IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60238:2016+AMD1:2017 CSV
|
Edison screw lampholders |
IEC 60947-7-2:2009
|
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
IEC 60228:2004
|
Conductors of insulated cables |
IEC 60068-2-27:2008
|
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 61048:2006+AMD1:2015 CSV
|
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
IEC 60998-2-4:2004
|
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices |
IEC 60079-17:2013
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
IEC 61347-2-9:2012
|
Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
CSA C22.2 No. 60079-11 : 2014
|
EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I' |
IEC 60050-411:1996
|
International Electrotechnical Vocabulary (IEV) - Part 411: Rotating machinery |
CSA C22.2 No. 60079.0 : 2015
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
IEC 60999-2:2003
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
IEC 60400:2017
|
Lampholders for tubular fluorescent lamps and starterholders |
CSA C22.2 No. 60079.1 : 2016
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
IEC 60947-7-1:2009
|
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
IEC TS 60034-18-41:2006
|
Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters |
IEC 60050-426:2008
|
International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV
|
Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
IEC 61347-2-4:2000
|
Lamp controlgear - Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting |
IEC 60999-1:1999
|
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation |
CSA C22.2 No. 60529 : 2016
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
IEC TS 60034-25:2014
|
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide |
IEC 61347-2-7:2011+AMD1:2017 CSV
|
Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
IEC 60269-3:2010+AMD1:2013 CSV
|
Low-voltage fuses - Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F |
IEC TS 60034-17:2006
|
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide |
IEC 60079-29-2:2015 RLV
|
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
IEC 60061-1:2005 CSV
|
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
IEC 60034-1:2017
|
Rotating electrical machines - Part 1: Rating and performance |
IEC 61347-2-2:2011
|
Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
IEC 60927:2007+AMD1:2013 CSV
|
Auxiliaries for lamps - Starting devices (other than glow starters)- Performance requirements |
CSA E60598.1 : 2016
|
LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
IEC 60155:1993
|
Glow-starters for fluorescent lamps |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 61347-2-8:2000+AMD1:2006 CSV
|
Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
IEC 61184:2017
|
Bayonet lampholders |
IEC 61195:1999+AMD1:2012+AMD2:2014 CSV
|
Double-capped fluorescent lamps - Safety specifications |