EN 60352-2:2006/A1:2013
|
SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
ISO 3744:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
HD 366 : 200S1
|
CLASSIFICATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO PROTECTION AGAINST ELECTRIC SHOCK |
HD 448 : 200S4
|
COMMON CLAUSES FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 60227-3:1993+AMD1:1997 CSV
|
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring |
IEC 60068-2-11:1981
|
Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
ISO 3740:2000
|
Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
EN 61010-2-031:1994
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR HAND HELD PROBE ASSEMBLIES FOR ELECTRICAL MEASUREMENT AND TEST |
HD 213 : 200S1
|
|
IEC 60096-0-1:2012+AMD1:2017 CSV
|
Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables |
HD 588.1 : S1 AMD 1
|
HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
Q C 001005 : 1995
|
REGISTER OF FIRMS, PRODUCTS AND SERVICES APPROVED UNDER THE IECQ SYSTEM, INCLUDING ISO 900 |
IEC 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
EN 60352-5:2012/AC:2014
|
SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012) |
HD 323.2.3 : 200S2
|
BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE |
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
IEC 60068-2-3:1969
|
Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
EN ISO 3746:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN ISO 3744:2010
|
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
IEC 60352-5:2012
|
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
EN 60068-2-6:2008
|
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
EN 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
EN 60068-2-11:1999
|
Environmental testing - Part 2: Tests - Test Ka: Salt mist |
EN 60384-1:2016
|
Fixed capacitors for use in electronic equipment - Part 1: Generic specification |
EN 60651:1994/A2:2001
|
SOUND LEVEL METERS (IEC 60651:1979/A2:2000) |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements |
ISO 3745:2012
|
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
IEC 61010-2-031:1993
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test |
IEC 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
EN 60068-2-63 : 1994
|
ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER |
EN 60068-2-14:2009
|
Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60651:1979+AMD1:1993+AMD2:2000 CSV
|
Sound level meters |