EN 12953-9:2007
|
Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories |
EN 676:2003+A2:2008/AC:2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
EN ISO 15609-5:2011
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding (ISO 15609-5:2011, Corrected version 2011-12-01) |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
EN 746-1:1997+A1:2009
|
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV
|
Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 10305-5:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 9606-4:1999
|
Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys |
EN ISO 15614-11:2002
|
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
EN 1254-4:1998/AC:1999
|
COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS |
ISO 9606-2:2004
|
Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
ISO 9330-5:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties |
EN 746-2:2010
|
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
EN 1088:1995+A2:2008
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
EN 12953-6:2011
|
Shell Boilers - Part 6: Requirements for equipment for the boiler |
ISO 15614-11:2002
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding |
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
ISO 9606-5:2000
|
Approval testing of welders — Fusion welding — Part 5: Titanium and titanium alloys, zirconium and zirconium alloys |
ISO 1129:1980
|
Steel tubes for boilers, superheaters and heat exchangers Dimensions, tolerances and conventional masses per unit length |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
EN ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004) |
EN 10305-6:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
EN 1092-3:2003/AC:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES |
ISO 9329-1:1989
|
Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steels with specified room temperature properties |
EN ISO 15609-2:2001/A1:2003
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 2: GAS WELDING |
ISO 3183:2012
|
Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
EN ISO 9606-4:1999
|
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
EN 1050 : 1996
|
SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
ISO 15609-3:2004
|
Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 3: Electron beam welding |
ISO 8217:2017
|
Petroleum products Fuels (class F) Specifications of marine fuels |
EN 12952-7:2012
|
Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for the boiler |
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
EN 746-8 : 2000
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 8: PARTICULAR SAFETY REQUIREMENTS FOR QUENCHING EQUIPMENT |
EN ISO 1127:1996
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
EN 1044 : 1999
|
BRAZING - FILLER METALS |
ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
EN 1854:2010
|
Pressure sensing devices for gas burners and gas burning appliances |
EN ISO 228-1:2003
|
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
EN 746-4 : 2000
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT |
EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
ISO 9330-2:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
ISO 9330-3:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties |
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
ISO 9330-4:2000
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties |
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
ISO 23552-1:2007
|
Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD |
EN 746-3:1997+A1:2009
|
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 9330-1:1990
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 1: Unalloyed steel tubes with specified room temperature properties |
EN ISO 9606-2:2004
|
Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
ISO 15614-7:2016
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 7: Overlay welding |
EN ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2017) |
EN 230:2005
|
Automatic burner control systems for oil burners |
EN 60335-2-102:2016
|
Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN 10204:2004
|
Metallic products - Types of inspection documents |
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
EN ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
EN 746-5 : 2000
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 5: PARTICULAR SAFETY REQUIREMENTS FOR SALT BATH THERMOPROCESSING EQUIPMENT |
ISO 6806:2017
|
Rubber hoses and hose assemblies for use in oil burners — Specification |
ISO 15609-2:2001
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 2: Gas welding |
EN 50156-1:2015
|
Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
EN ISO 9606-5:2000
|
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
ISO 15609-5:2011
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
EN 12952-11:2007
|
Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting devices of the boiler and accessories |
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
ISO 9330-6:1997
|
Welded steel tubes for pressure purposes — Technical delivery conditions — Part 6: Longitudinally welded austenitic stainless steel tubes |
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
IEC 61310-1:2007
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
PREN 746-7 : DRAFT 1994
|
INDUSTRIAL THERMOPROCESSING EQUIPMENT - SPECIAL SAFETY REQUIREMENTS FOR VACCUUM THERMOPROCESSING EQUIPMENT |
EN ISO 15609-4:2009
|
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009) |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN ISO 15609-3:2004
|
Specification and qualification of welding procedures for metallic materials - Welding procedures specification - Part 3: Electron beam welding (ISO 15609-3:2004) |
1998/37/EC : 1998
|
DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
EN 10220:2002
|
Seamless and welded steel tubes - Dimensions and masses per unit length |
EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
EN 15035:2006
|
Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 61310-1:2008
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
ISO 15609-4:2009
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
EN 15036-1:2006
|
Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators |
EN ISO 9606-3 : 1999
|
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
EN 60730-1:2016
|
Automatic electrical controls - Part 1: General requirements |
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
ISO 9606-3:1999
|
Approval testing of welders — Fusion welding — Part 3: Copper and copper alloys |
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements |
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels |