EN ISO 3377-1:2011
|
Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
EN 943-2:2002
|
Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) |
EN ISO 3376:2011
|
Leather - Physical and mechanical tests - Determination of tensile strength and percentage extension (ISO 3376:2011) |
ISO 4045:2008
|
Leather Chemical tests Determination of pH |
PREN ISO 20347 : DRAFT 2009
|
PERSONAL PROTECTIVE EQUIPMENT - OCCUPATIONAL FOOTWEAR |
89/686/EEC : 1989 AMD 5 2012
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN 13832-1:2006
|
Footwear protecting against chemicals - Part 1: Terminology and test methods |
EN ISO 20344:2011
|
Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
ISO 4649:2017
|
Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
ISO 6942:2002
|
Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
EN ISO 4674-2:1998
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 2: BALLISTIC PENDULUM METHOD |
ISO 3758:2012
|
Textiles — Care labelling code using symbols |
EN 388 : 1994
|
PROTECTIVE GLOVES AGAINST MECHANICAL RISKS |
ISO 2023:1994
|
Rubber footwear Lined industrial vulcanized-rubber boots Specification |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
EN ISO 4045:2008
|
Leather - Chemical tests - Determination of pH (ISO 4045:2008) |
ISO 15538:2001
|
Protective clothing for firefighters — Laboratory test methods and performance requirements for protective clothing with a reflective outer surface |
ISO 15025:2016
|
Protective clothing Protection against flame Method of test for limited flame spread |
EN 13832-3:2006
|
Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
ISO 3377-2:2016
|
Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tear |
EN ISO 3377-2:2016
|
Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear (ISO 3377-2:2016) |
EN ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
ISO 4643:1992
|
Moulded plastics footwear Lined or unlined poly(vinyl chloride) boots for general industrial use Specification |
ISO 4674-2:1998
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 2: Ballistic pendulum method |
EN ISO 20345:2011
|
Personal protective equipment - Safety footwear (ISO 20345:2011) |
EN 50321:1999
|
Electrically insulating footwear for working on low voltage installations |
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ENV 13005 : DRAFT 1999
|
GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
EN ISO 15025:2016
|
Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
EN 13287:2004
|
Personal protective equipment - Footwear - Test method for slip resistance |
EN ISO 3758:2012
|
Textiles - Care labelling code using symbols (ISO 3758:2012) |
ISO 3376:2011
|
Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
ISO 34-2:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
ISO 4674-1:2016
|
Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
EN ISO 6942:2002
|
Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
EN 13832-2:2006
|
Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
ISO 3377-1:2011
|
Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |