EN 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included) |
IEC 60364-5-54:2011
|
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
EN 60352-2:2006/A1:2013
|
SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
IEC 60352-3:1993
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
IEC 60947-7-2:2009
|
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
EN 60216-1:2013
|
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
IEC 60228:2004
|
Conductors of insulated cables |
EN 60998-2-2:2004
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
IEC 61310-2:2007
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
EN 60684-3-271:2011
|
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 |
DIN 46235:1983-07
|
CABLE LUGS, FOR COMPRESSION CONNECTIONS, COVER PLATE TYPE, FOR COPPER CONDUCTORS |
IEC 60998-2-3:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
EN 50121-3-2:2016
|
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
EN 61310-2:2008
|
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
EN 60352-3:1994
|
Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
NFF 61 030 : 1992
|
RAILWAY ROLLING STOCK - ELECTRICAL CONNECTORS - GENERALITIES |
EN ISO 1302 : 2002
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002) |
EN 50200:2015
|
Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
IEC 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
IEC 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
HD 60364-5-54:2011/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS |
EN 60352-6:1997
|
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
EN 50153 : 2014 AMD 1 2017
|
RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
IEC 60909-0:2016
|
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
EN 45545-1 : 2013 COR 2013
|
RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
NFF 61 014 : 1998
|
RAILWAY ROLLING STOCK - ELECTRICAL CONNECTING OF BRAIDED WIRE AND SHIELDED CABLE |
EN 60228:2005 COR 2005
|
CONDUCTORS OF INSULATED CABLES |
IEC 60947-7-1:2009
|
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
EN 60947-1:2007/A2:2014
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
IEC 60512-16-4:2008
|
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) |
EN 50215:2009
|
Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
IEC 60999-1:1999
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
EN 50553 : 2012 AMD 1 2016
|
RAILWAY APPLICATIONS - REQUIREMENTS FOR RUNNING CAPABILITY IN CASE OF FIRE ON BOARD OF ROLLING STOCK |
EN 60512-16-4:2008
|
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) |
EN 61386-1:2008
|
Conduit systems for cable management - Part 1: General requirements |
IEC 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
EN 50124-1:2017
|
Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
EN 60352-5:2012/AC:2014
|
SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012) |
EN 50125-1:2014
|
Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
ISO 1302:2002
|
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
IEC 60998-2-2:2002
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 60684-3-212:2005
|
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
IEC 60352-5:2012
|
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
EN 50362:2003
|
Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
EN 60909-0:2016
|
Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents |
EN 50121-3-1:2017
|
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle |
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV
|
Low-voltage switchgear and controlgear - Part 1: General rules |
EN 45545-3:2013
|
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers |
DIN 41611-4:1986-04
|
SOLDERLESS ELECTRICAL CONNECTIONS; CLIP CONNECTIONS; TERMINOLOGY, REQUIREMENTS, TESTING |
IEC 60423:2007
|
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
EN 45545-2:2013+A1:2015
|
Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
IEC 60050-461:2008
|
International Electrotechnical Vocabulary (IEV) - Part 461: Electric cables |
IEC 60684-3-216:2001+AMD1:2005+AMD2:2013 CSV
|
Flexible insulating sleeving - Part 3: Specifications for individualtypes of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving |
EN 50306-2:2002
|
Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables |
IEC 60352-2:2006+AMD1:2013 CSV
|
Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
NFF 00 363 : 1995
|
RAILWAY MATERIAL IN GENERAL - CRIMPABLE PRODUCTS FOR ELECTRICAL CONNECTIONS - BARE OR INSULATED LUGS AND SPLICES - INSULATED TERMINAL ENDS - INSULATED CLIPS |
EN 61210:2010
|
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
IEC 60684-3-271:2011
|
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 |
EN 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
EN 60999-1:2000
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
EN 60352-4:1994/A1:2000
|
SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
IEC 61386-1:2008+AMD1:2017 CSV
|
Conduit systems for cable management - Part 1: General requirements |
EN 50355:2013
|
Railway applications - Railway rolling stock cables having special fire performance - Guide to use |
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
EN 60352-7:2002
|
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
CEI 23-26 : 1ED 1988
|
DIAMETRI ESTERNI DEI TUBI PER INSTALLAZIONI ELETTRICHE E FILETTATURE PER TUBI E ACCESSORI |
EN 50467 : 2011
|
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
EN 60947-7-1:2009
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS |
EN 45545-5:2013+A1:2015
|
Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
CEI 9-15 : 1ED 1998
|
|
EN 60684-3-216:2005/A2:2014
|
FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE HAZARD SLEEVING (IEC 60684-3-216:2001 + CORRIGENDUM 2003 + A1:2005) |
IEC 60216-1:2013
|
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results |
CEI 20-29 : 2ED 1997
|
|
EN 61180-1:1994
|
High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements |
IEC 60352-7:2002
|
Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
EN 60684-3-212:2006/corrigendum:2006
|
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
EN 60423:2007
|
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
EN 60947-7-2:2009
|
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |