• BS 5908-1:2012

    Current The latest, up-to-date edition.

    Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  31-12-2012

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions and abbreviations
    Section 1: Fire risk assessments
    4 Fire risk assessment and fire precautions
    Section 2: Site layout and design
    5 Selection of site and layout
    6 Access for firefighting
    7 Water supplies
    8 Drainage and pollution control
    9 Prevention of escalation
    Section 3: Buildings and structures
    10 Fire resistance
    11 Compartmentation
    12 Fire detection and fire alarm systems
    13 Open air and unenclosed plant
    14 Materials of construction
    15 Ventilation
    16 Means of escape
    17 Lighting
    18 Space heating
    Section 4: Precautions against ignition followed by
               an explosion
    19 General
    20 Prevention of bursting of a pressure vessel caused
       by excess internal pressure
    21 Prevention of bursting of process equipment caused
       by a chemical reaction
    22 Prevention of ignition of a mixture of air and gas or
       vapour inside process equipment or a storage vessel
    23 Prevention of ignition of a cloud of dust suspended
       in air inside process equipment or a storage vessel
    24 Prevention of ignition of a mixture of air and
       gas/vapour released from a process into a building
    25 Prevention of ignition of a cloud of dust raised into
       suspension within a building, following some
       initiating primary explosion
    26 Prevention of ignition of a mixture of air and
       gas/vapour into a partially confined (congested)
       area of a process plant
    27 Prevention of ignition of a mixture of air and gas
       in the open air
    28 Prevention of bursting of a pressure vessel holding
       flammable liquids or liquefied gases, followed
       by sudden ignition of the released material
    Section 5: Storage and movement of chemicals
    29 General
    30 Storage of chemicals
    31 Delivery by road and rail
    Section 6: Design of process plant
    32 Design of process plant to control ignition hazards
    33 Process vessels
    34 Pumps and heat transfer systems
    35 Compressors
    36 Fired heaters
    37 Ovens and driers
    38 Dust-handling process plant
    39 Instrumentation
    Section 7: Operation of process plant
    40 Human factors
    41 Emergency procedures
    Section 8: Maintenance of process plant
    42 Maintenance
    43 Hot work
    Section 9: Fire prevention
    44 General fire prevention
    45 Hazardous area classification study
    46 Static electricity
    Section 10: Works fire brigades and fixed fire protection
    47 Works fire brigades
    48 Fixed fire protection
    Annexes
    Annex A (informative) - Classification of chemicals
    Annex B (informative) - Ignition sources
    Annex C (informative) - Hazards from smoke
    Annex D (informative) - Approaches to hazardous
            area classification
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides recommendations and guidance for the control of fire and explosion risks on sites at which chemicals are stored or processed in significant quantities.

    Scope - (Show below) - (Hide below)

    This British Standard gives recommendations and guidance for the control of fire and explosion risks on sites at which chemicals are stored or processed in significant quantities.

    NOTE1 These precautions may extend well beyond those required under the fire safety legislation applicable to places of work, because of the wider range of risks. Additional legal requirements arise largely from the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR) [1, 2], and the Health and Safety at Work legislation [3, 4].

    NOTE2 AnnexA gives guidance on the classification of chemicals, while AnnexB discusses ignition sources and AnnexC covers hazards from smoke. AnnexD gives guidance on the approaches to hazardous area classification.

    The precautions recommended by this British Standard also address risks on and off site, within and external to buildings, that arise from the release of toxic materials, ejection of chemical containers from a fire, flowing fires where liquid products are handled, and special firefighting techniques.

    The recommendations of his code of practice cover location, plant layout and design, separation distances, particular types of plant and facility with special fire hazards and other issues. Particular precautions might be relevant to preserving life safety or the health of persons on or off site; to property protection; and to protection of the environment.

    General Product Information - (Show below) - (Hide below)

    Committee EXL/23
    Development Note Supersedes BS 5908(1990) & 12/30258579 DC. (12/2012)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations

    Standards Referencing This Book - (Show below) - (Hide below)

    BS EN 62305-1:2011 Protection against lightning General principles
    PD CLC/TR 50404:2003 Electrostatics. Code of practice for the avoidance of hazards due to static electricity
    BS 7346-4:2003 Components for smoke and heat control systems Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing steady-state design fires. Code of practice
    BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
    BS EN 14122:2014 Foodstuffs. Determination of vitamin B1 by high performance liquid chromatography
    BS EN 14797:2006 Explosion venting devices
    NFPA 654 : 2017 PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS
    BS EN ISO 13943:2017 Fire safety. Vocabulary
    API 2000 : 2014 VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
    BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    EEMUA 191 : 2013 ALARM SYSTEMS - GUIDE TO DESIGN, MANAGEMENT AND PROCUREMENT
    API 620 : 2013 DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS
    BS EN 1991-1-2:2002 Eurocode 1. Actions on structures General actions. Actions on structures exposed to fire
    BS EN 976-1:1997 Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels Requirements and test methods for single wall tanks
    ASME B31.3:2016 PROCESS PIPING
    BS EN 12285-1:2003 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
    NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
    BS EN 15188:2007 Determination of the spontaneous ignition behaviour of dust accumulations
    BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
    BS EN 13565-1 : 2003 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    BS EN 60079-10-1:2015 Explosive atmospheres Classification of areas. Explosive gas atmospheres
    BS EN 1539:2015 Dryers and ovens, in which flammable substances are released. Safety requirements
    BS EN ISO 10439:2002 Petroleum, chemical and gas service industries. Centrifugal compressors
    BS EN 54-2 : 1998 FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 2: CONTROL AND INDICATING EQUIPMENT
    BS EN 12285-2:2005 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
    BS 7346-5:2005 Components for smoke and heat control systems Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice
    BS EN 16009:2011 Flameless explosion venting devices
    EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
    DD CEN/TS 14816:2008 Fixed firefighting systems. Water spray systems. Design and installation
    BS EN 13565-2:2009 Fixed firefighting systems. Foam systems Design, construction and maintenance
    BS EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
    PD CEN/TR 15281:2006 Guidance on inerting for the prevention of explosions
    BS EN 14491:2012 Dust explosion venting protective systems
    BS EN 61511-1:2004 Functional safety. Safety instrumented systems for the process industry sector Framework, definitions, system, hardware and software requirements
    BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
    BS EN 12921-3 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 3: SAFETY OF MACHINES USING FLAMMABLE CLEANING LIQUIDS
    BS EN 61511-2:2004 Functional safety. Safety instrumented systems for the process industry sector Guidelines for the application of IEC 61511-1
    BS EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
    API 650 : 2013 WELDED TANKS FOR OIL STORAGE
    BS IEC 61882:2001 Hazard and operability studies (HAZOP studies). Application guide
    BS EN 1012-1:2010 Compressors and vacuum pumps. Safety requirements Air compressors
    BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
    EI MODEL CODE SAFE PRACTICE PT19 : 2012 FIRE PRECAUTIONS AT PETROLEUM REFINERIES AND BULK STORAGE INSTALLATIONS
    BS EN 13575:2012 Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods
    BS EN 1598:2011 Health and safety in welding and allied processes. Transparent welding curtains, strips and screens for arc welding processes
    BS EN 14994:2007 Gas explosion venting protective systems
    1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective