|
EN 274-1:2002
|
Waste fittings for sanitary appliances - Part 1: Requirements |
|
ISO 6107-5:2004
|
Water quality Vocabulary Part 5: |
|
EN 12566-1:2016
|
Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks |
|
EN 1295-1:1997
|
Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
|
ISO 6107-4:1993
|
Water quality Vocabulary Part 4: |
|
EN 806-1:2000/A1:2001
|
SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL |
|
EN 12255-10:2000
|
Wastewater treatment plants - Part 10: Safety principles |
|
ISO 6107-8:1993
|
Water quality Vocabulary Part 8: |
|
EN 12056-2:2000
|
Gravity drainage systems inside buildings - Part 2: Sanitary pipework, layout and calculation |
|
EN 1253-4:2016
|
Gullies for buildings - Part 4: Access covers |
|
EN 12050-4:2015
|
Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
|
EN 13508-1:2012
|
Investigation and assessment of drain and sewer systems outside buildings - Part 1: General Requirements |
|
EN 12255-8:2001
|
Wastewater treatment plants - Part 8: Sludge treatment and storage |
|
ISO 16363:2012
|
Space data and information transfer systems — Audit and certification of trustworthy digital repositories |
|
EN 14654-1:2014
|
Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning |
|
EN 12056-1:2000
|
Gravity drainage systems inside buildings - Part 1: General and performance requirements |
|
EN 12255-7:2002
|
Wastewater treatment plants - Part 7: Biological fixed-film reactors |
|
EN 13380:2001
|
General requirements for components used for renovation and repair of drain and sewer systems outside buildings |
|
EN 13725:2003/AC:2006
|
AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
|
EN 1917:2002/AC:2008
|
CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
|
EN 1091:1996
|
Vacuum sewerage systems outside buildings |
|
EN 12255-4:2002
|
Wastewater treatment plants - Part 4: Primary settlement |
|
EN 476:2011
|
General requirements for components used in drains and sewers |
|
ISO 17769-1:2012
|
Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps |
|
EN 12255-1:2002
|
Wastewater treatment plants - Part 1: General construction principles |
|
EN 12832 : 1999
|
CHARACTERISATION OF SLUDGES - UTILISATION AND DISPOSAL OF SLUDGES -VOCABULARY |
|
EN 1433:2002/A1:2005
|
DRAINAGE CHANNELS FOR VEHICULAR AND PEDESTRIAN AREAS - CLASSIFICATION, DESIGN AND TESTING REQUIREMENTS, MARKING AND EVALUATION OF CONFORMITY |
|
ISO 6107-2:2006
|
Water quality Vocabulary Part 2: |
|
EN 12255-16:2005
|
Wastewater treatment plants - Part 16: Physical (mechanical) filtration |
|
EN 12255-14:2003
|
Wastewater treatment plants - Part 14: Disinfection |
|
EN 752:2017
|
Drain and sewer systems outside buildings - Sewer system management |
|
EN 12109:1999
|
Vacuum drainage systems inside buildings |
|
EN 12255-9:2002
|
Wastewater treatment plants - Part 9: Odour control and ventilation |
|
EN 858-1:2002/A1:2004
|
SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
ISO 9000:2015
|
Quality management systems — Fundamentals and vocabulary |
|
EN 1610:2015
|
Construction and testing of drains and sewers |
|
EN 1916:2002/AC:2008
|
CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED |
|
EN 12255-15:2003
|
Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
|
ISO 6107-7:2006
|
Water quality Vocabulary Part 7: |
|
ISO 6107-3:1993
|
Water quality Vocabulary Part 3: |
|
EN 1085:2007
|
Wastewater treatment - Vocabulary |
|
EN 14457:2004
|
General requirements for components specifically designed for use in trenchless construction of drains and sewers |
|
ISO 6107-6:2004
|
Water quality Vocabulary Part 6: |
|
EN 13508-2:2003+A1:2011
|
Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
|
EN 1253-1:2015
|
GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM |
|
EN 1825-1:2004/AC:2006
|
GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL |
|
EN ISO 9000:2015
|
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
|
ISO 6107-1:2004
|
Water quality Vocabulary Part 1: |
|
EN 12056-5:2000
|
Gravity drainage systems inside buildings - Part 5: Installation and testing, instructions for operation, maintenance and use |
|
ISO 5492:2008
|
Sensory analysis — Vocabulary |