EN 1092-2:1997

Withdrawn

Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges

Available format(s):

Withdrawn date: 31-10-1997

Language(s):

Published date: 23-04-1997

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
  3.1 Flange
  3.2 DN (Nominal size)
  3.3 PN
  3.4 Ductile iron
  3.5 Grey iron
  3.6 Malleable iron
  3.7 Joint
4 Designation and types
  4.1 Range of DN
  4.2 Range of PN designations
  4.3 Types of flanges
  4.4 Standard designation
  4.5 Information to be supplied by the purchaser
5 General requirements
  5.1 Flange material
  5.2 Repairs by welding
  5.3 Bolting
  5.4 Gaskets
  5.5 Pressure/Temperature (p/T) ratings
  5.6 Dimensions
  5.7 Flange facings
  5.8 Spot facing or back facing
  5.9 Tolerances
  5.10 Marking and stamping
  5.11 Quality assurance
Annex A (normative) Information to be supplied by the
        purchaser
Annex B (informative) Notes to tables 6 to 12
Annex C (informative) Bibliography

Abstract - (Show below) - (Hide below)

This part of EN 1092 specifies requirements for circular flanges made from ductile, grey and malleable cast iron for DN 10 to DN 4000 and PN 63. (See 4.1 and 4.2). This standard specifies the types of flanges and their facings, dimension and tolerances, bolt sizes, surface finish of jointing faces, marking testing, quality assurance and materials together with associated pressure/ temperature (p/T) ratings.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 74
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Withdrawn

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
UNE-EN 1092-2:1998	Identical
UNI EN 1092-2 : 1999	Identical
NBN EN 1092-2 : 1997	Identical
I.S. EN 1092-2:1997	Identical
PN EN 1092-2 : 1999	Identical
BS EN 1092-2:1997	Identical
SN EN 1092-2 : 1997	Identical
NF EN 1092-2 : 1997	Identical
NS EN 1092-2 : 1ED 1997	Identical
NEN EN 1092-2 : 1997	Identical
DS EN 1092-2 : 1997	Identical
DIN EN 1092-2:1997-06	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

13/30255705 DC : 0	BS EN 1514-2 - FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
BS EN 15420:2010	Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW
BS EN 16678:2015	Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
I.S. EN 12334:2001	INDUSTRIAL VALVES - CAST IRON CHECK VALVES
PREN 1171 : DRAFT 2014	INDUSTRIAL VALVES - CAST IRON GATE VALVES
10/30216705 DC : 0	BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
PREN 598 : DRAFT 2017	COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
05/30134037 DC : 0	EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 593:2017	Industrial valves. Metallic butterfly valves for general purposes
BS EN 60534-3-2:2001	Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves
BS EN 16767:2016	Industrial valves. Steel and cast iron check valves
DD CLC/TS 50537-3:2010	Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters
14/30291756 DC : 0	BS EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
03/118276 DC : DRAFT NOV 2003	BS EN 14812-1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE AND SAFETY TESTING - PART 1: PRE-SET DOSING SYSTEMS
16/30345752 DC : 0	BS EN 12516-4:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
01/716091 DC : DRAFT DEC 2001	ISO 4126-4.3 - SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 4: PILOT-OPERATED SAFETY VALVES
UNE-EN 16767:2017	Industrial valves - Steel and cast iron check valves
04/30121918 DC : DRAFT SEP 2004	EN 1591-3 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT
14/30301577 DC : 0	BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
I.S. EN 1515-4:2009	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
CEI CLC/TS 50537-2 : 2011	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
S.R. CLC/TS 50537-2:2010	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
I.S. EN 15420:2010	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
I.S. EN 15502-1:2012	GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
ISO 10631:2013	Metallic butterfly valves for general purposes
UNE-EN 16678:2016	Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
16/30334287 DC : 0	BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
DIN EN 334:2016-05 (Draft)	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
I.S. EN 14382:2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 676:2003+A2:2008/AC:2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 1514-2 E : 2014	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
DIN EN 13434:2006-05	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G - TYPE B
DIN EN 14268 E : 2005	IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
DIN EN 1591-1:2014-04	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
DIN EN 13433:2006-05	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G - TYPE A
EN 12309-2:2015/AC:2015	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
DIN EN 1514-8 E : 2005	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 8: POLYMERIC O-RING GASKETS FOR GROOVED FLANGES
DIN EN 1514-6 E : 2004	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 6: COVERED SERRATED METAL GASKETS FOR USE WITH STEEL FLANGES
DIN EN ISO 23553-1:2014-09	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
DIN EN 14267 E : 2004	IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
DIN EN 14382 E : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
BS EN 14267:2004	Irrigation techniques. Irrigation hydrants
UNE-EN 331:2016	Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 14382 : 2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 14812:2005	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
EN 12094-5:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
CEN/TS 1591-3:2007	Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
EN 13443-1:2002+A1:2007	Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
EN 12729:2002	Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
EN 13433:2006	Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
EN 1349:2009	Industrial process control valves
EN 12953-3:2016	Shell boilers - Part 3: Design and calculation for pressure parts
EN 12953-2:2012	Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
API RP 697:2023	Pump Repair
BS EN 1349:2009	Industrial process control valves
I.S. EN 12729:2002	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - CONTROLLABLE BACKFLOW PREVENTER WITH REDUCED PRESSURE ZONE - FAMILY B - TYPE A
PREN 13774 : DRAFT 2011	VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
09/30202316 DC : 0	BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
13/30288560 DC : 0	BS EN 12953-3 - SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
13/30286091 DC : 0	BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
DD CLC/TS 50537-2:2010	Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors
13/30279702 DC : 0	BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
PREN 14382 : DRAFT 2016	GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
98/717199 DC : DRAFT NOV 1998	PREN 13397: INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS
PREN 13789 : DRAFT 2009	INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
UNI EN 1515-4 : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
BS ISO 10631:2013	Metallic butterfly valves for general purposes
10/30216654 DC : 0	BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
CLC/TS 50537-2:2010	Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors
02/710678 DC : DRAFT SEP 2002	PREN 1514-8 - FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 8: POLYMERIC O-RING GASKETS FOR GROOVED FLANGES
BS ISO 19240:2017	Industrial valves. Lined metal quarter turn and check valves for chemical process and related industries
CLC/TS 50537-3:2010	Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters
04/30117386 DC : DRAFT JUL 2004	EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
PREN 12309-2 : DRAFT 2013	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
I.S. EN 593:2017	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
IEC 60534-3-2:2001	Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
ONORM EN 334 : JUN 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 15420:2012	Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW
BS EN 1434-2 : 2015	HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
UNI EN 12516-4 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
EN 1434-2:2015	Heat meters - Part 2: Constructional requirements
DIN EN 12516-4:2015-01	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
EN 12516-4:2014	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
UNE-EN 1434-2:2016	Heat meters - Part 2: Constructional requirements
EN 267:2009+A1:2011	Automatic forced draught burners for liquid fuels
DIN EN 1171:2015-11	INDUSTRIAL VALVES - CAST IRON GATE VALVES
DIN EN 12842:2012-11	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
DIN EN 14382:2016-05 (Draft)	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 267:2012-03 (Draft)	AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 598:2009-10	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods (includes Amendment A1:2009)
DIN EN 267:2011-11	Automatic forced draught burners for liquid fuels
DIN EN 14268:2005-11	IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
DIN EN 1514-6:2004-03	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 1514-6:2003
DIN EN 14267:2004-10	IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
DIN EN 14384:2005-10	PILLAR FIRE HYDRANTS
DIN EN 14339:2005-10	UNDERGROUND FIRE HYDRANTS
BS EN 12334:2001	Industrial valves. Cast iron check valves
BS EN 598 : 2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
BS EN 334 : 2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 545:2011	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
BS EN 14812 : 2005	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 13443-1:2002	Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing
BS EN 1591-1:2013	Flanges and their joints. Design rules for gasketed circular flange connections Calculation
BS EN 1514-8:2004	Flanges and their joints. Dimensions of gaskets for PN-designated flanges Polymeric O-Ring gaskets for grooved flanges
BS EN 1514-7:2004	Flanges and their joints. Dimensions of gaskets for PN-designated flanges Covered metal jacketed gaskets for use with steel flanges
UNE-EN 593:2009	Industrial valves - Metallic butterfly valves
BS EN 12729:2002	Devices to prevent pollution by backflow of potable water. Controllable backflow preventer with reduced pressure zone. Family B. Type A
I.S. EN 12953-3:2016	SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
I.S. EN 1171:2015	INDUSTRIAL VALVES - CAST IRON GATE VALVES
I.S. EN 13774:2013	VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
I.S. EN 14652:2006	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
I.S. EN 598:2007	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
I.S. EN 969:2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 12842:2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
DIN EN 12334:2004-10	INDUSTRIAL VALVES - CAST IRON CHECK VALVES
DIN EN 12334:2001-04	INDUSTRIAL VALVES - CAST IRON CHECK VALVES
I.S. EN 1514-2:2014	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
I.S. EN 1074-6:2009	VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
I.S. EN 12953-2:2012	SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 331:2015	MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
I.S. EN 12094-5:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS
EN 1514-2:2014	Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
I.S. EN 545:2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
I.S. EN 13434:2006	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, HYDRAULIC ACTUATED - FAMILY G, TYPE B
I.S. EN 1349:2009	INDUSTRIAL PROCESS CONTROL VALVES
I.S. EN 13789:2010	INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
I.S. EN 12309-2:2015	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
I.S. EN 13443-1:2002	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
I.S. EN 1591-1:2013	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
I.S. EN 13433:2006	DEVICES TO PREVENT POLLUTION BY BACKFLOW OF POTABLE WATER - MECHANICAL DISCONNECTOR, DIRECT ACTUATED - FAMILY G, TYPE A
UNI EN 1349 : 2010	INDUSTRIAL PROCESS CONTROL VALVES
VDI 2200:2007-06	Tight flange connections - Selection, calculation, design and assembly of bolted flange connections
VDI 2290:2012-06	Emission control - Sealing constants for flange connections
CEI CLC/TS 50537-3 : 2011	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
04/30118763 DC : DRAFT AUG 2004	PREN 12335 - INDUSTRIAL VALVES - CAST IRON PLUG VALVES
PREN 12842 : DRAFT 2010	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
07/30171473 DC : 0	BS ISO 2531 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER APPLICATIONS
08/30187521 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
02/710115 DC : DRAFT AUG 2002	PREN 14525 - DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
PREN 12516-4 : DRAFT 2011	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
NF EN 15420 : 2012	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
10/30218092 DC : 0	BS EN 15502-1 - GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
06/30149018 DC : 0	EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
03/107351 DC : DRAFT APR 2003	EN 1514-2 - FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
12/30257298 DC : 0	BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
12/30247796 DC : DRAFT JAN 2012	BS EN 1591-1 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATIONS
I.S. EN 12516-4:2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
12/30258099 DC	BS EN 267. Forced draught burners for liquid fuels
DIN EN 15420 E : NOV 2011	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
DIN EN 16767 E : 2016	INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
17/30347443 DC : DRAFT JUN 2017	BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
11/30249111 DC : 0	BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
EN 12953-4:2018	Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler
I.S. EN 12953-4:2002	SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNI EN 334 : 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNI EN 15420 : 2011	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
I.S. EN 16767:2016	INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
UNI EN 1092-1 : 2013	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 1092-1:2016-05 (Draft)	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
DIN EN 1434-2:2016-02	HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
I.S. EN 1092-1:2007	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
BS EN 267 : 2009	AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 13443-1:2007-12	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING
DIN EN 1074-6:2009-03	VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
DIN EN 14525 E : 2005	DUCTILE IRON WIDE TOLERANCE COULINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U, PE, FIBRE-CEMENT
DIN EN 331:2016-04	MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
DIN EN 676:2012-03 (Draft)	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 14812 E : 2007	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 1514-2:2014-12	Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
BS EN 1074-1:2000	Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements
BS EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
BS EN 969:2009	Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
UNE-EN 12842:2013	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
UNE-EN 1514-2:2014	Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
UNE-EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
DIN EN 12309-2 E : 2016	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
UNI EN 267 : 2011	AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
ONORM EN 676 : 2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
I.S. EN 12569:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
EN 12569:1999/AC:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
UNI EN 1591-1 : 2014	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
UNI EN 14268 : 2006	IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
UNI EN 13774 : 2013	VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
UNI EN 14525 : 2005	DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
UNI EN 12842 : 2012	DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS
UNI EN 969 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
UNI EN 13789 : 2010	INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
I.S. EN 14525:2005	DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT
UNI EN 14382 : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN 545 : 2010	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
UNI EN ISO 23553-1 : 2014	SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
UNI EN 12953-2 : 2012	SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 14384 : 2006	PILLAR FIRE HYDRANTS
BS EN 1171:2015	Industrial valves. Cast iron gate valves
UNI EN 598 : 2009	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
UNI EN 676 : 2008	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
UNI EN 1074-6 : 2009	VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS
DIN EN 16678 E : 2016	SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
DIN EN 15502-1:2015-10	Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015)
14/30282872 DC : 0	BS EN 1171 - INDUSTRIAL VALVES - CAST IRON GATE VALVES
12/30236280 DC : 0	BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
ISO 2531:2009	Ductile iron pipes, fittings, accessories and their joints for water applications
16/30336440 DC : DRAFT MAR 2016	BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
PREN 1434-2 : DRAFT 2014	HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
PREN 12953-3 : DRAFT 2013	SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
BS EN 1515-4:2009	Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
PREN 593 : DRAFT 2016	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 1514-2 : DRAFT 2013	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
PREN 676 : DRAFT 2012	FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DD CEN/TS 1591-3:2007	Flanges and their joints. Design rules for gasketed circular flange connections Calculation method for metal to metal contact type flanged joint
14/30268888 DC : 0	BS ISO 16631 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS COMPATIBLE WITH PLASTIC (PVC AND PE) PIPING SYSTEMS FOR WATER APPLICATIONS
BS EN 12516-4 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
08/30173031 DC : DRAFT JAN 2008	BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
08/30179182 DC : DRAFT MAY 2008	BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES
I.S. EN 334:2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 1515-4 E : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
UNE-EN 12516-4:2016	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
I.S. EN ISO 23553-1:2014	SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
I.S. EN 60534-5:2004	INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING
PREN 331 : DRAFT 2013	MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS
ISO 19240:2017	Industrial valves — Lined metal quarter turn and check valves for chemical process and related industries
EN 1092-1:2018	Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
16/30334290 DC : 0	BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
ISO 7186:2011	Ductile iron products for sewerage applications
EN 12480:2018	Gas meters - Rotary displacement gas meters
I.S. EN 12480:2018	GAS METERS - ROTARY DISPLACEMENT GAS METERS
I.S. EN 267:2009	AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS
DIN EN 13789:2010-09	Industrial valves - Cast iron globe valves
DIN EN 14652 E : 2007	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 969:2009-07	DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES - REQUIREMENTS AND TEST METHODS
DIN EN 13774:2013-05	VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
BS EN 13789:2002	Industrial valves. Cast iron globe valves
BS EN 13774:2013	Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
BS EN 14268:2005	Irrigation techniques. Meters for irrigation water
EN 16767:2016	Industrial valves - Steel and cast iron check valves
BS EN 12094-5:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators
BS EN 1514-2:2014	Flanges and their joints. Gaskets for PN-designated flanges Spiral wound gaskets for use with steel flanges
BS EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
BS EN 13959:2004	Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D
BS EN 13836:2006	Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW
UNE-EN 1074-6:2011	Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
BS EN 13397:2002	Industrial valves. Diaphragm valves made of metallic materials
UNE-EN 12953-2:2013	Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
UNE-EN 13774:2013	Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
UNE-EN 1515-4:2010	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
12/30250105 DC : 0	BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
BS EN 331:2015	Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
BS EN 14652 : 2005	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
BS EN 12569:1999	Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
DIN EN 12309-2:2016-04	GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
BS EN 1514-6:2003	Flanges and their joints. Dimensions of gaskets for PN-designated flanges Covered serrated metal gaskets for use with steel flanges
UNE-EN 1591-1:2014	Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
BS EN 676 : 2003	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
BS EN 12953-3:2016	Shell boilers Design and calculation for pressure parts
UNE-EN 12309-2:2015	Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety
BS EN 1074-6:2008	Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants
BS EN 13434:2006	Devices to prevent pollution by backflow of potable water. Mechanical disconnector, hydraulic actuated. Family G, type B
DIN EN 676:2008-11	Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
EN 1515-4:2009	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 14652:2005+A1:2007	Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing
EN 14812:2005+A1:2007	Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing
EN 13774:2013	Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 16678:2015	Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 15420:2010	Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW
EN 969:2009	Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
EN 1514-7:2004	Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
EN 14382:2005+A1:2009/AC:2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 14525:2004	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement
EN 14384:2005	Pillar fire hydrants
EN 14339:2005	Underground fire hydrants
EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
EN 13836:2006	Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW
EN 12334:2001/A1:2004	INDUSTRIAL VALVES - CAST IRON CHECK VALVES
EN 598:2007+A1:2009	Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
EN 13789:2010	Industrial valves - Cast iron globe valves
EN 334:2005+A1:2009	Gas pressure regulators for inlet pressures up to 100 bar
EN 1591-1:2013	Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 13959:2004	Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D
EN 1514-8:2004	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
EN 14268:2005/AC:2007	IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER
EN 593:2017	Industrial valves - Metallic butterfly valves for general purposes
EN 1514-6:2003	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
EN 14267:2004/AC:2008	IRRIGATION TECHNIQUES - IRRIGATION HYDRANTS
EN 331:2015	Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
09/30205886 DC : 0	BS EN 13789 - INDUSTRIAL VALVES - CAST IRON GLOBE VALVES
09/30185187 DC : 0	BS ISO 7186 - DUCTILE IRON PRODUCTS FOR SEWAGE APPLICATIONS
05/30131069 DC : DRAFT MAR 2005	EN 598:2005 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR SEWERAGE APPLICATIONS - REQUIREMENTS AND TEST METHODS
DIN EN 15420:2011-03	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1 000 KW
S.R. CEN/TS 1591-3:2007	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT
11/30243885 DC : 0	BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS
08/30181473 DC : DRAFT JULY 2008	BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS
DIN 14244:2003-07	Water suction connection for fire fighting - Under and above ground
16/30339483 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
16/30335252 DC : 0	BS ISO 19240 - INDUSTRIAL VALVES - LINED METAL QUARTER TURN AND CHECK VALVES FOR CHEMICAL PROCESS AND RELATED INDUSTRIES
DIN EN 16767:2016-08	INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
DIN EN 1515-4:2010-04	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
13/30278752 DC : 0	BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY
BS ISO 2531:2009	Ductile iron pipes, fittings, accessories and their joints for water applications
DIN EN 16678:2016-02	Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
PREN 15502-1 : DRAFT 2010	GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 15502-1 : 2012	GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 16678:2015	SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
I.S. EN 1434-2:2015	HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS
17/30362692 DC : 0	BS EN 598 - COATED AND LINED DUCTILE IRON PIPES, FITTINGS AND THEIR JOINTS FOR SEWERAGE AND DRAINAGE APPLICATIONS - PRODUCTS CHARACTERISTICS AND TEST AND ASSESSMENT METHODS
S.R. CLC/TS 50537-3:2010	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
I.S. EN 676:2003	AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
DIN EN 1514-1:1997-08	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKET FOR PN-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS
DIN EN 13397:2002-03	INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS
DIN EN 1514-7 E : 2004	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 7: COVERED METAL JACKETED GASKETS FOR USE WITH STEEL FLANGES
DIN EN 12953-2:2012-05	Shell boilers - Part 2: Materials for pressure parts of boilers and accessories
DIN EN 14339 E : 2005	UNDERGROUND FIRE HYDRANTS
DIN EN 14384 E : 2005	PILLAR FIRE HYDRANTS
UNE-EN 1171:2016	Industrial valves - Cast iron gate valves
BS EN 12953-2:2012	Shell boilers Materials for pressure parts of boilers and accessories
BS EN 14339:2005	Underground fire hydrants
BS EN 12309-2:2015	Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety
BS EN 12842:2012	Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods
BS EN 14384:2005	Pillar fire hydrants
BS EN 13433:2007	Devices to prevent pollution by backflow of potable water. Mechanical disconnector, direct actuated. Family G, type A
DIN EN 14812:2007-09	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - CHEMICAL DOSING SYSTEMS - PRE-SET DOSING SYSTEMS - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
EN 13397:2001	Industrial valves - Diaphragm valves made of metallic materials
EN 1074-6:2008	Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
UNI EN 1514-2 : 2014	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
EN 1171:2015	Industrial valves - Cast iron gate valves
EN 13434:2006	Devices to prevent pollution by backflow of potable water - Mechanical disconnector, hydraulic actuated - Family G, type B
DIN EN 14652:2007-09	WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MEMBRANE SEPARATION DEVICES - REQUIREMENTS FOR PERFORMANCE, SAFETY AND TESTING
DIN EN 13959:2005-01	Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
EN 15502-1:2012+A1:2015	Gas-fired heating boilers - Part 1: General requirements and tests
DIN EN 14525:2005-02	Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement
EN 1074-1:2000	Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
DIN EN 15420:2011-11	GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW
DIN EN 545:2011-09	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
DIN EN 1514-8:2005-02	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
DIN EN 13836:2007-06	Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW
DIN EN 1514-7:2004-08	Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
EN 60534-3-2:2001	Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
UNE-EN 15502-1:2013	Gas-fired heating boilers - Part 1: General requirements and tests

Standards Referencing This Book - (Show below) - (Hide below)

ISO 7005-2:1988	Metallic flanges — Part 2: Cast iron flanges
ISO 5922:2005	Malleable cast iron
EN ISO 9002:1994/AC:1997	QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
ISO 6708:1995	Pipework components Definition and selection of DN (nominal size)
ISO 887:2000	Plain washers for metric bolts, screws and nuts for general purposes General plan
PREN 1092-1 : DRAFT 2016	FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
ISO 9002:1994	Quality systems — Model for quality assurance in production, installation and servicing
ISO 2632-3:1979	Roughness comparison specimens Part 3: Cast surfaces
ISO 13:1978	Grey iron pipes, special castings and grey iron parts for pressure main lines
EN ISO 6708:1995	Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
ISO 468:1982	Surface roughness — Parameters, their values and general rules for specifying requirements
EN 1333:2006	Flanges and their joints - Pipework components - Definition and selection of PN
ISO 185:2005	Grey cast irons Classification
EN 545:2010	Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
ISO 2531:2009	Ductile iron pipes, fittings, accessories and their joints for water applications
ISO 5458:1998	Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart