Skip to content
Please enter a keyword to search

  • ASTM F 2581 : 2012 : R2017

    Current The latest, up-to-date edition.

    Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  08-09-2017

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 13.02, 2017 Specifies the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 11manganese-17chromium-3molybdenum low-nickel stainless steel alloy bar and wire for surgical implants.

    Scope - (Show below) - (Hide below)

    1.1This specification covers the chemical, mechanical, and metallurgical requirements for wrought nitrogen strengthened 11manganese-17chromium-3molybdenum low-nickel stainless steel alloy bar and wire for surgical implants.

    1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

    General Product Information - (Show below) - (Hide below)

    Committee F 04
    Document Type Standard
    Product Note Reconfirmed 2017
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM F 621 : 2012 : R2021 : EDT 1 Standard Specification for Stainless Steel Forgings for Surgical Implants
    ASTM F 3160 : 2021 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
    ASTM F 2181 : 2020 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
    ASTM F 2181 : 2014 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
    ASTM F 621 : 2012 : R2017 Standard Specification for Stainless Steel Forgings for Surgical Implants
    ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM F 1314 : 2013 : REV A : EDT 1 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM F 746 : 2004 : R2014 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
    ASTM A 555/A555M : 2020 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
    ASTM F 1314 : 2007 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM E 8/E8M : 2024 Standard Test Methods for Tension Testing of Metallic Materials
    SAE AMS 2248 : 2016 CHEMICAL CHECK ANALYSIS LIMITS, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, MARAGING AND OTHER HIGHLY-ALLOYED STEELS, AND IRON ALLOYS
    ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
    ASTM E 29 : 2013 : R2019 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM F 1314 : 2018 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM A 484/A484M : 2023 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
    SAE AMS 2630 : 2010 INSPECTION, ULTRASONIC, PRODUCT OVER 0.5 INCH (12.7 MM) THICK
    ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
    ASTM A 555/A555M : 2021 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
    ASTM E 18 : 2022 Standard Test Methods for Rockwell Hardness of Metallic Materials
    ASTM E 10 : 2023 Standard Test Method for Brinell Hardness of Metallic Materials
    ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    ASTM E 45 : 1997 : EDT 2 Standard Test Methods for Determining the Inclusion Content of Steel
    ASTM E 10 : 2001 Standard Test Method for Brinell Hardness of Metallic Materials
    ASTM E 45 : 2018 : REV A Standard Test Methods for Determining the Inclusion Content of Steel
    ASTM F 1586 : 2002 Standard Specification for Wrought Nitrogen Strengthened 21 Chromium—10 Nickel—3 Manganese—2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)
    ASTM A 484/A484M : 2021 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
    ASTM E 354 : 2021 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
    ASTM A 262 : 2001 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    ISO 6892:1998 Metallic materials Tensile testing at ambient temperature
    ASTM E 18 : 2020 Standard Test Methods for Rockwell Hardness of Metallic Materials
    ASTM E 10 : 2017-05 TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
    ASTM F 1586 : 2008 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
    ASTM A 555/A555M : 2022 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
    ASTM A 751 : 2021 Standard Test Methods and Practices for Chemical Analysis of Steel Products
    ASTM A 555/A555M : 2023 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
    ASTM E 8/E8M : 2022 Standard Test Methods for Tension Testing of Metallic Materials
    ASTM A 262 : 1998 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    ASTM E 45 : 2018 : REV A : R2023 Standard Test Methods for Determining the Inclusion Content of Steel
    ASTM F 1586 : 2013 : EDT 1 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
    ASTM F 1314 : 2001 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM E 354 : 2021 : EDT 1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
    ASTM A 484/A484M : 2022 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
    ASTM F 748 : 2016 : REDLINE Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
    ASTM F 746 : 2004 : R2021 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
    ASTM A 262 : 2015 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    ASTM A 751 : 2020 Standard Test Methods and Practices for Chemical Analysis of Steel Products
    ASTM F 1314 : 2013 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM A 484/A484M : 2024 Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
    ASTM F 1586 : 2021 Standard Specification for Wrought Nitrogen Strengthened 21Chromium—10Nickel—3Manganese—2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
    ASTM E 18 : 2019 Standard Test Methods for Rockwell Hardness of Metallic Materials
    ISO 9001:2015 Quality management systems — Requirements
    ASTM F 1314 : 1995 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
    ASTM E 354 : 2014 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
    ASTM F 1586 : 1995 Standard Specification for Wrought Nitrogen Strengthened 21 Chromium—10 Nickel—3 Manganese—2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)
    ASTM E 112 : 2013 : R2021 Standard Test Methods for Determining Average Grain Size
    ASTM E 112 : 2013 Standard Test Methods for Determining Average Grain Size
    ASTM A 555/A555M : 2016 : REDLINE Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
    ASTM A 484/A484M : 2023 : REV A Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
    ASTM E 407 : 2007 : R2015 : EDT 1 Standard Practice for Microetching Metals and Alloys
    ASTM A 484/A484M : 2020 : REV B Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
    ASTM E 407 : 2023 Standard Practice for Microetching Metals and Alloys
    ASTM E 354 : 2014 : REDLINE Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
    ASTM E 8/E8M : 2016-09 TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
    ASTM E 10 : 2018 Standard Test Method for Brinell Hardness of Metallic Materials
    ASTM A 262 : 2015 : R2021 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    ASTM E 29 : 2022 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective