BS 959:1950
|
Specification for internal micrometers (including stick micrometers) |
ISO 1432:2013
|
Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
BS EN 10002-3:1995
|
Tensile testing of metallic materials Calibration of force proving instruments used for the verification of uniaxial testing machines |
BS 5204-2:1977
|
Specification for straightedges Steel or granite straightedges of rectangular section |
BS 1797:1987
|
Schedule for tables for use in the calibration of volumetric glassware |
BS 1685:1951
|
Specification for bevel protractors (mechanical and optical) |
BS EN 10003-1:1995
|
Metallic materials. Brinell hardness test Test method |
BS 5214-2:1978
|
Specification for testing machines for rubbers and plastics Constant rate of force application machines |
BS 3730-3:1982
|
Assessment of departures from roundness Methods for determining departures from roundness using two- and three-point measurement |
BS 89-2:1990
|
Direct acting indicating analogue electrical measuring instruments and their accessories Specification for special requirements for ammeters and voltmeters |
BS 6808-3:1989
|
Coordinate measuring machines Code of practice |
BS 3730-2:1982
|
Assessment of departures from roundness Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration) |
BS 907:1965
|
Specification for dial gauges for linear measurement |
BS EN 61028:1993
|
Specification for electrical measuring instruments. X-Y recorders |
BS 4175:1989
|
Methods for superficial hardness test (Rockwell method) and for verification of superficial hardness testing machines (Rockwell method) |
BS 89-3:1990
|
Direct acting indicating analogue electrical measuring instruments and their accessories Specification for special requirements for wattmeters and varmeters |
BS 5214-1:1995
|
Specification for testing machines for rubbers and plastics Tensile, flexural and compression types (constant rate of traverse) |
BS EN 61143-1:1994
|
Specification for electrical measuring instruments. X-t recorders Definitions and requirements |
BS 3145:1978
|
Specification for laboratory pH meters |
BS 7118-2:1989
|
Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devices Non-linear calibration relationships |
BS 870:1950
|
Specification for external micrometers |
BS 6808-1:1987
|
Coordinate measuring machines Glossary of terms |
BS EN 10003-3:1995
|
Metallic materials. Brinell hardness test Calibration of standardized blocks to be used for Brinell hardness testing machines |
BS 89-4:1990
|
Direct acting indicating analogue electrical measuring instruments and their accessories Specification for special requirements for frequency meters |
BS 1134-2:1990
|
Assessment of surface texture. Guidance and general information |
BS EN 10002-4:1995
|
Tensile testing of metallic materials Verification of extensometers used in uniaxial testing |
BS 4778(1979) : LATEST
|
QUALITY VOCABULARY |
BS 6808-2:1987
|
Coordinate measuring machines Methods for verifying performance |
BS 6461-2:1984
|
Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for factory-made insulated chimneys for internal applications |
BS 6345:1983
|
Method for measurement of radio interference terminal voltage of lighting equipment |
ISO Guide 30:2015
|
Reference materials Selected terms and definitions |
PD 6461-1:1995
|
General metrology Basic and general terms (VIM) |
BS 5204-1:1975
|
Specification for straightedges Cast iron straightedges (bow shaped and I-section) |
BS 89-9:1990
|
Direct acting indicating analogue electrical measuring instruments and their accessories Recommended test methods |
BS EN 10002-2:1992
|
Tensile testing of metallic materials Verification of the force measuring system of the tensile testing machine |
BS 939:1977
|
Specification for engineers\' squares (including cylindrical and block squares) |
BS 7194:1990
|
Specification for direct-current and low-frequency electronic measuring instruments with a digital display |
BS 852:1939
|
Specification for toolmakers\' straightedges |
BS EN 61143-2:1994
|
Specification for electrical measuring instruments. X-t recorders Recommended additional test methods |
BS 7118-1:1990
|
Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement devices Linear calibration relationships |
BS 427:1990
|
Method for Vickers hardness test and for verification of Vickers hardness testing machines |
BS EN 30012-1:1994
|
Quality assurance requirements for measuring equipment. Metrological confirmation system for measuring equipment |
BS 4372:1968
|
Specification for engineers\' steel measuring rules |
BS 6696:1986
|
Methods for use and testing of capacity of volumetric glassware |
BS 7012-8:1990
|
Light microscopes Specification for surface marked graticules for eyepieces |
BS 6199-1.2:1991
|
Measurement of liquid flow in closed conduits using weighing and volumetric methods. Weighing method Procedures for checking static weighing systems |
BS 89-6:1990
|
Direct acting indicating analogue electrical measuring instruments and their accessories Specification for special requirements for ohmmeters (impedance meters) and conductance meters |
BS 5233:1986
|
Glossary of terms used in metrology (incorporating BS 2643) |
BS EN 10002-1:2001
|
Tensile testing of metallic materials Method of test at ambient temperature |
BS EN 26789:1994
|
Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods |
BS 89-1:1990
|
Direct acting indicating analogue electrical measuring instruments and their accessories Specification for definitions and general requirements common to all Parts |
BS EN 10003-2:1995
|
Metallic materials. Brinell hardness test Verification of Brinell hardness testing machines |
BS 1610-3:1990
|
Materials testing machines and force verification equipment Specification for the grading of the forces applied by deadweight and lever creep testing machines |
BS 1054:1975
|
Specification for engineers\' comparators for external measurement |