|
13/30255705 DC : 0
|
BS EN 1514-2 - FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
|
BS EN 15420:2010
|
Gas-fired central heating boilers. Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1000 kW |
|
BS EN 16678:2015
|
Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
13/30279702 DC : 0
|
BS EN 331 - MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
|
05/30134037 DC : 0
|
EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
BS EN 593:2017
|
Industrial valves. Metallic butterfly valves for general purposes |
|
14/30291756 DC : 0
|
BS EN 1434-2 - HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
|
16/30345752 DC : 0
|
BS EN 12516-4:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
DIN CEN/TS 13547:2007-02
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
04/30121918 DC : DRAFT SEP 2004
|
EN 1591-3 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT |
|
I.S. EN 1515-4:2009
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
|
UNE-EN 13547:2014
|
Industrial valves - Copper alloy ball valves |
|
I.S. EN 378-2:2016
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
|
I.S. EN 15420:2010
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
|
I.S. EN 13547:2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
I.S. EN 15502-1:2012
|
GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
ISO 10631:2013
|
Metallic butterfly valves for general purposes |
|
UNE-EN 16678:2016
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
16/30334287 DC : 0
|
BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
|
DIN EN 334:2016-05 (Draft)
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
I.S. EN 14382:2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
EN 676:2003+A2:2008/AC:2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
DIN EN 1514-2 E : 2014
|
FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
|
DIN EN 1591-1:2014-04
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
|
EN 12309-2:2015/AC:2015
|
GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
|
DIN EN 1514-8 E : 2005
|
FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 8: POLYMERIC O-RING GASKETS FOR GROOVED FLANGES |
|
DIN EN 1514-6 E : 2004
|
FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 6: COVERED SERRATED METAL GASKETS FOR USE WITH STEEL FLANGES |
|
DIN EN ISO 23553-1:2014-09
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
|
DIN EN 14382 E : 2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
UNE-EN 378-2:2017
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
|
BS EN 12288:2010
|
Industrial valves. Copper alloy gate valves |
|
UNE-EN 331:2016
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
BS EN 14382 : 2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
I.S. EN 12288:2010
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
EN 12094-5:2006
|
Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
|
EN 12288:2010
|
Industrial valves - Copper alloy gate valves |
|
CEN/TS 1591-3:2007
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint |
|
EN 13443-1:2002+A1:2007
|
Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing |
|
EN 13547:2013
|
Industrial valves - Copper alloy ball valves |
|
EN 1349:2009
|
Industrial process control valves |
|
EN 12953-3:2016
|
Shell boilers - Part 3: Design and calculation for pressure parts |
|
CEN/TS 13547:2006
|
Industrial valves - Copper alloy ball valves |
|
BS EN 1349:2009
|
Industrial process control valves |
|
PREN 13774 : DRAFT 2011
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
13/30288560 DC : 0
|
BS EN 12953-3 - SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS |
|
09/30202316 DC : 0
|
BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
|
13/30286091 DC : 0
|
BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
|
DIN EN 15001-1:2011-02
|
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
|
PREN 14382 : DRAFT 2016
|
GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
|
NF EN 15420 : 2012
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
|
I.S. EN 593:2017
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
UNI EN 1515-4 : 2010
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
|
BS ISO 10631:2013
|
Metallic butterfly valves for general purposes |
|
DIN EN 15502-1:2015-10
|
Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015) |
|
11/30249111 DC : 0
|
BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
04/30117386 DC : DRAFT JUL 2004
|
EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
PREN 12309-2 : DRAFT 2013
|
GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
|
DD CEN/TS 13547:2006
|
Industrial valves. Copper alloy ball valves |
|
ONORM EN 334 : JUN 2009
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
UNE-EN 15420:2012
|
Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW |
|
EN 1434-2:2015
|
Heat meters - Part 2: Constructional requirements |
|
DIN EN 12516-4:2015-01
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
EN 12516-4:2014
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
|
UNE-EN 1434-2:2016
|
Heat meters - Part 2: Constructional requirements |
|
EN 267:2009+A1:2011
|
Automatic forced draught burners for liquid fuels |
|
DIN EN 12288:2010-10
|
Industrial valves - Copper alloy gate valves |
|
DIN EN 14382:2016-05 (Draft)
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
DIN EN 267:2012-03 (Draft)
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
|
DIN EN 267:2011-11
|
Automatic forced draught burners for liquid fuels |
|
DIN EN 1514-6:2004-03
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 1514-6:2003 |
|
BS EN 334 : 2005
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
BS EN 13443-1:2002
|
Water conditioning equipment inside buildings. Mechanical filters Particle rating 80 μm to 150 μm. Requirements for performances, safety and testing |
|
BS EN 1591-1:2013
|
Flanges and their joints. Design rules for gasketed circular flange connections Calculation |
|
BS EN 1514-8:2004
|
Flanges and their joints. Dimensions of gaskets for PN-designated flanges Polymeric O-Ring gaskets for grooved flanges |
|
BS EN 1514-7:2004
|
Flanges and their joints. Dimensions of gaskets for PN-designated flanges Covered metal jacketed gaskets for use with steel flanges |
|
UNE-EN 593:2009
|
Industrial valves - Metallic butterfly valves |
|
I.S. EN 12953-3:2016
|
SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS |
|
I.S. EN 13774:2013
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
I.S. EN 1514-2:2014
|
FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
|
I.S. EN 331:2015
|
MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
|
I.S. EN 12094-5:2006
|
FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS |
|
EN 1514-2:2014
|
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
|
I.S. EN 1349:2009
|
INDUSTRIAL PROCESS CONTROL VALVES |
|
I.S. EN 12309-2:2015
|
GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
|
I.S. EN 13443-1:2002
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 MICROMETER TO 150 MICROMETER - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
|
I.S. EN 1591-1:2013
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
|
UNI EN 1349 : 2010
|
INDUSTRIAL PROCESS CONTROL VALVES |
|
VDI 3805 Blatt 1:2011-10
|
Product data exchange in the Building Services - Fundamentals |
|
VDI 2200:2007-06
|
Tight flange connections - Selection, calculation, design and assembly of bolted flange connections |
|
VDI 2290:2012-06
|
Emission control - Sealing constants for flange connections |
|
DIN EN 15092:2008-09
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
|
BS EN 15092:2008
|
Building valves. Inline hot water supply tempering valves. Tests and requirements |
|
PREN 12516-4 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
10/30218092 DC : 0
|
BS EN 15502-1 - GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
06/30149018 DC : 0
|
EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
I.S. EN 15092:2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
|
12/30257298 DC : 0
|
BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
12/30247796 DC : DRAFT JAN 2012
|
BS EN 1591-1 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATIONS |
|
13/30291774 DC : 0
|
BS EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
|
12/30258099 DC
|
BS EN 267. Forced draught burners for liquid fuels |
|
09/30205880 DC : DRAFT OCT 2009
|
BS EN 12288 - INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
DIN EN 15420 E : NOV 2011
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
|
NF EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
|
UNI EN 15420 : 2011
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
|
EN 378-2:2016
|
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
|
UNI EN 1092-1 : 2013
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
DIN EN 1092-1:2016-05 (Draft)
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
DIN EN 1434-2:2016-02
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
|
UNI EN 13547 : 2013
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
I.S. CEN TS 13547:2006
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
I.S. EN 1092-1:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
BS EN 267 : 2009
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
|
DIN EN 13443-1:2007-12
|
WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
|
DIN EN 331:2016-04
|
MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
|
DIN EN 676:2012-03 (Draft)
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
DIN EN 1514-2:2014-12
|
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
|
UNE-EN 1514-2:2014
|
Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
|
UNE-EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
|
DIN EN 12309-2 E : 2016
|
GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
|
UNI EN 267 : 2011
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
|
ONORM EN 676 : 2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
UNI EN 1591-1 : 2014
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
|
UNI EN 12288 : 2010
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
UNI EN 13774 : 2013
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
UNI EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
|
UNI EN 14382 : 2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
UNI EN ISO 23553-1 : 2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
|
UNI EN 676 : 2008
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
DIN EN 13547:2013-12
|
INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES |
|
DIN EN 16678 E : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
|
12/30236280 DC : 0
|
BS ISO 10631 - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
PREN 1434-2 : DRAFT 2014
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
|
16/30336440 DC : DRAFT MAR 2016
|
BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
|
16/30339483 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
BS EN 13547:2013
|
Industrial valves. Copper alloy ball valves |
|
07/30160488 DC : DRAFT FEB 2007
|
BS EN 13443-1 AMD 1 - WATER CONDITIONING EQUIPMENT INSIDE BUILDINGS - MECHANICAL FILTERS - PART 1: PARTICLE RATING 80 [MU]M TO 150 [MU]M - REQUIREMENTS FOR PERFORMANCES, SAFETY AND TESTING |
|
PREN 12953-3 : DRAFT 2013
|
SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS |
|
BS EN 1515-4:2009
|
Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
PREN 593 : DRAFT 2016
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
|
PREN 1514-2 : DRAFT 2013
|
FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
|
PREN 676 : DRAFT 2012
|
FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
DD CEN/TS 1591-3:2007
|
Flanges and their joints. Design rules for gasketed circular flange connections Calculation method for metal to metal contact type flanged joint |
|
BS EN 12516-4 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
08/30173031 DC : DRAFT JAN 2008
|
BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
|
08/30179182 DC : DRAFT MAY 2008
|
BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
|
I.S. EN 334:2005
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
PREN 378-2 : DRAFT 2013
|
REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION |
|
UNI EN 12516-4 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
DIN EN 1515-4 E : 2010
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
|
BS EN 1434-2 : 2015
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
|
UNE-EN 12516-4:2016
|
Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
|
I.S. EN ISO 23553-1:2014
|
SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
|
I.S. EN 60534-5:2004
|
INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING |
|
PREN 331 : DRAFT 2013
|
MANUALLY OPERATED BALL VALVES AND CLOSED BOTTOM TAPER PLUG VALVES FOR GAS INSTALLATIONS FOR BUILDINGS |
|
PREN 12288 : DRAFT 2009
|
INDUSTRIAL VALVES - COPPER ALLOY GATE VALVES |
|
16/30334290 DC : 0
|
BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
|
EN 12480:2018
|
Gas meters - Rotary displacement gas meters |
|
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
|
I.S. EN 267:2009
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR LIQUID FUELS |
|
DIN EN 13774:2013-05
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
BS EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
|
UNE-EN 15001-1:2010
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
|
BS EN 12094-5:2006
|
Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators |
|
BS EN 1514-2:2014
|
Flanges and their joints. Gaskets for PN-designated flanges Spiral wound gaskets for use with steel flanges |
|
BS EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
|
BS EN 13959:2004
|
Anti-pollution check valves. DN 6 to DN 250 inclusive Family E, type A, B, C, and D |
|
BS EN 13836:2006
|
Gas fired central heating boilers. Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW |
|
UNE-EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
|
UNE-EN 1515-4:2010
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
12/30250105 DC : 0
|
BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
|
ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
|
BS EN 331:2015
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
DIN EN 12309-2:2016-04
|
GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
|
BS EN 1514-6:2003
|
Flanges and their joints. Dimensions of gaskets for PN-designated flanges Covered serrated metal gaskets for use with steel flanges |
|
UNE-EN 1591-1:2014
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
|
BS EN 378-2:2016
|
Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
|
BS EN 676 : 2003
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
BS EN 12953-3:2016
|
Shell boilers Design and calculation for pressure parts |
|
UNE-EN 12309-2:2015
|
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 2: Safety |
|
DIN EN 676:2008-11
|
Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008) |
|
EN 1515-4:2009
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
EN 15092:2008
|
Building valves - Inline hot water supply tempering valves - Tests and requirements |
|
EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
|
EN 15420:2010
|
Gas-fired central heating boilers - Type C boilers of nominal heat input exceeding 70 kW, but not exceeding 1 000 kW |
|
EN 16678:2015
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
EN 15001-1:2009
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
|
EN 1514-7:2004
|
Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
|
EN 14382:2005+A1:2009/AC:2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
|
EN 13836:2006
|
Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1 000 kW |
|
EN ISO 23553-1:2014
|
Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
|
EN 1591-1:2013
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
|
EN 334:2005+A1:2009
|
Gas pressure regulators for inlet pressures up to 100 bar |
|
EN 13959:2004
|
Anti-pollution check valves - DN 6 to DN 250 inclusive family E, type A, B, C and D |
|
EN 1514-8:2004
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges |
|
EN 593:2017
|
Industrial valves - Metallic butterfly valves for general purposes |
|
EN 1514-6:2003
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges |
|
EN 331:2015
|
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
|
I.S. EN 15001-1:2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
|
DIN EN 15092 E : 2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
|
08/30187521 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
|
DIN EN 15420:2011-03
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1 000 KW |
|
S.R. CEN/TS 1591-3:2007
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT |
|
11/30243885 DC : 0
|
BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
|
10/30227098 DC : 0
|
BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE |
|
I.S. EN 12516-4:2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL |
|
BS EN 15001-1:2009
|
Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
|
UNI EN 15092 : 2008
|
BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS |
|
DIN EN 1515-4:2010-04
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
|
13/30278752 DC : 0
|
BS EN 12309-2 - GAS-FIRED SORPTION APPLIANCES FOR HEATING AND/OR COOLING WITH A NET HEAT INPUT NOT EXCEEDING 70 KW - PART 2: SAFETY |
|
DIN EN 16678:2016-02
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
|
PREN 15502-1 : DRAFT 2010
|
GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
BS EN 15502-1 : 2012
|
GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS |
|
UNI EN 334 : 2009
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
|
EN 1092-1:2018
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
|
I.S. EN 16678:2015
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
|
I.S. EN 1434-2:2015
|
HEAT METERS - PART 2: CONSTRUCTIONAL REQUIREMENTS |
|
ISO 5149-2:2014
|
Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation |
|
I.S. EN 676:2003
|
AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
|
DIN EN 1514-7 E : 2004
|
FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 7: COVERED METAL JACKETED GASKETS FOR USE WITH STEEL FLANGES |
|
BS ISO 5149-2:2014
|
Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation |
|
BS EN 12309-2:2015
|
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW Safety |
|
UNI EN 1514-2 : 2014
|
FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
|
DIN EN 13959:2005-01
|
Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004 |
|
EN 15502-1:2012+A1:2015
|
Gas-fired heating boilers - Part 1: General requirements and tests |
|
DIN EN 15420:2011-11
|
GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT EXCEEDING 70 KW, BUT NOT EXCEEDING 1000 KW |
|
DIN EN 1514-8:2005-02
|
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges |
|
DIN EN 13836:2007-06
|
Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW |
|
DIN EN 1514-7:2004-08
|
Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
|
UNE-EN 15502-1:2013
|
Gas-fired heating boilers - Part 1: General requirements and tests |