EN 10208-2:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
EN 13480-2:2017
|
Metallic industrial piping - Part 2: Materials |
ISO 7005-2:1988
|
Metallic flanges — Part 2: Cast iron flanges |
NFPA 31 : 2016
|
INSTALLATION OF OIL-BURNING EQUIPMENT |
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
ASME B31.1 : 2016
|
POWER PIPING |
IEC 61511-1:2016+AMD1:2017 CSV
|
Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
NFPA 79 : 2015
|
ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
ISO 23551-4:2005
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
ISO 13577-2:2014
|
Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
EN 751-2:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
ASME B31.3:2016
|
PROCESS PIPING |
IEC 60730-2-6:2015
|
Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
EN 88-2:2007
|
Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar |
EN 161:2011+A3:2013
|
Automatic shut-off valves for gas burners and gas appliances |
ASME B16.20 : 2012
|
METALLIC GASKETS FOR PIPE FLANGES |
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ISO 13574:2015
|
Industrial furnaces and associated processing equipment — Vocabulary |
ISO 8434-2:2007
|
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors |
ASME B1.20.1 : 2013(R2018)
|
PIPE THREADS, GENERAL PURPOSE (INCH) |
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
NFPA 55 : 2016
|
COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
IEC 61511-3:2016
|
Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
NFPA 86 : 2015
|
OVENS AND FURNACES |
ISO 8434-3:2005
|
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors |
ISO 19879:2010
|
Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
ISO 23551-1:2012
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
ISO 23551-2:2006
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 2: Pressure regulators |
NFPA 70 : 2017
|
NATIONAL ELECTRICAL CODE |
EN 334:2005+A1:2009
|
Gas pressure regulators for inlet pressures up to 100 bar |
EN 10241:2000
|
Steel threaded pipe fittings |
IEC 61511-2:2016
|
Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016 |
ISO 22968:2010
|
Forced draught oil burners |
IEC 60730-2-5:2013+AMD1:2017 CSV
|
Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
EN 751-1:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
ASME B16.21 : 2016
|
NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
ISO 13577-1:2016
|
Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
EN 14382:2005+A1:2009/AC:2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
NFPA 54 : 2018
|
NATIONAL FUEL GAS CODE |
IEC 61508-1:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV
|
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
EN 331:2015
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
EN 10208-1:2009
|
Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
EN 10242:1994/A2:2003
|
THREADED PIPE FITTING IN MALLEABLE CAST IRON |
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
EN 88-1:2011+A1:2016
|
Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
ISO 13577-4:2014
|
Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems |
EN 10255:2004+A1:2007
|
Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
ISO 22967:2010
|
Forced draught gas burners |