|
DIN EN ISO 20504:2016-10
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPRESSIVE BEHAVIOUR OF CONTINUOUS FIBRE-REINFORCED COMPOSITES AT ROOM TEMPERATURE (ISO 20504:2006) |
|
BWB TL 4220-0026 : 1ED 2002
|
LIFE RAFT, 10 MAN, INFLATABLE; LIFE RAFT, 20 MAN, INFLATABLE |
|
DIN V 18152:2003-10
|
LIGHTWEIGHT CONCRETE SOLID BRICKS AND BLOCKS |
|
DIN V 4165:2003-06
|
AUTOCLAVED AERATED CONCRETE HIGH PRECISION UNITS AND ELEMENTS |
|
DIN ISO 11093-6:2005-09
|
Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005) |
|
DIN EN ISO 12625-11:2013-04
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 11: DETERMINATION OF WET BALL BURST STRENGTH (ISO 12625-11:2012) |
|
DIN EN ISO 15630-2:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 2: WELDED FABRIC |
|
DIN EN 13567:2007-09
|
PROTECTIVE CLOTHING - HAND, ARM, CHEST, ABDOMEN, LEG, GENITAL AND FACE PROTECTORS FOR FENCERS - REQUIREMENTS AND TEST METHODS |
|
DIN EN ISO 3386-1:2015-10
|
POLYMERIC MATERIALS, CELLULAR FLEXIBLE - DETERMINATION OF STRESS-STRAIN CHARACTERISTICS IN COMPRESSION - PART 1: LOW-DENSITY MATERIALS (ISO 3386-1:1986 + AMD 1:2010) |
|
DIN EN ISO 10321:2008-08
|
GEOSYNTHETICS - TENSILE TEST FOR JOINTS/SEAMS BY WIDE-WIDTH STRIP METHOD |
|
DIN EN 12385-1:2009-01
|
STEEL WIRE ROPES - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
VDI/VDE 2624 Blatt 3.1:2011-12
|
Measurement of mechanical quantities - Instructions for the calibration of test units for spring band hose clamps |
|
VDI/BV-BS 6205 Blatt 2:2012-04
|
Lifting inserts and lifting systems for precast concrete elements - Principles, design, applications - Production and placing on the market |
|
DIN EN ISO 13356:2016-02
|
IMPLANTS FOR SURGERY - CERAMIC MATERIALS BASED ON YTTRIA-STABILIZED TETRAGONAL ZIRCONIA (Y-TZP) (ISO 13356:2015) |
|
DIN EN ISO 6892-2:2011-05
|
METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE |
|
DIN EN ISO 3266:2016-05
|
FORGED STEEL EYEBOLTS GRADE 4 FOR GENERAL LIFTING PURPOSES (ISO 3266:2010 + AMD 1:2015) |
|
DIN EN ISO 8067:2009-06
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TEAR STRENGTH |
|
DIN 53579:2015-04
|
TESTING OF FLEXIBLE CELLULAR MATERIALS - INDENTATION TEST ON FINISHED PARTS |
|
DIN 29595:2007-04
|
Welding in aerospace - Fusion welded metallic components - Requirements |
|
DIN EN ISO 17161:2016-10
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - DETERMINATION OF THE DEGREE OF MISALIGNMENT IN UNIAXIAL MECHANICAL TESTS (ISO 17161:2014) |
|
DIN EN ISO 15630-1:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 1: REINFORCING BARS, WIRE ROD AND WIRE |
|
DIN EN ISO 10271:2011-10
|
DENTISTRY - CORROSION TEST METHODS FOR METALLIC MATERIALS |
|
DIN EN ISO 3376:2012-03
|
LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TENSILE STRENGTH AND PERCENTAGE EXTENSION (ISO 3376:2011) |
|
DIN EN ISO 17236:2016-07
|
LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF EXTENSION SET (ISO 17236:2016) |
|
DIN EN ISO 3386-2:2010-09
|
Flexible cellular polymeric materials - Determination of stress-strain characteristics in compression - Part 2: High-density materials (ISO 3386-2:1997 + Amd 1:2010) (includes Amendment A1:2010) |
|
DIN EN ISO 898-1:2013-05
|
MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
|
DIN EN ISO 21181:2013-09
|
LIGHT CONVEYOR BELTS - DETERMINATION OF THE RELAXED ELASTIC MODULUS (ISO 21181:2013) |
|
DIN EN ISO 9513:2013-05
|
Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
|
VDI 2700 Blatt 3.3:2013-05
|
Securing of loads on road vehicles - Cargo nets for load securing |
|
VDI 2700 Blatt 14:2011-09
|
Securing of loads on road vehicles - Determination of coefficients of friction |
|
VDI/VDE 2624 Blatt 2.1:2008-12
|
Measurement of mechanical quantities - Instructions for calibration of mobile force measurement systems |
|
DIN V 105-100:2005-10
|
CLAY MASONRY UNITS - PART 100: CLAY MASONRY UNITS WITH SPECIFIC PROPERTIES |
|
DIN EN ISO 16841:2014-07
|
STEEL WIRE ROPES - PULLING EYES FOR ROPE INSTALLATION - TYPES AND MINIMUM REQUIREMENTS (ISO 16841:2014) |
|
DIN ISO 10275:2009-06
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT |
|
DIN EN ISO 7500-1 Beiblatt 3:1999-11
|
METALLIC MATERIALS - VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES; VERIFICATION AND CALIBRATION OF THE FORCE-MEASURING SYSTEM; GENERAL FOR REQUIREMENTS, VERIFICATION AND CALIBRATION OF FATIGUE TESTING MACHINES |
|
DIN 51220:2003-08
|
General requirements for materials testing machines, including verification and calibration |
|
DIN EN ISO 11960:2014-05
|
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM |
|
DIN EN ISO 13934-2:2014-06
|
TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
|
DIN EN ISO 13934-1:2013-08
|
TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD (ISO 13934-1:2013) |
|
DIN EN ISO 21180:2013-09
|
LIGHT CONVEYOR BELTS - DETERMINATION OF THE MAXIMUM TENSILE STRENGTH (ISO 21180:2013) |
|
DIN EN ISO 14544:2016-10
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE - DETERMINATION OF COMPRESSION PROPERTIES (ISO 14544:2013) |
|
DIN V 18153:2003-10
|
CONCRETE MASONRY UNITS (NORMAL-WEIGHT CONCRETE) |
|
DIN EN ISO 6892-3:2015-07
|
METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015) |
|
DIN HDBK 205 : 5ED 2006
|
MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 3 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMABHAENGIG); SCHWEISSVERBINDUNGEN, METALLKLEBUNGEN |
|
DIN EN ISO 10275:2014-08
|
METALLIC MATERIALS - SHEET AND STRIP - DETERMINATION OF TENSILE STRAIN HARDENING EXPONENT (ISO 10275:2007) |
|
DIN ISO 15759:2006-05
|
Medical infusion equipment - Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process (ISO 15759:2005) |
|
DIN EN ISO 10748:2011-06
|
Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011) |
|
DIN EN ISO 12625-12:2010-05
|
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
|
DIN ISO 16237:2015-11
|
MECHANICAL JOINING - DESTRUCTIVE TESTING OF JOINTS - SPECIMEN DIMENSIONS AND TEST PROCEDURE FOR CROSS-TENSION TESTING OF SINGLE JOINTS (ISO 16237:2015) |
|
DIN V 105-1:2002-06
|
CLAY MASONRY UNITS - PART 1: SOLID UNITS AND VERTICALLY PERFORATED UNITS OF BULK DENSITY CLASSES >= 1.2 |
|
DIN HDBK 118/4 : 4ED 2013
|
PAPIER, PAPPE UND FASERSTOFF 4 - DIN EN ISO 186 BIS DIN EN ISO 15755 SOWIE DIN EN 20187 BIS DIN EN 27213 |
|
DIN EN ISO 15630-3:2011-02
|
STEEL FOR THE REINFORCEMENT AND PRESTRESSING OF CONCRETE - TEST METHODS - PART 3: PRESTRESSING STEEL |
|
DIN EN ISO 9187-1:2011-01
|
Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) |
|
DIN EN ISO 2740:2009-10
|
Sintered metal materials, excluding hardmetals - Tensile test pieces (ISO 2740:2009) |
|
DIN EN ISO 12625-9:2015-05
|
TISSUE PAPER AND TISSUE PRODUCTS - PART 9: DETERMINATION OF BALL BURST STRENGTH (ISO 12625-9:2015) |
|
DIN EN ISO 2439:2009-05
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF HARDNESS (INDENTATION TECHNIQUE) |
|
DIN EN ISO 18265:2014-02
|
METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
|
DIN EN ISO 13935-2:2014-07
|
TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD (ISO 13935-2:2014) |
|
DIN EN ISO 13935-1:2014-07
|
TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD (ISO 13935-1:2014) |
|
DIN EN ISO 12236:2006-11
|
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
|
DIN EN ISO 12737:2011-04
|
METALLIC MATERIALS - DETERMINATION OF PLANE-STRAIN FRACTURE TOUGHNESS |
|
DIN EN ISO 21182:2013-09
|
LIGHT CONVEYOR BELTS - DETERMINATION OF THE COEFFICIENT OF FRICTION (ISO 21182:2013) |
|
DIN EN ISO 9856:2016-06 (Draft)
|
CONVEYOR BELTS - DETERMINATION OF ELASTIC AND PERMANENT ELONGATION AND CALCULATION OF ELASTIC MODULUS (ISO 9856:2016) |
|
DIN V 18151:2003-10
|
LIGHTWEIGHT HOLLOW BLOCKS |
|
DIN HDBK 19 : 17ED 2015
|
MATERIALPRUEFNORMEN FUER METALLISCHE WERKSTOFFE 1 - MECHANISCH-TECHNOLOGISCHE PRUEFVERFAHREN (ERZEUGNISFORMUNABHAENGIG), PRUEFMASCHINEN |
|
DIN EN ISO 8362-7:2011-03
|
Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) |
|
DIN EN ISO 10734:2016-10
|
FOOTWEAR - TEST METHOD FOR SLIDE FASTENERS - STRENGTH OF SLIDE FASTENER PULLERS (ISO 10734:2016) |
|
DIN EN ISO 26203-1:2010-06
|
METALLIC MATERIALS - TENSILE TESTING AT HIGH STRAIN RATES - PART 1: ELASTIC-BAR-TYPE SYSTEMS |
|
DIN 14920:2010-10
|
LINES FOR FIRE-BRIGADES - REQUIREMENTS, TEST METHODS, MAINTENANCE |
|
DIN EN ISO 12996:2013-10
|
MECHANICAL JOINING - DESTRUCTIVE TESTING OF JOINTS - SPECIMEN DIMENSIONS AND TEST PROCEDURE FOR TENSILE SHEAR TESTING OF SINGLE JOINTS (ISO 12996:2013) |
|
DIN V 106-1:2003-02
|
CALCIUM SILICATE UNITS - PART 1: SOLID UNITS, PERFORATED UNITS, SOLID BLOCKS, PERFORATED BLOCKS, HIGH PRECISION UNITS, HIGH PRECISION ELEMENTS, CHAMFERED UNITS, SLABS, SHAPED UNITS |
|
DIN EN ISO 6892-1:2017-02
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
|
DIN EN ISO 25619-2:2015-12
|
GEOSYNTHETICS - DETERMINATION OF COMPRESSION BEHAVIOUR - PART 2: DETERMINATION OF SHORT-TERM COMPRESSION BEHAVIOUR (ISO 25619-2:2015) |
|
DIN 488-6:2010-01
|
Reinforcing steel - Part 6: Assessment of conformity |
|
DIN EN ISO 14916:2015-09 (Draft)
|
THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
|
DIN EN ISO 3377-2:2016-07
|
LEATHER - PHYSICAL AND MECHANICAL TESTS - DETERMINATION OF TEAR LOAD - PART 2: DOUBLE EDGE TEAR (ISO 3377-2:2016) |
|
DIN EN ISO 3377-1:2012-03
|
Leather - Physical and mechanical tests - Determination of tear load - Part 1: Single edge tear (ISO 3377-1:2011) |
|
DIN EN ISO 10319:2015-09
|
GEOSYNTHETICS - WIDE-WIDTH TENSILE TEST (ISO 10319:2015) |
|
DIN EN ISO 14801:2008-02
|
DENTISTRY - IMPLANTS - DYNAMIC LOADING TEST FOR ENDOSSEOUS DENTAL IMPLANTS (ISO 14801:2016) |
|
DIN EN ISO 23910:2008-01
|
LEATHER - PHYSICAL AND MECHANICAL TESTS - MEASUREMENT OF STITCH TEAR RESISTANCE (ISO 23910:2017) |