Skip to content
Please enter a keyword to search

  • BS ISO 3977-3:2004

    Current The latest, up-to-date edition.

    Gas turbines. Procurement Design requirements

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  31-07-2008

    Publisher:  British Standards Institution

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Basic requirements
      4.1 General
      4.2 Site-specific conditions
      4.3 Operational requirements
      4.4 Service requirements
      4.5 Rotating equipment requirements
      4.6 Other equipment requirements
      4.7 Vibrations and dynamics
    5 Packaging and auxiliary equipment
      5.1 Basic design
      5.2 Auxiliary equipment
    6 Control and instrumentation
      6.1 Control systems
      6.2 Starting
      6.3 Loading
      6.4 Unloading and shutdown
      6.5 Ventilation and purging
      6.6 Fuel control
      6.7 Governing and limiting
      6.8 Emission control
      6.9 Overspeed protection
      6.10 Protection systems
      6.11 Compressor wash system
      6.12 Control system considerations
      6.13 Control panel installation
      6.14 Operability and diagnostics
      6.15 Data communications
      6.16 Special applications
    Annex A (informative) - Data sheets
    Annex B (informative) - List of national or International
            Standards applicable in context
    Bibliography

    Abstract - (Show below) - (Hide below)

    Provides the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager.

    Scope - (Show below) - (Hide below)

    This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.

    It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.

    This part of ISO 3977 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.

    In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), this part of ISO 3977 provides a basis.

    The relevant parts of ISO 3977 are applicable to closed and semi-closed systems.

    NOTE Additional requirements for special gas turbine applications are described in ISO 3977-5.

    General Product Information - (Show below) - (Hide below)

    Committee MCE/16
    Development Note Issue date: 31/07/2008. Supersedes 03/314833 DC. (08/2008)
    Document Type Standard
    Publisher British Standards Institution
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 10816-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings
    DIN 2547:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 100
    ISO 3977-4:2002 Gas turbines — Procurement — Part 4: Fuels and environment
    ISO 15649:2001 Petroleum and natural gas industries — Piping
    BS 4807:1991 Recommendation for centralized lubrication systems
    ISO 3977-2:1997 Gas turbines — Procurement — Part 2: Standard reference conditions and ratings
    ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
    API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    ASME B31.1 : 2016 POWER PIPING
    ISO 7919-4:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings
    ASME PV CODE 9 : 2017 BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS
    ISO 3977-1:1997 Gas turbines — Procurement — Part 1: General introduction and definitions
    ISO 3977-7:2002 Gas turbines Procurement Part 7: Technical information
    ISO 10816-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    ISO 11086:1996 Gas turbines — Vocabulary
    ISO 7919-2:2009 Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    ISO 10814:1996 Mechanical vibration Susceptibility and sensitivity of machines to unbalance
    NFE 29 204 : 2008 INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS
    API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
    ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
    ASME B16.11 : 2016 FORGED FITTINGS, SOCKET-WELDING AND THREADED
    DIN 2551:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 400
    ISO 3977-9:1999 Gas turbines Procurement Part 9: Reliability, availability, maintainability and safety
    ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
    NFE 29 600 : 1987 INDUSTRIAL PIPEWORK - STEEL FITTINGS AND PLUGS - SOCKET WELDING FITTINGS
    ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
    ISO 3977-5:2001 Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries
    DIN 2545:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 40
    DIN 2550:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 320
    DIN 24425:1991-07 (Draft) OIL (SUPPLY) SYSTEMS - DESCRIPTION, SELECTION, REQUIREMENTS CLASSES
    NFE 29 203 : 1989 INDUSTRIAL PIPEWORK - CARBON, ALLOY AND AUSTENITIC STAINLESS STEEL FLANGES AND FLANGED FITTINGS - TERMINOLOGY - DIMENSIONS
    ASME B1.20.1 : 2013(R2018) PIPE THREADS, GENERAL PURPOSE (INCH)
    ISO 11042-1:1996 Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation
    ISO 11042-2:1996 Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring
    ISO 3977-8:2002 Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning
    ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
    ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
    BS 1600:1991 Specification for dimensions of steel pipe for the petroleum industry
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    DIN 2543:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 16
    BS EN 288-3:1992 Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    ASME B16.5 : 2017 PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
    ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
    DIN 2546:1969-11 CAST STEEL FLANGES - NOMINAL PRESSURE 64
    DIN 2549:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 250
    ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries
    ISO 10438-4:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems
    ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
    ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
    DIN 2548:1969-04 CAST STEEL FLANGES, NOMINAL PRESSURE 160
    ISO 1940-2:1997 Mechanical vibration Balance quality requirements of rigid rotors Part 2: Balance errors
    BS 4504-3.3:1989 Circular flanges for pipes, valves and fittings (PN designated) Specification for copper alloy and composite flanges
    ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    ISO 10494:1993 Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
    AGMA 420 : LATEST PRACTICE FOR ENCLOSED SPEED REDUCERS OR INCREASERS USING SPUR, HELICAL, HERRINGBONE AND SPIRAL BEVEL GEARS
    ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems
    DIN 2544:1977-09 CAST STEEL FLANGES - NOMINAL PRESSURE 25
    ISO 10439:2002 Petroleum, chemical and gas service industries Centrifugal compressors
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective