING
API 5LCP RUSSIAN : 2012	SPECIFICATION FOR COILED LINE PIPE
ASTM C 469/C469M : 2014 : REDLINE	Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
API 5D : 2001	SPECIFICATION FOR DRILL PIPE
SAE ARP 5448/3 : 2016	PLAIN BEARING LOW SPEED OSCILLATION TEST
ASTM D 4027 : 1998	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 3983 : 1998 : R2011	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM F 606/F606M : 2016 : REDLINE	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
BS EN 61788-18:2013	Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
ASTM C 1337 : 2017 : REDLINE	Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
I.S. EN 61788-18:2013	SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
AASHTO T 244 : 2014	METHOD OF TEST FOR MECHANICAL TESTING OF STEEL PRODUCTS
MIL-E-24403 Revision A:1981	ELECTRODES - WELDING, FLUX CORED, GENERAL SPECIFICATION FOR
ASTM A 1061/A1061M : 2016 : REDLINE	Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
API 5LC : 2015	CRA LINE PIPE
NF EN ISO 11961 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
AASHTO MP 30M/MP 30 : 2017	SPECIFICATION FOR STEEL WIRE AND WELDED WIRE, PLAIN AND DEFORMED, FOR CONCRETE REINFORCEMENT
API 5ST CHINESE : 2010	SPECIFICATION FOR COILED TUBING
ASTM E 1450 : 2016 : REDLINE	Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
API 5CT METRIC : 1995	SPECIFICATION FOR CASING AND TUBING (METRIC UNITS)
SAE ARP 5448/1 : 2016	PLAIN BEARING RADIAL LIMIT AND ULTIMATE LOAD TESTS
SAE ARP 5483/4 : 2013	ROLLING ELEMENT TEST METHOD FOR AXIAL LIMIT AND FRACTURE LOAD TESTING
ASTM F 2183 : 2002	Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
ASTM D 6272 : 2017 : REDLINE	Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C 1499 : 2015 : REDLINE	TEST METHOD FOR MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE
ASTM E 2309/E2309M : 2016 : REDLINE	Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM D 1621 : 2016 : REDLINE	Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D 7615/D7615M : 2011	Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM E 328 : 2013 : REDLINE	Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM D 7248/D7248M : 2012	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 5335 : 2014 : REDLINE	Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM E 229 : 1997	Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
ASTM E 1761 : 1995 : R1999	Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals (Withdrawn 2008)
ASTM E 2760 : 2016 : REDLINE	Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM C 1863 : 2018	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM C 1291 : 2018 : REDLINE	Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
IEC 61788-18:2013	Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
IEC 61788-19:2013	Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
UNE-EN ISO 9513:2013	Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06)
ASTM B 557M : 2015 : REDLINE	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
MIL-G-82841 Base Document:1986
EN ISO 11960:2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ASTM E 8 : 2004	Standard Test Methods for Tension Testing of Metallic Materials
I.S. EN 61788-19:2014	SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
ASTM D 3983 : 1998	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
AASHTO M 32M/M 32 : 2009	SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
03/313799 DC : DRAFT AUG 2003	ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ASTM C 1361 : 2010	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM A 880 : 1995	Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004)
API 5ST : 2010 : R2015	SPECIFICATION FOR COILED TUBING
AASHTO M 225M/M 225 : 2009 : R2013	SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT
ASTM E 8/E8M : 2016-09	TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
ASTM C 1275 : 2018 : REDLINE	Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM D 198 : 2015 : REDLINE	Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM E 251 : 1992 : R2009	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM F 2183 : 2002 : R2008	Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants (Withdrawn 2017)
ASTM A 1034/A1034M : 20101	Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM D 2105 : 2001 : R2014	Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM E 209 : 2018 : REDLINE	Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
I.S. EN ISO 11961:2008	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM D 3916 : 2008 : R2016	Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM E 1942 : 1998 : EDT 1	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM E 111 : 2017 : REDLINE	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E 1942 : 1998 : R2010	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM D 6723 : 2012	Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2021)
ASTM E 1922 : 2004 : R2010 : EDT 1	Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E 2207 : 2015 : REDLINE	Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM D 7774 : 2017 : REDLINE	Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM C 1366 : 2004	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM E 251 : 1992 : R1998	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D 7791 : 2017 : REDLINE	Standard Test Method for Uniaxial Fatigue Properties of Plastics
EN 61788-19:2014	Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Add To Cart

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	E 28
Document Type	Redline
ISBN
Pages
Published
Publisher	American Society for Testing and Materials
Status	Superseded
Superseded By	ASTM E 83 : 2023 : REDLINE

Standards Referenced By This Book - (Show below) - (Hide below)

ISO/TTA 5:2007	Code of practice for creep/fatigue testing of cracked components
MIL-E-23765-2 Revision E:1994	ELECTRODES AND RODS - WELDING, BARE, SOLID OR ALLOYED CORED, LOW ALLOY STEEL
ASTM B 871 : 2001 : R2013	Standard Test Method for Tear Testing of Aluminum Alloy Products (Withdrawn 2017)
API 5DP CHINESE : 2009	SPECIFICATION FOR DRILL PIPE
ASTM D 790 : 2017 : REDLINE	Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
API 5LCP :2006	SPECIFICATION FOR COILED LINE PIPE
17/30361645 DC : DRAFT SEP 2017	BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM D 3039/D3039M : 2017 : REDLINE	Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
08/30190263 DC : DRAFT SEP 2008	BS EN ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ASTM E 2208 : 2002 : R2010 : EDT 1	Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
API 5ST:2010	SPECIFICATION FOR COILED TUBING
AWS B4.0:2016	STANDARD METHODS FOR MECHANICAL TESTING OF WELDS
ASTM C 469 : 2002	Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM E 251 : 1992 : R2003	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D 638M : 1996	Standard Test Method for Tensile Properties of Plastics (Metric) (Withdrawn 1998)
ASTM D 7248/D7248M : 2012 : R2017	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 3410/D3410M : 2016 : REDLINE	Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM E 251 : 1992 : R2014	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D 3089 : 1997 : R2008	Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM D 4027 : 1998 : R2019	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 2105 : 2001	Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM B 871 : 2001 : R2007	Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM E 1922 : 2004	Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM A 1034/A1034M : 2010 : REV A : R2015	Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM B 500/B500M : 2012	Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
ASTM C 1360 : 2017 : REDLINE	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM E 2309 : 2005	Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM D 3916 : 2008	Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
UNI EN ISO 11960 : 2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ASTM E 2954 : 2015	Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
ASTM E 1457 : 2015 : REDLINE	Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM C 1366 : 2004 : R2009	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM B 871 : 2001	Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM C 1361 : 2010 : R2015	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM E 1942 : 1998 : R2010 : EDT 1	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
DIN EN ISO 9513 E : 2013	METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012 + COR 1:2013)
BS EN ISO 11960:2014	Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
EN 61788-18:2013	Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
EN ISO 9513:2012/AC:2013	Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013)
MIL-STD-1312-8 Revision A:1984	FASTENER TEST METHODS - METHOD 8 - TENSILE STRENGTH
MIL-STD-1312-18 Base Document:1985	FASTENER TEST METHOD 18, ELEVATED TEMPERATURE TENSILE STRENGTH
MIL-STD-1312-4 Base Document:1984	FASTENER TEST METHODS, METHOD 4, LAP JOINT SHEAR
MIL-STD-1312-23 Base Document:1985	FASTENER TEST METHODS, METHOD 23, TENSILE STRENGTH OF PANEL FASTENERS
MIL-STD-1312-32 Base Document:1997	FASTENER TEST METHOD, METHOD 32, BARREL NUT TEST
DOD-STD-1312-108 Base Document:1984	FASTENER TEST METHODS, METRIC METHOD 108 TENSILE STRENGTH
MIL-STD-1312-17 Base Document:1985	FASTENER TEST METHODS, METHOD 17, STRESS RELATION
DOT/FAA/AR-MMPDS-01 : 20030131	METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS)
BS EN 61788-19:2014	Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb₃Sn composite superconductors
API 5LCP CHINESE : 2007	SPECIFICATION FOR COILED LINE PIPE
ASTM B 557 : 2015 : REDLINE	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM E 606/E606M : 2012 : REDLINE	Standard Test Method for Strain-Controlled Fatigue Testing
API 5LCP : 2006 : INC : ERR 1 : 2007 : R2012	SPECIFICATION FOR COILED LINE PIPE
AASHTO M 32M/M 32 : 2009 : R2013	SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
ASTM B 500/B500M : 2012 : R2018	Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors
AASHTO T 378 : 2017	METHOD OF TEST FOR DETERMINING THE DYNAMIC MODULUS AND FLOW NUMBER FOR ASPHALT MIXTURES USING THE ASPHALT MIXTURE PERFORMANCE TESTER (AMPT)
PREN 4523 : 200P1	AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - COMPRESSION TESTING
ASTM D 7205/D7205M:2006	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 1942 : 1998 : R2004	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
SAE AS 7101 : 2007	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
BS EN ISO 11961:2008	Petroleum and natural gas industries. Steel drill pipe
ASTM D 4018 : 2017 : REDLINE	Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
API 934-A : 2008	MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE
EN ISO 11961:2008/AC:2009	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
CEI EN 61788-18 : 2014	SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
ASTM D 7205/D7205M : 2006 : R2016	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D 2105 : 2001 : R2007 : EDT 1	Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D 7205/D7205M : 2006 : R2011	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM C 1773 : 2017 : REDLINE	Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
ASTM D 3983 : 1998 : R2004	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM A 1034/A1034M : 2010 : REV A	Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM D 3983 : 1998 : R2019	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM E 9 : 2009	Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E 2208 : 2002 : R2010	Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM D 3552 : 2017 : REDLINE	Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM F 2977 : 2013	Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM D 7913/D7913M : 2014	Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
DIN EN ISO 9513:2013-05	Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013)
ISO 11960:2014	Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
I.S. EN ISO 9513:2012	METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012)
I.S. EN ISO 11960:2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ASTM D 6484/D6484M : 2014 : REDLINE	Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
TP 127 : 2017	METHOD OF TEST FOR DETERMINING THE FRACTURE ENERGY DENSITY OF ASPHALT BINDER USING THE BINDER FRACTURE ENERGY (BFE) TEST
ASTM E 1856 : 2013 : REDLINE	Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
11/30148484 DC : 0	BS EN ISO 9513 - METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING
ASTM E 517 : 2018 : REDLINE	Standard Test Method for Plastic Strain Ratio r for Sheet Metal
API 5DP : 2010(R2015)	SPECIFICATION FOR DRILL PIPE
CEI EN 61788-19 : 2014	SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
ASTM E 8M : 2004	Standard Test Methods for Tension Testing of Metallic Materials [Metric] (Withdrawn 2008)
ASTM D 5083 : 2017 : REDLINE	Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D 4027 : 1998 : R2004	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM E 2368 : 2010 : R2017	Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
SAE ARP 5483/5 : 2013	ROLLING ELEMENT BEARING TEST METHOD FOR RADIAL LIMIT AND FRACTURE LOAD TESTING
ASTM C 469 : 2002 : EDT 1	Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
ASTM E 1595 : 1998	Standard Practice for Evaluating the Performance of Mechanical Testing Laboratories (Withdrawn 2002)
API 5C8 : 2017	CARE, MAINTENANCE, AND INSPECTION OF COILED TUBING
ASTM D 638 : 2014 : REDLINE	Standard Test Method for Tensile Properties of Plastics
ASTM E 2714 : 2013 : REDLINE	Standard Test Method for Creep-Fatigue Testing
ASTM D 5961/D5961M : 2017 : REDLINE	Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM C 1819 : 2015	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
ASTM D 695 : 2015 : REDLINE	Standard Test Method for Compressive Properties of Rigid Plastics
ASTM E 132 : 2017 : REDLINE	Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM D 695M : 1991	Test Method for Compressive Properties of Rigid Plastics (Metric) (Withdrawn 1996)
ASTM C 1366 : 2004 : R2013	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM E 1922 : 2004 : R2015	Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D 2659 : 2016 : REDLINE	Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers
ASTM C 1424 : 2015 : REDLINE	TEST METHOD FOR MONOTONIC COMPRESSIVE STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE
ASTM D 6108 : 2013-07	TEST METHOD FOR COMPRESSIVE PROPERTIES OF PLASTIC LUMBER AND SHAPES
ASTM D 4027 : 1998 : R2011	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM E 2368 : 2010	Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ISO 3183-1:1996	Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A
UNI EN ISO 11961 : 2009	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
DIN EN ISO 11960:2014-05	Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
BS EN ISO 9513:2012	Metallic materials. Calibration of extensometer systems used in uniaxial testing
ISO 9513:2012	Metallic materials — Calibration of extensometer systems used in uniaxial testing
API 6RS : 1ED 90 SUPP 1	BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT
UNI EN ISO 9513 : 2013	METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING
API 5LCP RUSSIAN : 2012	SPECIFICATION FOR COILED LINE PIPE
ASTM C 469/C469M : 2014 : REDLINE	Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression
API 5D : 2001	SPECIFICATION FOR DRILL PIPE
SAE ARP 5448/3 : 2016	PLAIN BEARING LOW SPEED OSCILLATION TEST
ASTM D 4027 : 1998	Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
ASTM D 3983 : 1998 : R2011	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM F 606/F606M : 2016 : REDLINE	Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
BS EN 61788-18:2013	Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
ASTM C 1337 : 2017 : REDLINE	Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
I.S. EN 61788-18:2013	SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS
AASHTO T 244 : 2014	METHOD OF TEST FOR MECHANICAL TESTING OF STEEL PRODUCTS
MIL-E-24403 Revision A:1981	ELECTRODES - WELDING, FLUX CORED, GENERAL SPECIFICATION FOR
ASTM A 1061/A1061M : 2016 : REDLINE	Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
API 5LC : 2015	CRA LINE PIPE
NF EN ISO 11961 : 2010	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
AASHTO MP 30M/MP 30 : 2017	SPECIFICATION FOR STEEL WIRE AND WELDED WIRE, PLAIN AND DEFORMED, FOR CONCRETE REINFORCEMENT
API 5ST CHINESE : 2010	SPECIFICATION FOR COILED TUBING
ASTM E 1450 : 2016 : REDLINE	Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
API 5CT METRIC : 1995	SPECIFICATION FOR CASING AND TUBING (METRIC UNITS)
SAE ARP 5448/1 : 2016	PLAIN BEARING RADIAL LIMIT AND ULTIMATE LOAD TESTS
SAE ARP 5483/4 : 2013	ROLLING ELEMENT TEST METHOD FOR AXIAL LIMIT AND FRACTURE LOAD TESTING
ASTM F 2183 : 2002	Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
ASTM D 6272 : 2017 : REDLINE	Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM C 1499 : 2015 : REDLINE	TEST METHOD FOR MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE
ASTM E 2309/E2309M : 2016 : REDLINE	Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM D 1621 : 2016 : REDLINE	Standard Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D 7615/D7615M : 2011	Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
ASTM E 328 : 2013 : REDLINE	Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM D 7248/D7248M : 2012	Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 5335 : 2014 : REDLINE	Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM E 229 : 1997	Standard Test Method for Shear Strength and Shear Modulus of Structural Adhesives (Withdrawn 2003)
ASTM E 1761 : 1995 : R1999	Standard Guide for Recommended Formats for Data Records Used in Computerization of Fatigue and Fracture Data of Metals (Withdrawn 2008)
ASTM E 2760 : 2016 : REDLINE	Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM C 1863 : 2018	Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
ASTM C 1291 : 2018 : REDLINE	Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
IEC 61788-18:2013	Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
IEC 61788-19:2013	Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
UNE-EN ISO 9513:2013	Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06)
ASTM B 557M : 2015 : REDLINE	Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
MIL-G-82841 Base Document:1986
EN ISO 11960:2014	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
ASTM E 8 : 2004	Standard Test Methods for Tension Testing of Metallic Materials
I.S. EN 61788-19:2014	SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS
ASTM D 3983 : 1998	Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
AASHTO M 32M/M 32 : 2009	SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT
03/313799 DC : DRAFT AUG 2003	ISO 11960 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ASTM C 1361 : 2010	Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
ASTM A 880 : 1995	Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004)
API 5ST : 2010 : R2015	SPECIFICATION FOR COILED TUBING
AASHTO M 225M/M 225 : 2009 : R2013	SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT
ASTM E 8/E8M : 2016-09	TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
ASTM C 1275 : 2018 : REDLINE	Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM D 198 : 2015 : REDLINE	Standard Test Methods of Static Tests of Lumber in Structural Sizes
ASTM E 251 : 1992 : R2009	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM F 2183 : 2002 : R2008	Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants (Withdrawn 2017)
ASTM A 1034/A1034M : 20101	Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
ASTM D 2105 : 2001 : R2014	Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM E 209 : 2018 : REDLINE	Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
I.S. EN ISO 11961:2008	PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE
ASTM D 3916 : 2008 : R2016	Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM E 1942 : 1998 : EDT 1	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM E 111 : 2017 : REDLINE	Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E 1942 : 1998 : R2010	Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM D 6723 : 2012	Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2021)
ASTM E 1922 : 2004 : R2010 : EDT 1	Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM E 2207 : 2015 : REDLINE	Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
ASTM D 7774 : 2017 : REDLINE	Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM C 1366 : 2004	Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
ASTM E 251 : 1992 : R1998	Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM D 7791 : 2017 : REDLINE	Standard Test Method for Uniaxial Fatigue Properties of Plastics
EN 61788-19:2014	Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

View more information

ASTM E 83 : 2016 : REDLINE

Add To Cart

Access your standards online with a subscription