12/30265298 DC : 0
|
BS EN 12050-4 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER |
DIN EN 13381-9:2015-09
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
DIN EN 15272-3:2008-02
|
INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
17/30348213 DC : 0
|
BS ISO 19426-4 - STRUCTURES FOR MINE SHAFTS - PART 4: CONVEYANCES |
DIN EN 10152:2009-07
|
ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
DIN EN 124-3:2015-09
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
DIN EN 16506 E : 2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
I.S. EN 12079-1:2006
|
OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
BS EN 81-31:2010
|
Safety rules for the construction and installation of lifts. Lifts for the transport of goods only Accessible goods only lifts |
I.S. EN ISO 14713-2:2009
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
12/30265289 DC : 0
|
BS EN 12050-1 - WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
17/30346738 DC : 0
|
BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
BS EN 12693:2008
|
Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors |
10/30216705 DC : 0
|
BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
DIN EN 10025-6:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
DIN EN 13381-9 E : 2015
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
DIN EN 16506:2014-12
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
BS EN 13381-8:2013
|
Test methods for determining the contribution to the fire resistance of structural members Applied reactive protection to steel members |
08/30190326 DC : DRAFT DEC 2008
|
BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
UNE-EN ISO 7963:2011
|
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
10/30212126 DC : 0
|
BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
DIN EN 124-3 E : 2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
PREN 10225-4 : DRAFT 2017
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
DIN EN 10025-4:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
UNE-EN 1993-1-8:2013
|
Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
UNE-EN 1994-1-1:2013
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings |
DIN EN 81-31:2010-08
|
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
I.S. EN 10169:2010
|
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
I.S. EN ISO 12944-1:2017
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
I.S. EN 13000:2010
|
Cranes - Mobile cranes |
15/30320416 DC : 0
|
BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
PREN 12050-4 : DRAFT 2012
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER |
13/30286967 DC : 0
|
BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
UNI EN 13381-8 : 2013
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
EN 10025-6:2004+A1:2009
|
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
DIN EN 1994-1-1:2010-12
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
DIN EN 12732:2014-07
|
Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
BS EN 10025-5:2004
|
Hot rolled products of structual steels Technical delivery conditons for structural steels with improved atmospheric corrosion resistance |
BS EN 10025-2:2004
|
Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels |
BS EN 480-14:2006
|
Admixtures for concrete, mortar and grout. Test methods Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
BS EN 12953-2:2012
|
Shell boilers Materials for pressure parts of boilers and accessories |
BS EN 13000 : 2010
|
CRANES - MOBILE CRANES |
BS EN 303-5:2012
|
Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking |
14/30278953 DC : 0
|
BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
BS EN 12050-2:2015
|
Wastewater lifting plants for buildings and sites Lifting plants for faecal-free wastewater |
I.S. EN 14276-1:2006
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
BS EN 10025-3:2004
|
Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
BS EN 1993-1-1 : 2005
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
UNE-EN ISO 28765:2016
|
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
EN 13084-7:2012
|
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
DIN EN 10025-5:2005-02
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
EN 12050-1:2015
|
Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
EN 13381-2:2014
|
Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes |
EN 124-3:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
DIN EN 10025-4:2005-02
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
DIN EN 10025-6:2009-08
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
DIN EN 1090-2:2011-10
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
EN 13381-8:2013
|
Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members |
EN 12693:2008
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors |
EN 12050-2:2015
|
Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
EN 1337-5:2005
|
Structural bearings - Part 5: Pot bearings |
EN 10169:2010+A1:2012
|
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
EN 12953-2:2012
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
EN 12050-4:2015
|
Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
EN 1270:2005
|
Playing field equipment - Basketball equipment - Functional and safety requirements, test methods |
UNI EN 12732 : 2014
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
ÖNORM EN 14525:2023 01 01
|
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement |
I.S. EN 1994-1-2:2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
DIN EN ISO 14713-2 E : 2010
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
DIN EN ISO 7963:2010-12
|
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
I.S. EN 13611:2015
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
15/30295265 DC : 0
|
BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
11/30235009 DC : 0
|
BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
UNE-EN 1993-1-1:2013
|
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings |
PREN 1090-2 : DRAFT 2015
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
BS EN 13381-9:2015
|
Test methods for determining the contribution to the fire resistance of structural members Applied fire protection systems to steel beams with web openings |
BS EN 15551:2017
|
Railway applications. Railway rolling stock. Buffers |
DIN EN ISO 28765:2016-10
|
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
I.S. EN 10025-5:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
DIN EN 10025-2:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
UNE-EN 1090-2:2011
|
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
DIN EN 10025-3:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
UNE-EN 1994-2:2013
|
Eurocode 4 - Design of composite steen and concrete structures - Part 2: General rules and rules for bridges |
BS EN 10025-4:2004
|
Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
PREN 303-5 : DRAFT 2010
|
CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
UNI EN 13381-2 : 2014
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
I.S. EN 10025-2:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
BS EN 13611:2015
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
ISO 630-6:2014
|
Structural steels — Part 6: Technical delivery conditions for seismic-improved structural steels for building |
NF EN ISO 7963 : 2010
|
NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING SPECIFICATION FOR CALIBRATION BLOCK NO 2 |
17/30360051 DC : 0
|
BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
UNE-EN 10365:2018
|
Hot rolled steel channels, I and H sections - Dimensions and masses |
BS EN 10025-6:2019
|
Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition |
UNE-EN 1993-1-3:2012
|
Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting |
UNI EN ISO 14713-2 : 2010
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
UNI EN ISO 7963 : 2010
|
NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK N DEGREE 2 |
DIN EN 1090-2:2015-07 (Draft)
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 1993-1-1:2005
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
DIN EN 13000:2014-11
|
CRANES - MOBILE CRANES |
DIN EN 1520:2011-06
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
DIN EN 12842:2012-11
|
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
DIN EN 13084-7:2013-03
|
FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
DIN EN 1993-1-3:2010-12
|
Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting (includes Corrigendum AC:2009) |
DIN EN 1993-1-8:2010-12
|
Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
DIN EN 1337-3:2005-07
|
Structural bearings - Part 3: Elastomeric bearings |
DIN EN 303-5:2012-10
|
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
DIN EN 1337-5:2005-07
|
Structural bearings - Part 5: Pot bearings |
BS EN 1270:2005
|
Playing field equipment. Basketball equipment. Functional and safety requirements, test methods |
BS EN 1337-5:2005
|
Structural bearings Pot bearings |
I.S. EN 12842:2012
|
DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
DIN EN 1270:2008-10
|
Playing field equipment - Basketball equipment - Functional and safety requirements, test methods |
I.S. EN 10152:2017
|
ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
I.S. EN 1994-2:2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES (INCLUDING IRISH NATIONAL ANNEX) |
I.S. EN 13852-1:2013
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES |
I.S. EN 1520:2011
|
PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
DIN EN 13611:2019-06
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
I.S. EN 12953-2:2012
|
SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 1994-1-1:2005
|
EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS (INCLUDING IRISH NATIONAL ANNEX) |
I.S. EN 12732:2013
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
I.S. EN 13084-7:2012
|
FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
I.S. EN 10149-1:2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
I.S. EN 1270:2005
|
PLAYING FIELD EQUIPMENT - BASKETBALL EQUIPMENT - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS |
I.S. EN 12050-2:2015
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
I.S. EN 303-5:2012
|
HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
I.S. EN 14394:2006
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
I.S. EN 12050-4:2015
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER |
I.S. EN 12050-1:2015
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
I.S. EN 13204:2016
|
DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
DIN EN 12732:2000-09
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
VDI 3388:2012-03
|
Materials for trimming and forming dies |
VDI 3576:2011-03
|
Rails for crane systems - Rail connections, rail beddings, rail fastenings, tolerances for crane tracks |
UNE-EN 13381-2:2016
|
Test methods for determining the contribution to the fire resistance of structural members - Part 2: Vertical protective membranes |
DIN EN 10365 E : 2017
|
HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES |
DIN EN 10169:2012-06
|
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
BS EN 16506:2014
|
Systems for renovation of drains and sewers. Lining with a rigidly anchored plastics inner layer (RAPL) |
I.S. EN 13381-2:2014
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
UNI EN 12693 : 2008
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
BS EN ISO 7963:2010
|
Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2 |
I.S. EN 15080-8:2009
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS |
I.S. EN 13381-6:2012
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
BS EN 124-3:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys |
12/30265304 DC : 0
|
BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY |
UNI EN 16506 : 2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
17/30351224 DC : 0
|
BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNI EN 303-5 : 2012
|
HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
09/30202029 DC : 0
|
BS EN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
BS EN ISO 14713-2:2009
|
Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures Hot dip galvanizing |
I.S. EN 10365:2017
|
HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES |
15/30318326 DC : 0
|
BS EN 16828 - HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES |
17/30347443 DC : DRAFT JUN 2017
|
BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
05/30132920 DC : DRAFT APR 2005
|
EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR THE EXECUTION OF STEEL STRUCTURES |
EN 115-1:2017
|
Safety of escalators and moving walks - Part 1: Construction and installation |
UNE-EN 13381-4:2014
|
Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
08/30181655 DC : DRAFT SEP 2008
|
BS EN 13001-3-1 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
10/30228886 DC : 0
|
BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING |
BS EN 13381-2:2014
|
Test methods for determining the contribution to the fire resistance of structural members Vertical protective membranes |
BS EN ISO 28765:2016
|
Vitreous and porcelain enamels. Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
ISO 19426-3:2018
|
Structures for mine shafts — Part 3: Sinking stages |
UNI EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
I.S. EN 115-1:2017
|
SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
I.S. EN 12516-1:2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
I.S. EN 13381-9:2015
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS |
I.S. EN 15551:2017
|
RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
CEN/TR 10347:2006
|
Guidance for forming of structural steels in processing |
UNI EN 81-31 : 2010
|
SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
I.S. EN 10025-3:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
UNE-EN ISO 14713-2:2011
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
EN 1090-2:2008+A1:2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO/TR 14799-1:2015
|
Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
EN 10025-2:2004/AC:2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
EN ISO 12944-1:2017
|
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017) |
BS EN 1090-2 : 2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 10225:2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
EN ISO 14713-2:2009
|
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2009) |
DIN EN 480-14:2007-03
|
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
DIN EN 14276-1:2011-05
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
DIN EN 1337-3 E : 2005
|
STRUCTURAL BEARINGS - PART 3: ELASTOMERIC BEARINGS |
DIN EN 1994-2:2010-12
|
Eurocode 4: Design of composite steel and concrete structures - Part 2: General rules and rules for bridges (includes Corrigendum AC:2008) |
DIN EN 12050-4:2015-05
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 4: NON-RETURN VALVES FOR FAECAL-FREE WASTEWATER AND WASTEWATER CONTAINING FAECAL MATTER |
DIN EN 12050-1:2015-05
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
DIN EN 14394 E : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
DIN EN 1337-5 E : 2005
|
STRUCTURAL BEARINGS - PART 5: POT BEARINGS |
DIN EN 14394:2008-12
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 1520:2011
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
UNE-EN 12842:2013
|
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
ISO 28765:2016
|
Vitreous and porcelain enamels — Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
UNE-EN 13204:2017
|
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
BS EN 1993-1-3:2006
|
Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting |
EN 14276-1:2020
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
ISO 7963:2006
|
Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
UNE-EN 12050-4:2015
|
Wastewater lifting plants for buildings and sites - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
UNI EN 14276-1 : 2011
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNE-EN 10225:2010
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN 16506:2014
|
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
UNI EN 10225 : 2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
UNI EN 13084-7 : 2013
|
FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS |
UNI EN 14394 : 2008
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREES C |
UNI EN 1994-2 : 2006
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
UNI EN 12842 : 2012
|
DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
UNI EN 1993-1-3 : 2007
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
UNI EN 1994-1-2 : 2014
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
UNI EN 1520 : 2011
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
EN 13381-6:2012
|
Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
UNI EN 1993-1-8 : 2005
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
EN 13204:2016
|
Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements |
UNI EN 12953-2 : 2012
|
SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 13000 : 2014
|
CRANES - MOBILE CRANES |
UNI EN 13852-1 : 2013
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES |
UNI EN 1994-1-1 : 2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
UNI EN 1993-1-1 : 2014
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
UNI EN 10149-1 : 2013
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
UNI EN 480-14 : 2007
|
ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - TEST METHODS - PART 14: DETERMINATION OF THE EFFECT ON CORROSION SUSCEPTIBILITY OF REINFORCING STEEL BY POTENTIOSTATIC ELECTRO-CHEMICAL TEST |
DIN EN 10149-1:2013-12
|
HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
IWA 14-2:2013
|
Vehicle security barriers — Part 2: Application |
EN 303-5:2012
|
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
BS EN 15080-8:2009
|
Extended application of results from fire resistance tests Beams |
BS EN 13381-6:2012
|
Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns |
PREN 13381-10 : DRAFT 2016
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION |
ISO 17842-1:2015
|
Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
I.S. EN 1993-1-3:2006
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING (INCLUDING IRISH NATIONAL ANNEX) |
UNI EN 13381-4 : 2013
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
DIN EN 10152:2015-10 (Draft)
|
ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
DIN EN 13381-2:2014-12
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
EN 10025-3:2004
|
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels |
12/30257022 DC : 0
|
BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 13381-6:2012-09
|
Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
DIN EN 15080-8:2010-02
|
Extended application of results from fire resistance tests - Part 8: Beams |
UNI EN 15080-8 : 2009
|
EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - PART 8: BEAMS |
PREN 13204 : DRAFT 2015
|
DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
DIN EN 13381-4:2013-08
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
08/30184303 DC : DRAFT SEP 2008
|
BS EN 12952-3 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS |
BS EN 15272-3:2007
|
Inland navigation vessels. Equipment for rope leading Roller fairleads |
13/30279826 DC : 0
|
BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
EN 13000:2010+A1:2014
|
Cranes - Mobile cranes |
BS EN 13381-4:2013
|
Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members |
15/30331856 DC : 0
|
BS EN ISO 10855-1 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINER - DESIGN, MANUFACTURE AND MARKING |
UNI EN 15272-3 : 2008
|
INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
DIN EN 10365:2017-05
|
Hot rolled steel channels, I and H sections - Dimensions and masses; English version EN 10365: 2017 |
ISO 10855-1:2018
|
Offshore containers and associated lifting sets Part 1: Design, manufacture and marking of offshore containers |
I.S. EN 10025-4:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
I.S. EN 13381-8:2013
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 15272-3:2007
|
INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
ISO 19426-4:2018
|
Structures for mine shafts — Part 4: Conveyances |
S.R. CWA 16221:2010
|
VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
I.S. EN 81-31:2010
|
SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF GOODS ONLY - PART 31: ACCESSIBLE GOODS ONLY LIFTS |
PREN 16510-1 : DRAFT 2013
|
RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
BS EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
PREN 13852-1 : DRAFT 2011
|
CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES |
16/30324101 DC : 0
|
BS EN 13381-10 - TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 10: APPLIED PROTECTION TO SOLID STEEL BAR IN TENSION |
PREN 12050-1 : DRAFT 2012
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 1: LIFTING PLANTS FOR WASTEWATER CONTAINING FAECAL MATTER |
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
NF EN 1090-2 : 2009 + A1 2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
UNE-EN 12516-1:2016
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
UNE-EN 13611:2016
|
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
DIN EN 13611:2016-09
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
13/30271701 DC : 0
|
BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
BS EN ISO 12944-1:2017
|
Paints and varnishes. Corrosion protection of steel structures by protective paint systems General introduction |
PREN 13611 : DRAFT 2017
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
UNE-EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
DIN EN 12693:2016-10 (Draft)
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
ISO/TR 14799-2:2015
|
Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments |
EN 10025-4:2004
|
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
I.S. EN 12693:2008
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
PREN 1992-4 : DRAFT 2013
|
EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE |
I.S. EN ISO 7963:2010
|
NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SPECIFICATION FOR CALIBRATION BLOCK NO. 2 |
I.S. EN ISO 28765:2016
|
VITREOUS AND PORCELAIN ENAMELS - DESIGN OF BOLTED STEEL TANKS FOR THE STORAGE OR TREATMENT OF WATER OR MUNICIPAL OR INDUSTRIAL EFFLUENTS AND SLUDGES (ISO 28765:2016) |
IEC 60913:2013
|
Railway applications - Fixed installations - Electric traction overhead contact lines |
NF EN 10225 : 2009
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
DIN EN 12050-2:2015-05
|
WASTEWATER LIFTING PLANTS FOR BUILDINGS AND SITES - PART 2: LIFTING PLANTS FOR FAECAL-FREE WASTEWATER |
DIN EN 10225:2009-10
|
WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
DIN EN 13852-1:2014-01
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
ISO 14713-2:2009
|
Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
BS EN 12050-1:2015
|
Wastewater lifting plants for buildings and sites Lifting plants for wastewater containing faecal matter |
BS EN 14394 : 2005
|
HEATING BOILERS - HEATING BOILERS WITH FORCED DRAUGHT BURNERS - NOMINAL HEAT OUTPUT NOT EXCEEDING 10 MW AND MAXIMUM OPERATING TEMPERATURE OF 110 DEGREE C |
BS EN 1994-2:2005
|
Eurocode 4. Design of composite steel and concrete structures General rules and rules for bridges |
15/30324856 DC : 0
|
BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
BS EN 12050-4:2015
|
Wastewater lifting plants for buildings and sites Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
BS EN 13204 : 2004
|
DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
UNE-EN 12953-2:2013
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
UNE-EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming - Technical delivery conditions |
BS EN 1337-3:2005
|
Structural bearings Elastomeric bearings |
BS EN 13084-7:2012
|
Free-standing chimneys Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
EN 14276-1:2006+A1:2011
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
BS EN 14276-1 : 2006
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
UNE-EN 13000:2010
|
Cranes - Mobile cranes |
PD ISO/TR 14799-2:2005
|
Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
BS EN 1994-1-2 : 2005
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
BS EN 1993-1-8:2005
|
Eurocode 3. Design of steel structures Design of joints |
UNE-EN 13084-7:2013
|
Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners |
BS EN 1994-1-1:2004
|
Eurocode 4. Design of composite steel and concrete structures General rules and rules for buildings |
BS EN 12732 : 2013
|
GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
UNE-EN 12732:2014+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
UNE-EN 12050-1:2015
|
Wastewater lifting plants for buildings and sites - Part 1: Lifting plants for wastewater containing faecal matter |
UNE-EN 10149-1:2014
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions |
UNE-EN 10169:2011
|
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
UNE-EN 12050-2:2015
|
Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for faecal-free wastewater |
UNE-EN 13852-1:2014
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
BS EN 10149-1:2013
|
Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions |
EN ISO 28765:2016
|
Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges (ISO 28765:2016) |
EN 1994-1-1:2004/AC:2009
|
EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 81-31:2010
|
Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts |
EN 15272-3:2007
|
Inland navigation vessels - Equipment for rope leading - Part 3: Roller fairleads |
EN 10225:2009
|
Weldable structural steels for fixed offshore structures - Technical delivery conditions |
EN 14394:2005+A1:2008
|
Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C |
EN 16668:2016+A1:2018
|
Industrial valves - Requirements and testing for metallic valves as pressure accessories |
EN 1994-2:2005/AC:2008
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 2: GENERAL RULES AND RULES FOR BRIDGES |
EN 480-14:2006
|
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
EN 1993-1-3:2006/AC:2009
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
EN 15551:2017
|
Railway applications - Railway rolling stock - Buffers |
EN ISO 7963:2010
|
Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) |
EN 1993-1-8:2005/AC:2009
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
EN 1520:2011
|
Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
EN 15080-8:2009
|
Extended application of results from fire resistance tests - Part 8: Beams |
EN 13852-1:2013
|
Cranes - Offshore cranes - Part 1: General-purpose offshore cranes |
EN 12842:2012
|
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
EN 1993-1-1:2005/A1:2014
|
EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
EN 1994-1-2:2005/A1:2014
|
EUROCODE 4 - DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
I.S. EN 10025-6:2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
DIN EN 13381-8:2013-08
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 8: APPLIED REACTIVE PROTECTION TO STEEL MEMBERS |
17/30346741 DC : 0
|
BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
09/30187535 DC : 0
|
BS EN 13000 - CRANES - MOBILE CRANES |
UNI EN 10025-6 : 2009
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
17/30346735 DC : 0
|
BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
08/30188146 DC : 0
|
BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
15/30327671 DC : 0
|
BS EN 10152 - ELECTROLYTICALLY ZINC COATED COLD ROLLED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
UNE-EN 13381-6:2014
|
Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
UNE-EN 124-3:2015
|
Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys |
BS EN 10365:2017
|
Hot rolled steel channels, I and H sections. Dimensions and masses |
EN 12079-1 : 2006
|
OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING |
DD CEN/TR 10347:2006
|
Guidance for forming of structural steels in processing |
DIN EN 10025-5:2011-04 (Draft)
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
BS EN 10169 : 2010
|
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
UNI EN 13381-6 : 2012
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS |
PREN 14276-1 : DRAFT 2017
|
PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
KTA 3205.2 : 2015 COR 2016
|
COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
UNE-EN 16506:2015
|
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL) |
BS EN 10025-6 : 2004
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
UNE-EN 1994-1-2:2016
|
Eurocode 4 - Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design. |
I.S. EN 1090-2:2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
I.S. EN 13381-4:2013
|
TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS |
I.S. EN 124-3:2015
|
GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS |
UNI EN 1090-2 : 2011
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
ISO 12944-1:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
UNE-EN 15080-8:2011
|
Extended application of results from fire resistance tests - Part 8: Beams |
I.S. EN 16668:2016
|
INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES |
BS EN 115-1:2017
|
Safety of escalators and moving walks Construction and installation |
I.S. EN 16506:2014
|
SYSTEMS FOR RENOVATION OF DRAINS AND SEWERS - LINING WITH A RIGIDLY ANCHORED PLASTICS INNER LAYER (RAPL) |
EN 10025-5:2004
|
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
UNI EN 10169 : 2012
|
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
17/30346732 DC : 0
|
BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
DIN EN 12516-1:2015-01
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
UNE-EN 13381-9:2016
|
Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 1993-1-1:2010-12
|
Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009) |
I.S. CEN TR 10347:2006
|
GUIDANCE FOR FORMING OF STRUCTURAL STEELS IN PROCESSING |
DIN EN 12953-2:2012-05
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 1994-1-2:2010-12
|
Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design (includes Corrigendum AC:2008) |
BS EN 12079-1:2006
|
Offshore containers and associated lifting sets Offshore containers. Design, manufacture and marking |
BS EN 10225:2009
|
Weldable structural steels for fixed offshore structures. Technical delivery conditions |
BS EN 13852-1:2013
|
Cranes. Offshore cranes General-purpose offshore cranes |
BS EN 12842:2012
|
Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
UNE-EN 303-5:2013
|
Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking |
PD ISO/TR 14799-1:2005
|
Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison |
BS EN 10152:2017
|
Electrolytically zinc coated cold rolled steel flat products for cold forming. Technical delivery conditions |
BS ISO 17842-1:2015
|
Safety of amusement rides and amusement devices Design and manufacture |
DIN EN 12693:2008-09
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
DIN EN ISO 14713-2:2010-05
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
I.S. EN 13611:2015/AC:2016
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 10365:2017
|
Hot rolled steel channels, I and H sections - Dimensions and masses |
EN 1337-3:2005
|
Structural bearings - Part 3: Elastomeric bearings |
EN 12732:2013+A1:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
EN 13381-4:2013
|
Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members |
EN 13381-9:2015
|
Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings |
UNE-EN 12732:2014
|
Gas infrastructure - Welding steel pipework - Functional requirements |
UNE-EN 14276-1:2007
|
Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |