ISO 13855:2010
|
Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
ISO 11202:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
ISO 7010:2011
|
Graphical symbols Safety colours and safety signs Registered safety signs |
IEC 61000-6-4:2006+AMD1:2010 CSV
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
EN 1037:1995+A1:2008
|
Safety of machinery - Prevention of unexpected start-up |
EN 12198-2:2002+A1:2008
|
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure |
ISO 14122-3:2016
|
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
ISO 14122-1:2016
|
Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
EN 62311:2008
|
Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
EN 1088:1995+A2:2008
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
IEC 61310-2:2007
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
IEC 61000-6-2:2016
|
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
ISO 4413:2010
|
Hydraulic fluid power General rules and safety requirements for systems and their components |
EN 614-2:2000+A1:2008
|
Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
EN 349:1993+A1:2008
|
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISO 14118:2000
|
Safety of machinery Prevention of unexpected start-up |
EN 62226-3-1:2007/A1:2017
|
EXPOSURE TO ELECTRIC OR MAGNETIC FIELDS IN THE LOW AND INTERMEDIATE FREQUENCY RANGE - METHODS FOR CALCULATING THE CURRENT DENSITY AND INTERNAL ELECTRIC FIELD INDUCED IN THE HUMAN BODY - PART 3-1: EXPOSURE TO ELECTRIC FIELDS - ANALYTICAL AND 2D NUMERICAL MODELS (IEC 62226-3-1:2007/A1:2016) |
EN 614-1:2006+A1:2009
|
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
ISO 4817:1984
|
Household sewing machines Determination of directional stability (drift) |
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO/TR 14121-2:2012
|
Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
IEC 61558-1:2017
|
Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
ISO 3746:2010
|
Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
ISO 13849-2:2012
|
Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
EN 62226-2-1:2005
|
Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 2-1: Exposure to magnetic fields - 2D models |
IEC 61000-6-4:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
EN 12198-3:2002+A1:2008
|
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
EN 62226-1:2005
|
Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General |
EN 12198-1:2000+A1:2008
|
Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
ISO 4414:2010
|
Pneumatic fluid power General rules and safety requirements for systems and their components |
CISPR 11:2015 RLV
|
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design |
IEC 61310-1:2007
|
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
EN 626-1:1994+A1:2008
|
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
ISO 2806:1994
|
Industrial automation systems — Numerical control of machines — Vocabulary |
SAC GB 13567 : 1998
|
ELECTRO-DISCHARGE MACHINES - TECHNICAL REQUIREMENTS FOR SAFEGUARDING |
ISO 14122-2:2016
|
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
EN 54-1:2011
|
Fire detection and fire alarm systems - Part 1: Introduction |
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
EN 2:1992/A1:2004
|
CLASSIFICATION OF FIRES |
IEC 61800-5-2:2016
|
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |