EN 1127-1:2011
|
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
ISO 5802:2001
|
Industrial fans — Performance testing in situ |
EN 60079-1:2014
|
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
EN 1710:2005+A1:2008/AC:2010
|
EQUIPMENT AND COMPONENTS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES |
ISO 14694:2003
|
Industrial fans Specifications for balance quality and vibration levels |
ISO 9563:2015
|
Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
EN 60034-1:2010/corrigendum Oct. 2010
|
ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
EN ISO 80079-36:2016
|
Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
EN 60079-15:2010
|
Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
EN 60335-2-80:2003/A2:2009
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-80: PARTICULAR REQUIREMENTS FOR FANS |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
CLC/TR 60079-32-1:2015
|
Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
ISO 1940-1:2003
|
Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
EN 13237:2012
|
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
EN ISO 5802:2008/A1:2015
|
INDUSTRIAL FANS - PERFORMANCE TESTING IN SITU (ISO 5802:2001/AMD 1:2015) |
EN 60079-6:2015
|
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" |
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
ISO 13351:2009
|
Fans — Dimensions |
EN ISO 13349:2010
|
Fans - Vocabulary and definitions of categories (ISO 13349:2010) |
ISO 80079-36:2016
|
Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 281:2007
|
Rolling bearings Dynamic load ratings and rating life |
EN ISO 13351:2009
|
Fans - Dimensions (ISO 13351:2009) |
EN ISO 5801:2017
|
Fans - Performance testing using standardized airways (ISO 5801:2017) |
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
ISO 14695:2003
|
Industrial fans Method of measurement of fan vibration |
EN 1755:2015
|
Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres |
ISO 1813:2014
|
Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
ISO 1925:2001
|
Mechanical vibration Balancing Vocabulary |
ISO 80079-37:2016
|
Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
EN 13463-2:2004
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection by flow restricting enclosure 'fr' |
ISO 16852:2016
|
Flame arresters Performance requirements, test methods and limits for use |
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
EN 60079-14:2014/AC:2016
|
EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
EN 60079-5:2015
|
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
EN 13463-3:2005
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd' |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
TRAC 201 : 1990
|
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN 1652:1997/AC:2003
|
COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
EN ISO 80079-37:2016
|
Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
EN ISO 16852:2016
|
Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016) |
ISO 13349:2010
|
Fans — Vocabulary and definitions of categories |
EN 60079-2:2014/AC:2015
|
EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P' (IEC 60079-2:2014) |