|
DIN 6773:2001-04
|
HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
|
DIN EN ISO 6506-2:2016-04 (Draft)
|
METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
|
VDG P 695 : 2008
|
TECHNISCHE LIEFERBEDINGUNGEN FUER FEINGUSSSTUECKE - ALLGEMEINE BEDINGUNGEN |
|
KTA 3204 : 2015
|
|
|
DIN 17751:2002-09
|
TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
|
DIN 3523:2001-04
|
Fittings for drinking water installations - Extensions |
|
DIN 19704-1:2014-11
|
HYDRAULIC STEEL STRUCTURES - PART 1: CRITERIA FOR DESIGN AND CALCULATION |
|
DIN 7603:2001-05
|
Sealing rings |
|
DIN EN ISO 5470-1:2015-04 (Draft)
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
|
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
|
DIN EN ISO 11120:2015-05
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING (ISO 11120:2015) |
|
DIN ISO 4384-1:2014-07
|
Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials (ISO 4384-1:2012) |
|
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
|
DIN HDBK 218 : 6ED 2014
|
|
|
DIN EN ISO 7866:2013-01
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
|
DIN EN ISO 3506-3:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
|
DIN EN ISO 19054:2006-09
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005 + AMD1:2016) |
|
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
|
DIN EN ISO 4498:2010-11
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
|
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
|
VDI 3405-2-1 : 2015 COR 2017
|
ADDITIVE MANUFACTURING PROCESSES, RAPID MANUFACTURING - LASER BEAM MELTING OF METALLIC PARTS; MATERIAL DATA SHEET ALUMINIUM ALLOY ALSI10MG |
|
VDI/VDE 2616 Blatt 1:2012-08
|
Hardness testing of metallic materials |
|
VDI 3405 Blatt 2:2013-08
|
Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
|
KTA 3211.1 : 2015
|
PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
|
DIN EN ISO 683-17:2015-02
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
DIN 21530-4:2016-09
|
MINE SUPPORT - PART 4: TESTING |
|
DIN 32525-4:2010-05
|
Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing |
|
DIN ISO 7795:2011-11
|
Cross-country skis - Ski-binding screws - Test methods (ISO 7795:2011) |
|
DIN EN ISO 12679:2015-12
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
|
DIN 21530-3:2016-09
|
MINE SUPPORT - PART 3: REQUIREMENTS |
|
DIN EN ISO 9015-1:2011-05
|
Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
|
DIN EN ISO 9809-3:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
|
DIN EN ISO 9809-1:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
|
DIN 52108:2010-05
|
Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to Boehme - Grinding wheel method |
|
DIN EN ISO 9170-1:2016-09 (Draft)
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 1: TERMINAL UNITS FOR USE WITH COMPRESSED MEDICAL GASES AND VACUUM |
|
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
|
DIN 50150:2000-10
|
TESTING OF METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
|
DIN HDBK 19 : 17ED 2015
|
MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
|
DIN 17750:2002-09
|
Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
|
DIN EN ISO 9170-2:2009-09
|
TERMINAL UNITS FOR MEDICAL GAS PIPELINE SYSTEMS - PART 2: TERMINAL UNITS FOR ANAESTHETIC GAS SCAVENGING SYSTEMS |
|
DIN ISO 4384-2:2014-07
|
PLAIN BEARINGS - HARDNESS TESTING OF BEARING METALS - PART 2: SOLID MATERIALS (ISO 4384-2:2011 |
|
DIN EN ISO 9809-2:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
|
DIN 51200:2016-08
|
MATERIALS TESTING MACHINES - DESIGN AND APPLICATION OF HOLDING DEVICES FOR TEST PIECES IN HARDNESS TESTING MACHINES |