• BS ISO 15176:2002

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Soil quality. Characterization of excavated soil and other soil materials intended for re-use

    Available format(s):  Hardcopy, PDF

    Superseded date:  06-06-2019

    Language(s):  English

    Published date:  23-10-2002

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
       3.1 Types of soil and other soil materials
       3.2 Soil characteristics
       3.3 Land and sites
       3.4 Utilization, reclamation and treatment
       3.5 Assessment
    4 Characterization of soil materials and sites
       4.1 General
       4.2 Investigation strategies
       4.3 Sampling strategies
       4.4 Characterization of soil materials
    5 Data quality, handling and evaluation
    6 Using this International Standard
    Annex A (informative) Data quality, handling and evaluation
    Annex B (informative) Good practice in the re-use of soil
            materials
            B.1 General
            B.2 General guidance for re-use
            B.3 Handling and storing excavated soil and other soil
                 materials
            B.4 Placement at the target site
            B.5 After-care of the target site
            B.6 Use of soil materials in construction works
    Annex C (informative) Guidance on determination of the
            scope of investigation needed before excavation
            of soil materials
            C.1 General
            C.2 Determining the need for investigation
            C.3 Development of analytical strategies
    Annex D (informative) Example of classification and evaluation
            of soils and other soil materials
            D.1 General
            D.2 The concept of suitability classes
            D.3 Suitability classes depending on harmful substances
                 content
            D.4 Soil unsuitable for re-use
            D.5 Additional suitability classes for soil
                 improvement and reclamation
            D.6 Suitability of soils and soil materials for
                 combining
    Annex E (informative) Examples of elements and compounds
            belonging to different contaminant groups
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines guidance on the range of tests that may be necessary to characterize soil materials intended to be excavated and re-used with, or without, preliminary treatment.

    General Product Information - (Show below) - (Hide below)

    Committee EH/4
    Development Note Supersedes 00/561891 DC (11/2002)
    Document Type Standard
    Publisher British Standards Institution
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    10/30205348 DC : 0 BS 10175 - INVESTIGATION OF POTENTIALLY CONTAMINATED SITES - CODE OF PRACTICE
    14/30268442 DC : 0 BS 5930 - CODE OF PRACTICE FOR GROUND INVESTIGATIONS
    BS 5930:2015+A1:2020 Code of practice for ground investigations
    BS 10175(2011) : 2011 INVESTIGATION OF POTENTIALLY CONTAMINATED SITES - CODE OF PRACTICE
    BS 5930:2015 Code of practice for ground investigations

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 11268-3:2014 Soil quality Effects of pollutants on earthworms Part 3: Guidance on the determination of effects in field situations
    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 14254:2001 Soil quality Determination of exchangeable acidity in barium chloride extracts
    ISO 16072:2002 Soil quality Laboratory methods for determination of microbial soil respiration
    ISO 11466:1995 Soil quality — Extraction of trace elements soluble in aqua regia
    ISO 11259:1998 Soil quality Simplified soil description
    ISO 15009:2016 Soil quality Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons Purge-and-trap method with thermal desorption
    ISO 10381-1:2002 Soil quality Sampling Part 1: Guidance on the design of sampling programmes
    ISO 11272:2017 Soil quality — Determination of dry bulk density
    ISO 10381-3:2001 Soil quality Sampling Part 3: Guidance on safety
    ISO 10693:1995 Soil quality Determination of carbonate content Volumetric method
    ISO 11269-2:2012 Soil quality — Determination of the effects of pollutants on soil flora — Part 2: Effects of contaminated soil on the emergence and early growth of higher plants
    ISO 11264:2005 Soil quality Determination of herbicides Method using HPLC with UV-detection
    ISO 14688-1:2002 Geotechnical investigation and testing Identification and classification of soil Part 1: Identification and description
    ISO 14255:1998 Soil quality Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant
    ISO 11271:2002 Soil quality — Determination of redox potential — Field method
    ISO 10381-6:2009 Soil quality Sampling Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory
    ISO 14240-1:1997 Soil quality Determination of soil microbial biomass Part 1: Substrate-induced respiration method
    ISO 13877:1998 Soil quality Determination of polynuclear aromatic hydrocarbons Method using high -performance liquid chromatography
    ISO 14240-2:1997 Soil quality Determination of soil microbial biomass Part 2: Fumigation-extraction method
    ISO 11464:2006 Soil quality Pretreatment of samples for physico-chemical analysis
    ISO 11074-1:1996 Soil quality — Vocabulary — Part 1: Terms and definitions relating to the protection and pollution of the soil
    ISO 5667-4:2016 Water quality Sampling Part 4: Guidance on sampling from lakes, natural and man-made
    EN 45002:1989 GENERAL CRITERIA FOR THE ASSESSMENT OF TESTING LABORATORIES
    ISO 11276:1995 Soil quality — Determination of pore water pressure — Tensiometer method
    ISO 10381-2:2002 Soil quality Sampling Part 2: Guidance on sampling techniques
    ISO 11267:2014 Soil quality — Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants
    ISO 11277:2009 Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation
    ISO 5667-6:2014 Water quality Sampling Part 6: Guidance on sampling of rivers and streams
    ISO 17155:2012 Soil quality — Determination of abundance and activity of soil microflora using respiration curves
    ISO 14256-2:2005 Soil quality Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution Part 2: Automated method with segmented flow analysis
    ISO 10381-5:2005 Soil quality Sampling Part 5: Guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination
    ISO 14238:2012 Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
    ISO 11047:1998 Soil quality Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc Flame and electrothermal atomic absorption spectrometric methods
    EN 45002:1989 GENERAL CRITERIA FOR THE ASSESSMENT OF TESTING LABORATORIES
    ISO 11461:2001 Soil quality — Determination of soil water content as a volume fraction using coring sleeves — Gravimetric method
    ISO 10382:2002 Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection
    ISO 10381-7:2005 Soil quality Sampling Part 7: Guidance on sampling of soil gas
    ISO 11074-4:1999 Soil quality - Vocabulary Part 4: Terms and definitions related to rehabilitation of soils and sites
    ISO 11261:1995 Soil quality — Determination of total nitrogen — Modified Kjeldahl method
    ISO 11275:2004 Soil quality Determination of unsaturated hydraulic conductivity and water-retention characteristic Wind's evaporation method
    ISO 14869-1:2001 Soil quality — Dissolution for the determination of total element content — Part 1: Dissolution with hydrofluoric and perchloric acids
    ISO 13536:1995 Soil quality — Determination of the potential cation exchange capacity and exchangeable cations using barium chloride solution buffered at pH = 8,1
    ISO 15799:2003 Soil quality Guidance on the ecotoxicological characterization of soils and soil materials
    ISO 14869-2:2002 Soil quality Dissolution for the determination of total element content Part 2: Dissolution by alkaline fusion
    ISO 13878:1998 Soil quality Determination of total nitrogen content by dry combustion ("elemental analysis")
    ISO 11269-1:2012 Soil quality — Determination of the effects of pollutants on soil flora — Part 1: Method for the measurement of inhibition of root growth
    ISO/TR 11046:1994 Soil quality Determination of mineral oil content Method by infrared spectrometry and gas chromatographic method
    ISO 15800:2003 Soil quality Characterization of soil with respect to human exposure
    ISO 15178:2000 Soil quality Determination of total sulfur by dry combustion
    BS 3882:1994 Specification for topsoil
    ISO 14507:2003 Soil quality Pretreatment of samples for determination of organic contaminants
    ISO 11268-2:2012 Soil quality — Effects of pollutants on earthworms — Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei
    ISO 11274:1998 Soil quality Determination of the water-retention characteristic Laboratory methods
    ISO 10390:2005 Soil quality Determination of pH
    ISO 10694:1995 Soil quality Determination of organic and total carbon after dry combustion (elementary analysis)
    ISO 14235:1998 Soil quality Determination of organic carbon by sulfochromic oxidation
    ISO 11266:1994 Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions
    ISO 5667-12:2017 Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas
    ISO 10573:1995 Soil quality — Determination of water content in the unsaturated zone — Neutron depth probe method
    ISO 5667-11:2009 Water quality Sampling Part 11: Guidance on sampling of groundwaters
    ISO 11048:1995 Soil quality Determination of water-soluble and acid-soluble sulfate
    ISO 14154:2005 Soil quality — Determination of some selected chlorophenols — Gas-chromatographic method with electron-capture detection
    ISO 11508:2017 Soil quality — Determination of particle density
    ISO 11263:1994 Soil quality — Determination of phosphorus — Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
    ISO 10381-4:2003 Soil quality Sampling Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites
    ISO 11268-1:2012 Soil quality — Effects of pollutants on earthworms — Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei
    ISO 11260:1994 Soil quality Determination of effective cation exchange capacity and base saturation level using barium chloride solution
    ISO 15473:2002 Soil quality Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions
    ISO 10381-8:2006 Soil quality Sampling Part 8: Guidance on sampling of stockpiles
    ISO 14870:2001 Soil quality — Extraction of trace elements by buffered DTPA solution
    ISO 15175:2004 Soil quality Characterization of soil related to groundwater protection
    ISO 14239:2017 Soil quality — Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective