|
DIN EN ISO 15156-3:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
|
VDG P 695 : 2008
|
TECHNISCHE LIEFERBEDINGUNGEN FUER FEINGUSSSTUECKE - ALLGEMEINE BEDINGUNGEN |
|
DIN EN ISO 3738-1:2010-08
|
Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982); German version EN ISO 3738-1:2010 |
|
DIN 50150:2000-10
|
TESTING OF METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
|
DIN EN ISO 15156-2:2015-12
|
PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
|
DIN EN ISO 6508-2:2015-06
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
|
DIN EN ISO 6508-3:2015-06
|
Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) |
|
DIN EN ISO 9173-1:2017-03
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
|
DIN 6773:2001-04
|
HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
|
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
|
DIN HDBK 218 : 6ED 2014
|
|
|
DIN EN ISO 9809-3:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 3: NORMALIZED STEEL CYLINDERS |
|
DIN EN ISO 17937:2016-01
|
Dentistry - Osteotome (ISO 17937:2015) |
|
DIN EN ISO 7866:2013-01
|
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) |
|
DIN EN ISO 19715:2016-03 (Draft)
|
DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
|
DIN EN ISO 3506-3:2010-04
|
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
|
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
|
DIN EN ISO 4498:2010-11
|
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
|
DIN EN ISO 898-5:2012-09
|
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
|
VDI/VDE 2616 Blatt 1:2012-08
|
Hardness testing of metallic materials |
|
VDI/VDE 2616 Blatt 2:2014-07
|
Hardness testing of plastics and elastomers |
|
DIN 6799:2017-06
|
RETAINING WASHERS FOR SHAFTS |
|
DIN EN ISO 26443:2016-09
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Rockwell indentation test for evaluation of adhesion of ceramic coatings (ISO 26443:2008) |
|
DIN EN ISO 16635-1:2014-09
|
DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
|
DIN EN ISO 18556:2016-09
|
DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
|
DIN ISO 1711-1:2007-05
|
Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007) |
|
DIN EN ISO 12679:2015-12
|
THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
|
DIN EN ISO 14917:2015-09 (Draft)
|
THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
|
DIN EN ISO 19490:2016-07 (Draft)
|
DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
|
DIN EN ISO 683-17:2015-02
|
Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels (ISO 683-17:2014) |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
DIN EN ISO 9873:2016-03 (Draft)
|
DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
|
DIN ISO 7331:2011-10
|
Ski-poles for alpine skiing - Requirements and test methods (ISO 7331:2011) |
|
DIN EN ISO 9809-1:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 1: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH LESS THAN 1100 MPA |
|
DIN 2093:2013-02
|
DISC SPRINGS - QUALITY SPECIFICATIONS - DIMENSIONS |
|
DIN EN ISO 15630-3:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
DIN EN ISO 14920:2015-04
|
Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015) |
|
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
|
DIN HDBK 19 : 17ED 2015
|
MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
|
DIN EN ISO 22068:2014-06
|
Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
|
DIN EN ISO 12670:2015-12
|
THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
|
BWB TL 2530-0039 : 6ED 2008
|
REPAIR OF ROAD WHEEL FOR MTW M113 AND PZH M109 |
|
KTA 3204 : 2015
|
|
|
DIN 7431:2011-03
|
Screwdrivers for hexagon insert bits |
|
DIN EN ISO 9809-2:2010-10
|
GAS CYLINDERS - REFILLABLE SEAMLESS STEEL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING - PART 2: QUENCHED AND TEMPERED STEEL CYLINDERS WITH TENSILE STRENGTH GREATER THAN OR EQUAL TO 1100 MPA |
|
DIN 32525-4:2010-05
|
Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing |
|
DIN 51200:2016-08
|
MATERIALS TESTING MACHINES - DESIGN AND APPLICATION OF HOLDING DEVICES FOR TEST PIECES IN HARDNESS TESTING MACHINES |
|
DIN EN ISO 12690:2011-04
|
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
|
DIN EN ISO 9173-1 E : 2017
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |
|
DIN EN ISO 9173-1:2015-02 (Draft)
|
DENTISTRY - EXTRACTION FORCEPS - PART 1: GENERAL REQUIREMENTS (ISO 9173-1:2016) |