Skip to content
Please enter a keyword to search

  • EN 10028-2:2017

    Current The latest, up-to-date edition.

    Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

    Available format(s): 

    Language(s): 

    Published date:  26-07-2017

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Tolerances on dimensions
    5 Calculation of mass
    6 Classification and designation
    7 Information to be supplied by the purchaser
    8 Requirements
    9 Inspection
    10 Sampling
    11 Test methods
    12 Marking
    Annex A (informative) - Guidelines for heat treatment
    Annex B (informative) - Critical time temperature parameter
            P[crit.] and possible combinations of stress relieving
            temperature and holding time
    Annex C (informative) - Reference data of strength values for
            1% (plastic) creep strain and creep rupture
    Annex D (normative) - Evaluation of resistance to hydrogen
            induced cracking
    Annex E (normative) - Step cooling test
    Annex F (informative) - Changes to the previous version
            EN 10028-2:2009
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of European
             Directive 2014/68/EU aimed to be covered
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies requirements for flat products for pressure equipment made of weldable non-alloy and alloy steels with elevated temperature properties as specified in Table 1.The requirements and definitions of EN 10028-1:2017 also apply.NOTEOnce this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and this Part 2 of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes NFA 36 207. Supersedes EURONORM 28. (07/2004) Supersedes PREN 10028-2. (07/2017)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    12/30260516 DC BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    BS EN 10253-2:2007 Butt-welding pipe fittings Non alloy and ferritic alloy steels with specific inspection requirements
    05/30114324 DC : DRAFT FEB 2005 EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS
    BS EN 1708-3:2012 Welding. Basic weld joint details in steel Clad, buttered and lined pressurized components
    08/30184309 DC : DRAFT SEP 2008 BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
    11/30235688 DC : 0 BS EN 13240 - ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    I.S. EN 13229:2001 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    PREN 12493 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    10/30216705 DC : 0 BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    UNI EN 4632-003 : 2011 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
    16/30338590 DC : 0 BS EN 10164 - STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
    I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    15/30318676 DC : 0 BS EN 10056-1 - STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
    DIN EN 1708-3:2012-05 Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components
    10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
    16/30338096 DC : 0 BS EN 303-1 - HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    09/30156692 DC : 0 BS EN 10029 - HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
    PREN 10051 : DRAFT 2009 HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
    VDMA 24408 : DRAFT 2015 LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE
    DIN EN 10048:1996-10 HOT-ROLLED NARROW STEEL STRIP - TOLERANCES ON DIMENSIONS AND SHAPE
    PREN 4632-003 : DRAFT 2008 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
    PREN 303-1 : DRAFT 2016 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
    BS EN 14917 : 2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    S.R. CWA 16519:2012 DESIGN AND CONSTRUCTION CODE FOR MECHANICAL EQUIPMENTS OF INNOVATIVE NUCLEAR INSTALLATIONS
    I.S. EN 12493:2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    EN 14917:2009+A1:2012 Metal bellows expansion joints for pressure applications
    PD CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications Design method
    16/30319005 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
    BS EN 12285-1:2003 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
    DIN EN 12285-1:2016-10 (Draft) WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    NF EN 12542 : 2011 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    BS EN 13480-2:2017 Metallic industrial piping Materials
    DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    DIN EN 14879-1 E : 2005 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
    DIN EN 14879-1:2005-12 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
    BS EN 14208:2004 Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction
    BS EN 13445-4 : 2014 UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
    BS EN 12809 : 2001 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    BS EN 303-5:2012 Heating boilers Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW. Terminology, requirements, testing and marking
    I.S. EN 14276-1:2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    BS EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    BS EN 10029:2010 Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape
    BS EN 14075:2002 Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3 and for installation underground. Design and manufacture
    EN 13084-7:2012 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
    EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
    EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
    EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    EN 12809:2001/A1:2004/AC:2007 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
    EN 13229:2001/A2:2004/AC:2007 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
    EN 12953-2:2012 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
    EN 10048:1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape
    ONORM EN 12809 : 2006 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    ONORM EN 14785 : 2006 RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    PREN 14015-1 : DRAFT 2000 SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
    DIN EN 14917:2012-06 Metal bellows expansion joints for pressure applications (includes Amendment A1:2012)
    PD CEN/TR 13445-101:2015 Unfired pressure vessels. Example of application
    DIN EN 10253-2:2008-09 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
    EEMUA 159 : 2014 ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR
    13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
    04/30116684 DC : DRAFT JUL 2004 EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LPG METALLIC PRESSURE DRUMS WITH A CAPACITY BETWEEN (150 AND 1 000 LITRES)
    UNI EN 1708-3 : 2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    17/30351224 DC : 0 BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    11/30249105 DC : 0 BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    11/30235685 DC : 0 BS EN 13229 - INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    PREN 10164 : DRAFT 2016 STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS
    09/30200092 DC : 0 BS EN 10051 - HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
    PREN 10029 : DRAFT 2009 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
    S.R. CEN/TR 13445-102:2015 UNFIRED PRESSURE VESSELS - PART 102: EXAMPLE OF APPLICATION OF VERTICAL VESSEL WITH BRACKET SUPPORTS
    DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    PREN 16510-1 : DRAFT 2013 RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    PREN 303-5 : DRAFT 2010 CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    DIN EN 10365:2017-05 Hot rolled steel channels, I and H sections - Dimensions and masses; English version EN 10365: 2017
    BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
    CEN/TR 13445-102:2015 Unfired pressure vessels - Part 102: Example of application of vertical vessel with bracket supports
    EN 10253-2:2007 Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
    EN ISO 4126-2:2003/AC:2006 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    EN 13445-4 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
    I.S. EN 10253-2:2007 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
    DIN EN 12285-2:2005-05 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    DIN EN 12809:2005-08 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
    DIN EN 13084-7:2013-03 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
    DIN EN 303-5:2012-10 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    DIN EN 14422:2013-09 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
    UNE-EN 12542:2011 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
    I.S. EN 12542:2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    I.S. EN 1092-3:2003 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    I.S. EN 10029:2010 HOT-ROLLED STEEL PLATES 3 MM THICK OR ABOVE - TOLERANCES ON DIMENSIONS AND SHAPE
    DIN EN 12542:2010-12 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    DIN EN 10028-1:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
    DIN EN 13240:2002-02 ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    I.S. EN 12953-2:2012 SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    I.S. EN 14422:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
    I.S. EN 13084-7:2012 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
    I.S. EN 12952-2:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    I.S. EN 303-1:2017 HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    DIN EN 13229:2002-01 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    I.S. EN 303-5:2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    I.S. EN 12952-5:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
    I.S. EN 10028-1:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
    DIN EN 12493:2017-01 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    UNI EN 12493 : 2014 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    UNI EN 10029 : 2011 Hot rolled steel sheets with a thickness greater than or equal to 3 mm - Tolerances on dimensions and shape
    KTA 3507 : 2014(R2017) FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM
    KTA 3702 : 2014(R2017) EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS
    NF EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    ASME PV CODE 2A : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - FERROUS MATERIAL SPECIFICATIONS (BEGINNING TO SA-450) AND (SA-451 TO END)
    NFL 06 380-21 : 2003 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 21: HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
    DIN EN 10365 E : 2017 HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES
    I.S. EN 13240:2001 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    16/30319008 DC : 0 BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS
    I.S. EN 10056-1:2017 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
    I.S. EN 12815:2001 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    08/30180502 DC : DRAFT JUNE 2008 BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    13/30266592 DC : 0 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
    00/714962 DC : DRAFT OCT 2000 PREN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOF STEEL VALVE SHELLS
    UNI EN 303-5 : 2012 HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    07/30165594 DC : DRAFT AUG 2007 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL TANKS FOR LIQUEFIED PETROLEUM GAS (LPG) - ROAD TANKERS DESIGN AND MANUFACTURE
    I.S. EN 10365:2017 HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES
    04/30125241 DC : DRAFT NOV 2004 EN 15085-4 - RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 4: PRODUCTION REQUIREMENTS
    15/30318326 DC : 0 BS EN 16828 - HOT ROLLED STEEL CHANNELS, I AND H SECTIONS - DIMENSIONS AND MASSES
    17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
    10/30234607 DC : 0 BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
    08/30167676 DC : DRAFT JAN 2008 BS EN 10120 - STEEL SHEET AND STRIP FOR WELDED GAS CYLINDERS
    11/30236583 DC : 0 BS EN 14917:2009/A1 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    07/30166946 DC : DRAFT AUG 2007 BS EN 15711 - VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS
    04/30109196 DC : DRAFT FEB 2004 EN 14879 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 1: TERMINOLOGY, DESIGN AND PREPARATION OF SUBSTRATE
    10/30228886 DC : 0 BS EN 303-5 - CENTRAL-HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, HAND AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING
    04/30118252 DC : DRAFT AUG 2004 EN 14917 - METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    14/30260020 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS
    00/715206 DC : DRAFT OCT 2000 PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS
    PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
    PREN 12285-1 : DRAFT 2016 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    DIN EN 14917 E : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    UNI EN 12516-1 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    NF EN 4632-003 : 2010 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
    BS EN 10056-1:2017 Structural steel equal and unequal leg angles Dimensions
    UNE-EN 10029:2011 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
    EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    UNE-EN 10056-1:2017 Structural steel equal and unequal leg angles - Part 1: Dimensions
    I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
    I.S. EN 4632-003:2010 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 003: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF UNALLOYED AND LOW ALLOY STEELS
    PREN 12542 : DRAFT 2016 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    PREN 12809 : DRAFT 2011 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    UNE-EN 12952-5:2012 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
    EN 12285-1:2003 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    I.S. EN 14917:2009 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN 14785 E : 2006 RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    DIN EN 14276-1:2011-05 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    DIN EN 14422 E : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
    BS EN 1503-1:2000 Valves. Materials for bodies, bonnets and covers Steels specified in European Standards
    EN 14276-1:2020 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    DIN EN 14785:2006-09 Residential space heating appliances fired by wood pellets - Requirements and test methods
    UNI EN 12542 : 2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE
    UNI EN 14276-1 : 2011 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    UNE-EN 13445-4:2015 Unfired pressure vessels - Part 4: Fabrication
    EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
    EN 13240:2001/A2:2004/AC:2007 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    EN 14208:2004 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
    UNI EN 13240 : 2006 ROOM-HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNI EN 12952-5 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
    UNI EN 13084-7 : 2013 FREE-STANDING CHIMNEYS - PART 7: PRODUCT SPECIFICATIONS OF CYLINDRICAL STEEL FABRICATIONS FOR USE IN SINGLE WALL STEEL CHIMNEYS AND STEEL LINERS
    UNI EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
    UNI EN 12809 : 2004 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    UNI EN 12815 : 2006 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNI EN 10051 : 2011 CONTINUOUSLY HOT-ROLLED STRIP AND PLATE/SHEET CUT FROM WIDE STRIP OF NON-ALLOY AND ALLOY STEELS - TOLERANCES ON DIMENSIONS AND SHAPE
    UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
    UNI EN 12953-2 : 2012 SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    UNI EN 14785 : 2006 RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    UNI EN 14422 : 2013 CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES
    EN 303-5:2012 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    04/30125076 DC : 0 EN 10111 - CONTINUOUSLY HOT ROLLED LOW CARBON STEEL SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
    BS EN 4632-003:2010 Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
    PD CEN/TR 13445-102:2015 Unfired pressure vessels Example of application of vertical vessel with bracket supports
    I.S. EN 12809:2001 RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    DIN EN 303-1:2016-07 (Draft) HEATING BOILERS - PART 1: HEATING BOILERS WITH FORCED DRAUGHT BURNERS - TERMINOLOGY, GENERAL REQUIREMENTS, TESTING AND MARKING
    99/707159 DC : DRAFT APR 99 BS PREN 13480-2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
    16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    DIN 19211:2004-02 Measurement of fluid flow by means of pressure differential devices - Condensation chambers
    DIN EN 10056-1:2017-06 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
    I.S. EN 1708-3:2012 WELDING - BASIC WELD JOINT DETAILS IN STEEL - PART 3: CLAD, BUTTERED AND LINED PRESSURIZED COMPONENTS
    UNI EN 14917 : 2012 METAL BELLOWS EXPANSION JOINTS FOR PRESSURE APPLICATIONS
    11/30238022 DC : DRAFT MAR 2011 BS EN 12815 - RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
    S.R. CEN/TR 14585-3:2017 CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD
    BS EN 12516-1 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
    UNE-EN 12516-1:2016 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    13/30271701 DC : 0 BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    16/30326248 DC : 0 BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    DIN EN 12493:2014-03 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    PREN 14893 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    EN 12480:2018 Gas meters - Rotary displacement gas meters
    S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
    I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
    BS EN 13480-2:2017+A3:2018 Metallic industrial piping Materials
    DIN EN 14015:2005-02 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    DIN EN 10029:2011-02 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
    DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
    DIN EN 14208:2004-05 Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction
    BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
    BS EN 1759-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges
    BS EN 12542:2010 LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3. Design and manufacture
    BS EN 14879-1:2005 0rganic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Terminology, design and preparation of substrate
    BS EN 12815 : 2001 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    UNE-EN 12952-2:2012 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
    BS EN 12952-5:2011 Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler
    UNE-EN 12953-2:2013 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
    ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
    BS EN 10048:1997 Hot rolled narrow steel strip. Tolerances on dimensions and shape
    BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
    BS EN 13240 : 2001 ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    BS EN 13084-7:2012 Free-standing chimneys Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
    EN 14276-1:2006+A1:2011 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
    EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
    BS EN 14276-1 : 2006 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
    BS EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
    UNE-EN 13084-7:2013 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners
    UNE-EN 14422:2014 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
    UNE-EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
    BS EN 14785:2006 Residential space heating appliances fired by wood pellets. Requirements and test methods
    BS EN 1092-3:2003 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated Copper alloy flanges
    BS EN 12953-2:2012 Shell boilers Materials for pressure parts of boilers and accessories
    BS EN 303-4:1999 Heating boilers. Heating boilers with forced draught burners Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar. Terminology, special requirements, testing and marking
    EN 14422:2013 Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
    EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    EN 14785:2006 Residential space heating appliances fired by wood pellets - Requirements and test methods
    EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
    EN 1503-1:2000 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
    EN 14015:2004 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
    EN 1708-3:2012 Welding - Basic weld joint details in steel - Part 3: Clad, buttered and lined pressurized components
    EN 286-1:1998/A2:2005 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
    EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 4632-003:2010 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels
    EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
    EN 303-4:1999 Heating boilers - Part 4: Heating boilers with forced draught burners - Special requirements for boilers with forced draught oil burners with outputs up to 70 kW and a maximum operating pressure of 3 bar - Terminology, special requirements, testing and marking
    EN 14075:2002/A1:2004 STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
    EN 14879-1:2005 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate
    PREN 10253-2 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    DIN 2695:2002-11 Diaphragm-weld packings and weld ring seals for flange connections
    BS EN 12493 : 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    03/317080 DC : DRAFT OCT 2003 EN 14785 - RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS
    I.S. EN 14075:2002 STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
    08/30184300 DC : DRAFT SEP 2008 BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
    PD CR 10313:2000 Classification of grades of steel. Examples of classification related to European standards
    CEN/TR 14585-3:2017 Corrugated metal hose assemblies for pressure applications - Part 3: Design method
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    11/30238019 DC : 0 BS EN 12809 - RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS
    PREN 14422 : DRAFT 2010 CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
    PREN 13240 : DRAFT 2011 ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    PREN 10056-1 : DRAFT 2015 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
    PREN 15250 : DRAFT 2012 SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
    00/705406 DC : 0 PREN 13831 - CLOSED EXPANSION VESSELS WITH BUILT IN DIAPHRAGM FOR INSTALLATION IN WATER SYSTEMS
    PD 6588:1996 Welding. Guidelines for a grouping system for welding purposes
    BS EN 10365:2017 Hot rolled steel channels, I and H sections. Dimensions and masses
    DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    PREN 14276-1 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
    KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
    I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
    UNE-EN 12493:2014 LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
    S.R. CEN/TR 13445-101:2015 UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION
    UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
    I.S. EN 12516-1:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    UNI EN 1092-1 : 2013 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
    UNE-EN 10365:2018 Hot rolled steel channels, I and H sections - Dimensions and masses
    I.S. EN 12285-1:2003 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    DIN EN 12516-1:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
    UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
    CEN/TR 13445-101:2015 Unfired pressure vessels - Example of application
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    UNE-EN 14917:2011 Metal bellows expansion joints for pressure applications
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 12493:2013+A1:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    S.R. CR 10313:2000 CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS
    DIN EN 12953-2:2012-05 Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
    DIN EN 12952-2:2011-10 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
    DIN EN 12952-5:2012-01 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
    DIN EN 1759-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
    BS EN 13229 : 2001 INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS
    BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    BS EN 286-1 : 1998 SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
    BS EN 12952-2:2011 Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
    UNE-EN 303-5:2013 Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking
    BS EN 10028-1:2017 Flat products made of steels for pressure purposes General requirements
    BS EN 12285-2:2005 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
    BS EN 303-1:2017 Heating boilers Heating boilers with forced draught burners. Terminology, general requirements, testing and marking
    ISO/TR 20172:2009 Welding Grouping systems for materials European materials
    DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    EN 12815:2001/A1:2004/AC:2007 RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    DIN EN 10056-1:1998-10 STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS
    ONORM EN 10253-2 : 2008 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
    EN 10365:2017 Hot rolled steel channels, I and H sections - Dimensions and masses
    CR 10313:2000 Classification of grades of steel - Examples of classification related to European Standards
    EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
    DIN EN 14075:2003-01 STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] AND FOR INSTALLATION UNDERGROUND - DESIGN AND MANUFACTURE
    UNE-EN 13480-2:2017 Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
    UNE-EN 14276-1:2007 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
    NACE TM 02 84 : 2016 EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING
    EN 10314:2016 Method for the derivation of minimum values of proof strength of steel at elevated temperatures
    EN 1011-1:2009 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
    EN 10229 : 1998 EVALUATION OF RESISTANCE OF STEEL PRODUCTS TO HYDROGEN INDUCED CRACKING (HIC)
    EN 1011-2:2001/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
    ISO 6303:1981 Pressure vessel steels not included in ISO 2604, Parts 1 to 6 — Derivation of long-time stress rupture properties
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 10020:2000 Definition and classification of grades of steel
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective