|
ISO 17672:2016
|
Brazing Filler metals |
|
ISO 17636-1:2013
|
Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
|
EN 1555-1:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
|
EN ISO 14021:2016
|
Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016) |
|
EN ISO 5817:2014
|
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) |
|
EN 751-3:1996/AC:1997
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
|
EN 15001-1:2009
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
|
EN 1555-3:2010+A1:2012
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
|
EN 1045:1997
|
Brazing - Fluxes for brazing - Classification and technical delivery conditions |
|
EN 1515-1:1999
|
Flanges and their joints - Bolting - Part 1: Selection of bolting |
|
EN 13175:2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
|
EN 12007-3:2015
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
|
EN 10226-2:2005
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
|
EN ISO 3452-1:2013
|
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
|
EN 10216-5:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
|
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
|
ISO 9712:2012
|
Non-destructive testing Qualification and certification of NDT personnel |
|
EN ISO 17672:2016
|
Brazing - Filler metals (ISO 17672:2016) |
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
|
ISO 9454-2:1998
|
Soft soldering fluxes Classification and requirements Part 2: Performance requirements |
|
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
|
EN 12007-1:2012
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
|
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
|
ISO 14024:1999
|
Environmental labels and declarations Type I environmental labelling Principles and procedures |
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
|
ISO 14021:2016
|
Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling) |
|
EN 751-2:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
|
EN 10217-4:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
|
ASME B31.3:2016
|
PROCESS PIPING |
|
EN 12266-2:2012
|
Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
|
ISO 9606-1:2012
|
Qualification testing of welders — Fusion welding — Part 1: Steels |
|
ISO 3183:2012
|
Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
|
ASME B31.4 : 2016
|
PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
|
EN ISO 9454-2:2000
|
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:1998) |
|
EN 10216-2:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
|
EN ISO 9712:2012
|
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) |
|
ISO 17640:2017
|
Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment |
|
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
|
ISO 3452-1:2013
|
Non-destructive testing Penetrant testing Part 1: General principles |
|
ISO 16810:2012
|
Non-destructive testing — Ultrasonic testing — General principles |
|
EN 12266-1:2012
|
Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
|
EN 10217-7:2014
|
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
|
EN ISO 16810:2014
|
Non-destructive testing - Ultrasonic testing - General principles (ISO 16810:2012) |
|
ISO 11922-1:1997
|
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
|
EN ISO 10380:2012
|
Pipework - Corrugated metal hoses and hose assemblies (ISO 10380:2012) |
|
ISO 10380:2012
|
Pipework — Corrugated metal hoses and hose assemblies |
|
EN ISO 17637:2016
|
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
|
EN ISO 17292:2015
|
METAL BALL VALVES FOR PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES (ISO 17292:2015) |
|
EN ISO 14025:2010
|
Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006) |
|
ISO/IEC 17020:2012
|
Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
|
EN 10217-2:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
|
EN 1555-4:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
|
ISO 14001:2015
|
Environmental management systems — Requirements with guidance for use |
|
EN ISO 10497:2010
|
Testing of valves - Fire type-testing requirements (ISO 10497:2010) |
|
EN 12068:1998
|
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
|
ISO 17637:2016
|
Non-destructive testing of welds Visual testing of fusion-welded joints |
|
EN 751-1:1996
|
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
|
EN 14324:2004
|
Brazing - Guidance on the application of brazed joints |
|
EN 1555-5:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
EN 1555-2:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
|
EN 10217-3:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
|
ISO 14025:2006
|
Environmental labels and declarations — Type III environmental declarations — Principles and procedures |
|
ISO 10497:2010
|
Testing of valves — Fire type-testing requirements |
|
EN 10216-1:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
|
EN 10216-4:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
|
EN 549:1994
|
Rubber materials for seals and diaphragms for gas appliances and gas equipment |
|
EN 14291:2004
|
Foam producing solutions for leak detection on gas installations |
|
EN ISO 17636-1:2013
|
Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
|
EN ISO 9606-1:2017
|
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
|
EN ISO 17638:2016
|
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016) |
|
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
|
EN 12799:2000/A1:2003
|
BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS |
|
ISO 17638:2016
|
Non-destructive testing of welds Magnetic particle testing |
|
EN 10253-2:2007
|
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
|
EN 12542:2010
|
LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
|
EN 10217-1:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
|
EN 10217-6:2002/A1:2005
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
|
EN ISO/IEC 17020:2012
|
Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
|
EN 10216-3:2013
|
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |