Skip to content
Please enter a keyword to search

  • CEI EN 60092-507 : 2016

    Current The latest, up-to-date edition.

    ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2016

    Publisher:  Comitato Elettrotecnico Italiano

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General requirements
    5 Distribution systems
    6 Protection against electric shock in AC and DC systems
       with voltage exceeding safety voltage
    7 Protection against over-current and fault-current in AC
       and DC systems
    8 Diversity (demand) factor
    9 Cables
    10 Cable installation, conductor terminations and
       identification
    11 Earthing
    12 Lightning protection
    13 Testing
    14 Vessels over 24 m in length up to 50 m/500 GT
    Annex A (informative) - Shore-side power supply arrangements
    Annex B (informative) - Diode type galvanic isolator
    Bibliography
    Annex ZA (normative) - Normative references to international
             publications with their corresponding European
             publications
    Annex ZZ (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 94/25/EC as amended by Directive
             2003/44/EC

    Abstract - (Show below) - (Hide below)

    Defines requirements for the design, construction and installation of electrical systems in small vessels, which have a length of up to 50 m, or which have a gross tonnage not exceeding 500 Gross Tonnes (GT), designed for use on inland waters or at sea.

    General Product Information - (Show below) - (Hide below)

    Committee CT 18
    Development Note Classificazione CEI 18-56 (08/2001)
    Document Type Standard
    Publisher Comitato Elettrotecnico Italiano
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    CEI 64-8/7 : 2012 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 10239:2014 Small craft Liquefied petroleum gas (LPG) systems
    EN ISO 9094-1:2003 Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003)
    ISO 9094-1:2003 Small craft Fire protection Part 1: Craft with a hull length of up to and including 15 m
    IEC 60092-306:2009 Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories
    EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
    HD 60364-7-709:2009/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS
    ISO 9094-2:2002 Small craft Fire protection Part 2: Craft with a hull length of over 15 m
    IEC 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
    IEC 60092-501:2013 Electrical installations in ships - Part 501: Special features - Electric propulsion plant
    IEC 60092-352:2005 Electrical installations in ships - Part 352: Choice and installation of electrical cables
    EN 28846:1993/A1:2000 SMALL CRAFT - ELECTRICAL DEVICES - PROTECTION AGAINST IGNITION OF SURROUNDING FLAMMABLE GASES
    IEC 60092-307:1980 Electrical installations in ships. Part 307: Equipment - Heating and cooking appliances
    IMO IF110 : 2014 SUPP 2016 SOLAS CONSOLIDATED EDITION
    IEC 60947-7-1:2009 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
    EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
    IEC 60364-7-709:2007+AMD1:2012 CSV Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
    ISO 8846:1990 Small craft — Electrical devices — Protection against ignition of surrounding flammable gases
    IEC 60245-4:2011 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
    IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
    EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
    IEC 60898-1:2015 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
    IEC 60092-301:1980 Electrical installations in ships - Part 301: Equipment - Generators and motors
    EN 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    EN 60947-2:2017 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    EN 60947-7-1:2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS
    IEC 60092-101:1994+AMD1:1995 CSV Electrical installations in ships - Part 101: Definitions and general requirements
    IEC 60092-202:2016 Electrical installations in ships - Part 202: System design - Protection
    IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
    IEC 60092-303:1980 Electrical installations in ships - Part 303: Equipment - Transformers for power and lighting
    IEC 60092-401:1980 Electrical installations in ships - Part 401: Installation and test of completed installation
    EN ISO 10239:2017 Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)
    IEC 60332-3-22:2000+AMD1:2008 CSV Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
    IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
    EN 60309-2:1999/A2:2012 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES (IEC 60309-2:1999/A2:2012)
    EN ISO 9094-2:2002 Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002)
    IEC 60092-302:1997 Electrical installations in ships - Part 302: Low-voltage switchgear and controlgear assemblies
    IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
    IMO IB904 : 2003 SUPP 2016 COLLISION REGULATIONS CONVENTION (COLREGS)
    IEC 60092-350:2014 Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
    EN 60309-1:1999/A1:2007/AC:2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999/A2:2012)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective