Skip to content
Please enter a keyword to search

  • BS ISO 20297-1:2017

    Current The latest, up-to-date edition.

    Industrial trucks. Lorry-mounted trucks Safety requirements and verification

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  11-01-2018

    Publisher:  British Standards Institution

    Add To Cart

    Scope - (Show below) - (Hide below)

    This document specifies safety requirements and their verification for industrial and rough-terrain lorry‑mounted trucks (hereafter referred to as “trucks??).

    It is applicable to those trucks capable of self-loading onto a carrier vehicle. It is not applicable to

    • trucks that are driven onto the carrier vehicle, or

    • trucks that are loaded onto the carrier vehicle with the assistance of external means, i.e. crane or other lifting device.

    This document deals with all significant hazards, hazardous situations or hazardous events relevant to machinery, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. The significant hazards covered by this document are listed in AnnexA.

    This document does not address hazards which can occur

    • during manufacture,

    • when handling suspended loads, which may swing freely,

    • when using trucks on public roads,

    • when operating in potentially explosive atmospheres,

    • with a battery or hybrid as the primary power source.

    It does not address the requirements of road safety when the truck is mounted on the carrier vehicle.

    It is not applicable to trucks manufactured before the date of its publication.

    General Product Information - (Show below) - (Hide below)

    Committee MHE/7
    Development Note Supersedes 16/30333438 DC. (01/2018)
    Document Type Standard
    Publisher British Standards Institution
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
    ISO 10532:1995 Earth-moving machinery Machine-mounted retrieval device Performance requirements
    ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
    ISO 10263-5:2009 Earth-moving machinery Operator enclosure environment Part 5: Windscreen defrosting system test method
    ISO/TS 3691-8:2012 Industrial trucks Safety requirements and verification Part 8: Regional requirements for countries outside the European Community
    ISO 11525-1:2012 Rough-terrain trucks - User requirements Part 1: General requirements
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    ISO 15817:2012 Earth-moving machinery — Safety requirements for remote operator control systems
    ISO 3691-2:2016 Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks
    ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
    ISO 6683:2005 Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests
    ISO 6405-2:2017 Earth-moving machinery Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories
    ISO 22915-20:2008 Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
    ISO 12508:1994 Earth-moving machinery Operator station and maintenance areas Bluntness of edges
    ISO 13564-1:2012 Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
    ISO 3691-1:2011 Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
    ISO 22915-10:2008 Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
    ISO 22915-3:2014 Industrial trucks Verification of stability Part 3: Reach and straddle trucks
    ISO 5010:2007 Earth-moving machinery Rubber-tyred machines Steering requirements
    ISO 21507:2010 Earth-moving machinery Performance requirements for non-metallic fuel tanks
    ISO 12509:2004 Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices
    ISO 10896-1:2012 Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks
    ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
    ISO 22915-14:2010 Industrial trucks Verification of stability Part 14: Rough-terrain variable-reach trucks
    ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
    ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
    ISO 10263-3:2009 Earth-moving machinery Operator enclosure environment Part 3: Pressurization test method
    ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
    ISO 15818:2017 Earth-moving machinery Lifting and tying-down attachment points Performance requirements
    ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
    ISO 3287:1999 Powered industrial trucks — Symbols for operator controls and other displays
    ISO 15870:2000 Powered industrial trucks — Safety signs and hazard pictorials — General principles
    ISO 2331:1974 Fork lift trucks Hook-on type fork arms Vocabulary
    ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    ISO 2328:2011 Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions
    ISO 21281:2005 Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals
    ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
    ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
    ISO 22915-7:2016 Industrial trucks Verification of stability Part 7: Bidirectional and multidirectional trucks
    ISO 6292:2008 Powered industrial trucks and tractors Brake performance and component strength
    ISO 10263-4:2009 Earth-moving machinery Operator enclosure environment Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
    ISO 2330:2002 Fork-lift trucks — Fork arms — Technical characteristics and testing
    IEC 61310-1:2007 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    ISO/TS 3691-7:2011 Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community
    ISO 2867:2011 Earth-moving machinery Access systems
    ISO 9533:2010 Earth-moving machinery Machine-mounted audible travel alarms and forward horns Test methods and performance criteria
    ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    ISO 22915-13:2012 Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast
    ISO 10968:2004 Earth-moving machinery Operator's controls
    ISO 5053-1:2015 Industrial trucks Terminology and classification Part 1: Types of industrial trucks
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective