• DIN EN 15002 E : 2015

    Current The latest, up-to-date edition.

    CHARACTERIZATION OF WASTE - PREPARATION OF TEST PORTIONS FROM THE LABORATORY SAMPLE

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  01-01-2015

    Publisher:  German Institute for Standardisation (Deutsches Institut für Normung)

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    National foreword
    National Annex NA (informative) - Bibliography
    Foreword
    Introduction
    1 Scope
    2 Terms and definitions
    3 Equipment
    4 Interferences and sources of error
    5 Procedure
    6 Report
    Annex A (normative) - Guideline for choosing sample
            treatment techniques
    Annex B (informative) - Relationship between minimum
            amount of (sub-)sample and particle size
    Annex C (informative) - Sample treatment equipment
    Annex D (informative) - Examples for analytical methods
    Annex E (informative) - Examples for preparation of
            test samples
    Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies the preparation of representative test portions from the laboratory sample that has been taken according to the sampling plan (EN 14899), prior to physical and/or chemical analysis (e.g. preparation of eluates, extractions, digestion and/or analytical determinations) of solid (including monolithic material) and liquid samples and sludge.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher German Institute for Standardisation (Deutsches Institut für Normung)
    Status Current

    Standards Referencing This Book - (Show below) - (Hide below)

    EN ISO 22155:2016 Soil quality - Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers - Static headspace method (ISO 22155:2016)
    CEN/TR 15310-2 : 2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 2: GUIDANCE ON SAMPLING TECHNIQUES
    ISO 5664:1984 Water quality — Determination of ammonium — Distillation and titration method
    DIN ISO 13877:2000-01 SOIL QUALITY - DETERMINATION OF POLYNUCLEAR AROMATIC HYDROCARBONS - METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY
    ISO 14402:1999 Water quality Determination of phenol index by flow analysis (FIA and CFA)
    EN 12457-2:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction)
    ISO 11074:2015 Soil quality — Vocabulary
    EN ISO 11885:2009 Water quality - Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885:2007)
    EN 27888 : 1993 WATER QUALITY - DETERMINATION OF ELECTRICAL CONDUCTIVITY
    ISO 11969:1996 Water quality Determination of arsenic Atomic absorption spectrometric method (hydride technique)
    EN 14997:2015 Characterization of waste - Leaching behaviour test - Influence of pH on leaching with continuous pH control
    ISO 11083:1994 Water quality — Determination of chromium(VI) — Spectrometric method using 1,5-diphenylcarbazide
    EN ISO 11732:2005 Water quality - Determination of ammonium nitrogen - Method by flow analysis (CFA and FIA) and spectrometric detection (ISO 11732:2005)
    EN ISO 10523:2012 Water quality - Determination of pH (ISO 10523:2008)
    EN ISO 12846:2012 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO 12846:2012)
    EN ISO 14403-2:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method using continuous flow analysis (CFA) (ISO 14403-2:2012)
    EN 26777 : 1993 WATER QUALITY - DETERMINATION OF NITRITE - MOLECULAR ABSORPTION SPECTROMETRIC METHOD
    ISO 10381-6:2009 Soil quality Sampling Part 6: Guidance on the collection, handling and storage of soil under aerobic conditions for the assessment of microbiological processes, biomass and diversity in the laboratory
    ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
    ISO 13877:1998 Soil quality Determination of polynuclear aromatic hydrocarbons Method using high -performance liquid chromatography
    ISO 11464:2006 Soil quality Pretreatment of samples for physico-chemical analysis
    ISO 14403-2:2012 Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 2: Method using continuous flow analysis (CFA)
    CEN/TR 15310-1 : 2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 1: GUIDANCE ON SELECTION AND APPLICATION OF CRITERIA FOR SAMPLING UNDER VARIOUS CONDITIONS
    EN 1484 : 1997 WATER ANALYSIS - GUIDELINES FOR THE DETERMINATION OF TOTAL ORGANIC CARBON (TOC) AND DISSOLVED ORGANIC CARBON (DOC)
    ISO 11732:2005 Water quality — Determination of ammonium nitrogen — Method by flow analysis (CFA and FIA) and spectrometric detection
    EN 13137 : 2001 CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS
    ISO 12846:2012 Water quality — Determination of mercury — Method using atomic absorption spectrometry (AAS) with and without enrichment
    EN 15308:2016 Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection
    EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
    EN 12457-4:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction)
    ISO 8288:1986 Water quality — Determination of cobalt, nickel, copper, zinc, cadmium and lead — Flame atomic absorption spectrometric methods
    ISO 5667-15:2009 Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples
    EN 14346:2006 CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT
    ISO 6777:1984 Water quality — Determination of nitrite — Molecular absorption spectrometric method
    ISO 11885:2007 Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES)
    ISO 10304-1:2007 Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate
    ISO 5667-3:2012 Water quality Sampling Part 3: Preservation and handling of water samples
    ISO 10382:2002 Soil quality — Determination of organochlorine pesticides and polychlorinated biphenyls — Gas-chromatographic method with electron capture detection
    ISO 6703-2:1984 Water quality — Determination of cyanide — Part 2: Determination of easily liberatable cyanide
    ISO 10381-7:2005 Soil quality Sampling Part 7: Guidance on sampling of soil gas
    ISO 6439:1990 Water quality — Determination of phenol index — 4-Aminoantipyrine spectrometric methods after distillation
    ISO 13395:1996 Water quality — Determination of nitrite nitrogen and nitrate nitrogen and the sum of both by flow analysis (CFA and FIA) and spectrometric detection
    CEN/TS 15864:2015 Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s)
    ISO 10359-1:1992 Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water
    ISO 14507:2003 Soil quality Pretreatment of samples for determination of organic contaminants
    ISO 22155:2016 Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method
    EN 12457-1:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
    EN 15192:2006 Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection
    EN ISO 11074:2015 Soil quality - Vocabulary (ISO 11074:2015)
    EN 16192:2011 Characterization of waste - Analysis of eluates
    EN 15309:2007 Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence
    EN ISO 5667-3:2012 Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012)
    ISO 9562:2004 Water quality — Determination of adsorbable organically bound halogens (AOX)
    EN 15169:2007 Characterization of waste - Determination of loss on ignition in waste, sludge and sediments
    EN 13656 : 2002 CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS
    EN 14345 : 2004 CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT BY GRAVIMETRY
    EN 12457-3:2002 Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction)
    EN 14039 : 2004 CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT IN THE RANGE OF C[10] TO C[40] BY GAS CHROMATOGRAPHY
    EN 13657:2002 Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
    EN 15863:2015 Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions
    EN ISO 9562:2004 Water quality - Determination of adsorbable organically bound halogens (AOX) (ISO 9562:2004)
    EN ISO 5667-15:2009 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009)
    DIN ISO 10382 E : 2003 SOIL QUALITY - DETERMINATION OF ORGANOCHLORINE PESTICIDES AND POLYCHLORINATED BIPHENYLS - GAS-CHROMATOGRAPHIC METHOD WITH ELECTRON CAPTURE DETECTION
    ISO 7150-1:1984 Water quality — Determination of ammonium — Part 1: Manual spectrometric method
    CEN/TS 14405 : 2004 CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS)
    ISO 14403-1:2012 Water quality — Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) — Part 1: Method using flow injection analysis (FIA)
    ISO 10523:2008 Water quality — Determination of pH
    EN ISO 14403-1:2012 Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method using flow injection analysis (FIA) (ISO 14403-1:2012)
    CEN/TR 15310-3 : 2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 3: GUIDANCE ON PROCEDURES FOR SUB-SAMPLING IN THE FIELD
    CEN/TS 15862:2012 Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions
    EN 14899:2005 Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan
    CEN/TR 15310-4 : 2006 CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY
    EN ISO 11969:1996 WATER QUALITY - DETERMINATION OF ARSENIC - ATOMIC ABSORPTION SPECTROMETRIC METHOD (HYDRIDE TECHNIQUE)
    EN ISO 14402 : 1999 WATER QUALITY - DETERMINATION OF PHENOL INDEX BY FLOW ANALYSIS (FIA AND CFA)
    EN ISO 10304-1:2009 Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate (ISO 10304-1:2007)
    CEN/TR 15310-5:2006 Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan
    EN ISO 13395 : 1996 WATER QUALITY - DETERMINATION OF NITRITE NITROGEN AND NITRATE NITROGEN AND THE SUM OF BOTH BY FLOW ANALYSIS (CFA AND FIA) AND SPECTROMETRIC DETECTION
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective