ASTM B 234M : 2017 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
EN 13957:2008
|
Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification |
EN 485-1:2016
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
EN 755-1:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery |
ISO 8496:2013
|
Metallic materials Tube Ring tensile test |
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
EN ISO 8493 : 2004
|
Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
EN 754-3:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form |
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
EN 754-7:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 755-5:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form |
EN 13445-5 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
EN ISO 3452-1:2013
|
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 485-3:2003
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products |
EN 755-9:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form |
EN 4050-3 : 2012
|
AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 3: REFERENCE BLOCKS |
EN 485-4:1993
|
Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products |
EN ISO 8495:2013
|
Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) |
EN 755-3:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form |
EN ISO 8496:2013
|
Metallic materials - Tube - Ring tensile test (ISO 8496:2013) |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN 4050-4:2012
|
AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 4: ACCEPTANCE CRITERIA |
EN 755-8:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 755-4:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form |
EN 12516-4:2014
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
EN 4050-1 : 2012
|
AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 1: GENERAL REQUIREMENTS |
ISO 8493:1998
|
Metallic materials Tube Drift-expanding test |
EN 586-3:2001
|
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
EN 755-7:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form |
EN 12020-2:2016/AC:2017
|
ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 2: TOLERANCES ON DIMENSIONS AND FORM |
EN 13445-8 : 2014 COR 2017
|
UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN 754-6:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form |
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
EN 755-6:2008
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form |
EN 12258-1:2012
|
Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms |
EN 1779:1999/A1:2003
|
NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR METHOD AND TECHNIQUE SELECTION |
EN 1370:2011
|
Founding - Examination of surface condition |
EN 1706:2010
|
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties |
EN 1371-1:2011
|
Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
EN 754-1:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery |
EN 13958:2008
|
Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification |
EN 1559-1:2011
|
Founding - Technical conditions of delivery - Part 1: General |
EN 2101 : 1991
|
AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
EN 941:2014
|
Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications |
EN 754-5:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form |
ISO 8495:2013
|
Metallic materials Tube Ring-expanding test |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 586-1:1997
|
Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery |
EN 754-8:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form |
EN 13480-8:2017
|
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
ISO 8492:2013
|
Metallic materials Tube Flattening test |
EN 12681 : 2003
|
FOUNDING - RADIOGRAPHIC EXAMINATION |
EN 754-2:2016
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
EN ISO 8492:2013
|
Metallic materials - Tube - Flattening test (ISO 8492:2013) |
ASTM B 241/B241M : 2016 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
EN 14361:2004
|
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts |
EN 1559-4:2015
|
Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
EN 13480-5:2017
|
Metallic industrial piping - Part 5: Inspection and testing |
EN 14726:2005
|
Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
EN 4050-2 : 2012
|
AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - PART 2: PERFORMANCE OF TEST |
EN 754-4:2008
|
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form |
EN 755-2:2016
|
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties |
EN 12020-1:2008
|
Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery |
ASTM E 215 : 2016 : REDLINE
|
Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube |