EN 1092-4:2002

Current

Current The latest, up-to-date edition.

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges

Available format(s):

Language(s):

Published date: 29-05-2002

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
  4.1 Range of DN
  4.2 Range of PN designations
  4.3 Types of flanges
  4.4 Designation of flanges
5 General requirements
  5.1 Flange materials
  5.2 Repairs
  5.3 Bolting
  5.4 Gaskets
  5.5 Pressure temperature (p/T) ratings
  5.6 Dimensions
  5.7 Flange facings
  5.8 Spot facing and back facing of flanges
  5.9 Tolerances
  5.10 Marking
Figures
Annex A (informative) Masses of flanges
Annex ZA (informative) Clauses of this European Standard
         addressing essential requirements (ER's) or other
         provisions of EU Directives
Tables

Abstract - (Show below) - (Hide below)

This standard specifies requirements for PN designated circular flanges for pipes, valves, fittings and accessories made from aluminium alloy in the range of DN 15 to DN 600 and PN10 to PN 63 (see Table 1).This standard specifies the types of flanges and their facings, dimensions and tolerances, bolt sizes, surface finish of jointing faces, marking and materials together with associated pressure/temperature (p/T) ratings.The flanges are intended to be used for piping as well as for pressure vessels.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 74
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
NS EN 1092-4 : 1ED 2002	Identical
BS EN 1092-4:2002	Identical
SN EN 1092-4 : 2002	Identical
DIN EN 1092-4:2002-08	Identical
NBN EN 1092-4 : 2002	Identical
UNE-EN 1092-4:2002	Identical
UNI EN 1092-4 : 2004	Identical
NF EN 1092-4 : 2002	Identical
I.S. EN 1092-4:2002	Identical
NEN EN 1092-4 : 2002	Identical
PN EN 1092-4 : 2005	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

13/30255705 DC : 0	BS EN 1514-2 - FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
BS EN 16678:2015	Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
DD CLC/TS 50537-2:2010	Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors
UNI EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
05/30134037 DC : 0	EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
BS EN 593:2017	Industrial valves. Metallic butterfly valves for general purposes
DD CLC/TS 50537-3:2010	Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters
16/30345752 DC : 0	BS EN 12516-4:2014/A1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
04/30121918 DC : DRAFT SEP 2004	EN 1591-3 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT
I.S. EN 1515-4:2009	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
CEI CLC/TS 50537-2 : 2011	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
S.R. CLC/TS 50537-2:2010	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
I.S. EN 1474-1:2008	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 15502-1:2012	GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
UNE-EN 16678:2016	Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
16/30334287 DC : 0	BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
DIN EN 334:2016-05 (Draft)	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
I.S. EN 14382:2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 13480-8:2017	Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 13480-8:2017+A1:2019	Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
DIN EN 1514-2 E : 2014	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
DIN EN 1591-1:2014-04	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
DIN EN 1514-8 E : 2005	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 8: POLYMERIC O-RING GASKETS FOR GROOVED FLANGES
DIN EN 1514-6 E : 2004	FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 6: COVERED SERRATED METAL GASKETS FOR USE WITH STEEL FLANGES
DIN EN ISO 23553-1:2014-09	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
DIN EN 14382 E : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
BS EN 14382 : 2005	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN 12094-5:2006	Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
CEN/TS 1591-3:2007	Flanges and their joints - Design rules for gasketed circular flange connections - Part 3: Calculation method for metal to metal contact type flanged joint
EN 12953-3:2016	Shell boilers - Part 3: Design and calculation for pressure parts
DIN EN 15502-1:2015-10	Gas-fired heating boilers - Part 1: General requirements and tests (includes Amendment A1:2015)
09/30202316 DC : 0	BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
13/30288560 DC : 0	BS EN 12953-3 - SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
13/30286091 DC : 0	BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
PREN 14382 : DRAFT 2016	GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
I.S. EN 593:2017	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
UNI EN 1515-4 : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
CLC/TS 50537-2:2010	Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors
11/30249111 DC : 0	BS EN 12516-4 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
CLC/TS 50537-3:2010	Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters
04/30117386 DC : DRAFT JUL 2004	EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
ONORM EN 334 : JUN 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
DIN EN 12516-4:2015-01	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
EN 12516-4:2014	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
DIN EN 14382:2016-05 (Draft)	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
DIN EN 1514-6:2004-03	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 1514-6:2003
BS EN 334 : 2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
BS EN 1591-1:2013	Flanges and their joints. Design rules for gasketed circular flange connections Calculation
BS EN 1514-8:2004	Flanges and their joints. Dimensions of gaskets for PN-designated flanges Polymeric O-Ring gaskets for grooved flanges
BS EN 1514-7:2004	Flanges and their joints. Dimensions of gaskets for PN-designated flanges Covered metal jacketed gaskets for use with steel flanges
UNE-EN 593:2009	Industrial valves - Metallic butterfly valves
I.S. EN 12953-3:2016	SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
I.S. EN 1514-2:2014	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
I.S. EN 12094-5:2006	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR HIGH AND LOW PRESSURE SELECTOR VALVES AND THEIR ACTUATORS
EN 1514-2:2014	Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
I.S. EN 13480-8:2017&LC:2019	METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
I.S. EN 1591-1:2013	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
VDI 3805 Blatt 1:2011-10	Product data exchange in the Building Services - Fundamentals
VDI 2200:2007-06	Tight flange connections - Selection, calculation, design and assembly of bolted flange connections
CEI CLC/TS 50537-3 : 2011	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
12/30260023 DC : 0	BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
PREN 12516-4 : DRAFT 2011	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
10/30218092 DC : 0	BS EN 15502-1 - GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
06/30149018 DC : 0	EN 15502-1 - GAS-FIRED CENTRAL HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
03/107351 DC : DRAFT APR 2003	EN 1514-2 - FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
12/30247796 DC : DRAFT JAN 2012	BS EN 1591-1 - FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATIONS
17/30347443 DC : DRAFT JUN 2017	BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
05/30114218 DC : DRAFT FEB 2005	EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
UNI EN 334 : 2009	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNE-EN 13480-8:2017	Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)
PREN 13480-8 : DRAFT 2012	METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
DIN EN 1514-2:2014-12	Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
UNE-EN 1514-2:2014	Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
UNE-EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
EN 1474-1:2008	Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
UNI EN 1591-1 : 2014	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION
UNI EN 14382 : 2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
UNI EN ISO 23553-1 : 2014	SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
DIN EN 16678 E : 2016	SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
DIN EN 1474-1:2009-03	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
16/30339483 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 12953-3 : DRAFT 2013	SHELL BOILERS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS
BS EN 1474-1:2008	Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
BS EN 1515-4:2009	Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
PREN 593 : DRAFT 2016	INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES
PREN 1514-2 : DRAFT 2013	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
DD CEN/TS 1591-3:2007	Flanges and their joints. Design rules for gasketed circular flange connections Calculation method for metal to metal contact type flanged joint
BS EN 12516-4 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
08/30173031 DC : DRAFT JAN 2008	BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
I.S. EN 334:2005	GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
UNI EN 12516-4 : 2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN EN 1515-4 E : 2010	FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
UNE-EN 12516-4:2016	Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
I.S. EN ISO 23553-1:2014	SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
I.S. EN 60534-5:2004	INDUSTRIAL-PROCESS CONTROL VALVES - PART 5: MARKING
16/30334290 DC : 0	BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
EN 12480:2018	Gas meters - Rotary displacement gas meters
I.S. EN 12480:2018	GAS METERS - ROTARY DISPLACEMENT GAS METERS
BS EN 12094-5:2006	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for high and low pressure selector valves and their actuators
BS EN 1514-2:2014	Flanges and their joints. Gaskets for PN-designated flanges Spiral wound gaskets for use with steel flanges
BS EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
UNE-EN 1515-4:2010	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
12/30250105 DC : 0	BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
BS EN 1514-6:2003	Flanges and their joints. Dimensions of gaskets for PN-designated flanges Covered serrated metal gaskets for use with steel flanges
UNE-EN 1591-1:2014	Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
BS EN 12953-3:2016	Shell boilers Design and calculation for pressure parts
EN 1515-4:2009	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
EN 16678:2015	Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
EN 1514-7:2004	Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
EN 14382:2005+A1:2009/AC:2009	SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
EN 334:2005+A1:2009	Gas pressure regulators for inlet pressures up to 100 bar
EN 1591-1:2013	Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
EN 1514-8:2004	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
EN 593:2017	Industrial valves - Metallic butterfly valves for general purposes
EN 1514-6:2003	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
EN 13480-8:2017	Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
08/30187521 DC : 0	BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
S.R. CEN/TS 1591-3:2007	FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 3: CALCULATION METHOD FOR METAL TO METAL CONTACT TYPE FLANGED JOINT
I.S. EN 12516-4:2014	INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 4: CALCULATION METHOD FOR VALVE SHELLS MANUFACTURED IN METALLIC MATERIALS OTHER THAN STEEL
DIN EN 1515-4:2010-04	Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
DIN EN 16678:2016-02	Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
PREN 15502-1 : DRAFT 2010	GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 15502-1 : 2012	GAS-FIRED HEATING BOILERS - PART 1: GENERAL REQUIREMENTS AND TESTS
I.S. EN 16678:2015	SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA
S.R. CLC/TS 50537-3:2010	RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
DIN EN 1514-7 E : 2004	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 7: COVERED METAL JACKETED GASKETS FOR USE WITH STEEL FLANGES
UNI EN 1514-2 : 2014	FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES
EN 15502-1:2012+A1:2015	Gas-fired heating boilers - Part 1: General requirements and tests
DIN EN 1514-8:2005-02	Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges
DIN EN 1514-7:2004-08	Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
UNE-EN 15502-1:2013	Gas-fired heating boilers - Part 1: General requirements and tests

Standards Referencing This Book - (Show below) - (Hide below)

EN ISO 4287:1998/A1:2009	GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
EN 1515-1:1999	Flanges and their joints - Bolting - Part 1: Selection of bolting
ISO 4287:1997	Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 887:2000	Plain washers for metric bolts, screws and nuts for general purposes General plan
EN ISO 6708:1995	Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
EN ISO 887:2000/AC:2006	PLAIN WASHERS FOR METRIC BOLTS, SCREWS AND NUTS FOR GENERAL PURPOSES - GENERAL PLAN (ISO 887:2000)
EN 764 : 1994	PRESSURE EQUIPMENT - TERMINOLOGY AND SYMBOLS - PRESSURE, TEMPERATURE, VOLUME
EN 1333:2006	Flanges and their joints - Pipework components - Definition and selection of PN
EN 12392:2016	Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
1997/23/EC : 1997	DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart