EN 12493:2013+A1:2014/AC:2015

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE

Available format(s):

Superseded date: 12-06-2019

Language(s):

Published date: 12-01-2013

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Materials
5 Pressure vessel design
6 Openings
7 Non-pressure retaining parts
8 Workmanship and construction
9 Construction and workmanship of internal pipework
10 Manufacturing tests and examinations
11 External corrosion protection and finishing
12 Marking
13 Records and documentation
Annex A (normative) - Guidance on selection of material
        grades
Annex B (normative) - Reference temperatures for design
Annex C (informative) - Alternative reference temperatures
        for design
Annex D (normative) - Design
Annex E (informative) - Example of joints
Annex F (normative) - Allowable tolerances
Annex G (normative) - Heat treatment
Annex H (informative) - Typical method for measurement
        of shell peaking
Annex I (normative) - Welding imperfections and test
        specimens
Annex J (informative) - Choice of non-destructive test
        methods for welds
Annex K (normative) - Hydraulic pressure test
Annex L (informative) - Environmental checklist
Bibliography

Abstract - (Show below) - (Hide below)

Describes minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.

General Product Information - (Show below) - (Hide below)

Committee	TC 286
Development Note	Supersedes PREN 12493. (11/2013) 2013 Edition Re-Issued in July 2014 & incorporates AMD 1 2014. (08/2014)
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN 12493:2013+A2:2018
Supersedes	PREN 12493 : DRAFT 2013

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
I.S. EN 12493:2013+A1:2014&AC:2015	Identical
NS EN 12493 : 2013 AC 2015	Identical
SN EN 12493 : 2014 CORR 2015	Identical
NEN EN 12493 : 2013 C1 2015	Identical
NF EN 12493 : 2014 + A1 2014	Identical
BS EN 12493 : 2013	Identical
PN EN 12493 : 2014 AC 2015	Identical
DIN EN 12493:2018-08	Identical
ONORM EN 12493 : 2015	Identical
UNI EN 12493:2018	Identical
SS EN 12493:2013:A2 2018	Identical
UNI EN 12493 : 2014	Identical
DIN EN 12493:2014-03	Identical
I.S. EN 12493:2013	Identical
NF EN 12493+A2 : 2018	Identical
ÖNORM EN 12493: 2018	Identical
UNE-EN 12493:2014	Identical
NBN EN 12493 : 2014 COR 2015	Identical
DIN EN 12493:2017-01	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

11/30248687 DC : 0	BS EN 13776 - LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS
10/30216074 DC : 0	BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS
11/30253745 DC : 0	BS EN 14025 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC PRESSURE TANKS - DESIGN AND CONSTRUCTION
12/30250279 DC : 0	BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
UNE-EN 14334:2015	LPG equipment and accessories - Inspection and testing of LPG road tankers
PREN 13776 : DRAFT 2011	LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS
17/30347665 DC : 0	BS ISO 21843 - DETERMINATION OF THE RESISTANCE TO HYDROCARBON POOL FIRES OF FIRE PROTECTION MATERIALS AND SYSTEMS FOR PRESSURE VESSELS
DIN EN 12252:2014-07	LPG equipment and accessories - Equipping of LPG road tankers
DIN EN 14334:2015-01	LPG equipment and accessories - Inspection and testing of LPG road tankers
BS EN 12252:2014	LPG equipment and accessories. Equipping of LPG road tankers
DIN EN 12252:2000-10	LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 12252:2014	LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 13776:2013	LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS
I.S. EN 14334:2014	LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS
DIN EN 13776:2013-08	LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
UNI EN 14334 : 2014	LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS
UNI EN 13776 : 2013	LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS
UNI EN 12252 : 2014	LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
13/30281067 DC : 0	BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
PREN 12972 : DRAFT 2017	TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
03/118134 DC : DRAFT NOV 2003	EN 12252 - EQUIPPING OF LIQUEFIED PETROLEUM GAS (LPG) ROAD TANKERS
17/30360691 DC : 0	BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
UNE-EN 13776:2013	LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
EN 14334:2014	LPG equipment and accessories - Inspection and testing of LPG road tankers
EN 13776:2013	LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
PREN 12252 : DRAFT 2013	LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
14/30300118 DC : 0	BS EN 14334 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND TESTING OF LPG ROAD TANKERS
BS EN 14334:2014	LPG equipment and accessories. Inspection and testing of LPG road tankers
BS EN 13776:2013	LPG equipment and accessories. Filling and discharge procedures for LPG road tankers
EN 12252:2014	LPG equipment and accessories - Equipping of LPG road tankers

Standards Referencing This Book - (Show below) - (Hide below)

ISO 17636-1:2013	Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film
EN ISO 6520-1:2007	Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)
EN 444:1994	Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
EN ISO 14021:2016	Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)
EN ISO 5817:2014	Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
ISO 6520-1:2007	Welding and allied processes Classification of geometric imperfections in metallic materials Part 1: Fusion welding
EN ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN 1708-1:2010	Welding - Basic welded joint details in steel - Part 1: Pressurized components
EN 12252:2014	LPG equipment and accessories - Equipping of LPG road tankers
EN ISO 3452-1:2013	Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01)
EN ISO 6892-1:2016	Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN 10028-3:2017	Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
ISO 9712:2012	Non-destructive testing Qualification and certification of NDT personnel
EN ISO 6520-2:2013	Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013)
EN ISO 5173:2010/A1:2011	DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS (ISO 5173:2009)
ISO 14732:2013	Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
ISO 14024:1999	Environmental labels and declarations Type I environmental labelling Principles and procedures
ISO 14021:2016	Environmental labels and declarations — Self-declared environmental claims (Type II environmental labelling)
ISO 6892-1:2016	Metallic materials Tensile testing Part 1: Method of test at room temperature
EN ISO 9016:2012	Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012)
EN ISO 14732:2013	Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
ISO 5173:2009	Destructive tests on welds in metallic materials — Bend tests
EN ISO 5178:2011	Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001)
EN 10028-2:2017	Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN ISO 9712:2012	Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
ISO 17640:2017	Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
EN 1011-2:2001/A1:2003	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 2: ARC WELDING OF FERRITIC STEELS
ISO 148-1:2016	Metallic materials — Charpy pendulum impact test — Part 1: Test method
ISO 5817:2014	Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 3452-1:2013	Non-destructive testing Penetrant testing Part 1: General principles
ISO 15614-1:2017	Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
EN ISO 19232-2:2013	Non-destructive testing - Image quality of radiographs - Part 2: Determination of the image quality value using step/hole-type image quality indicators (ISO 19232-2:2013)
ISO 15609-1:2004	Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding
EN ISO 17637:2016	Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016)
EN ISO 17639:2013	Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds (ISO 17639:2003)
EN ISO 14025:2010	Environmental labels and declarations - Type III environmental declarations - Principles and procedures (ISO 14025:2006)
ISO 3834-2:2005	Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
ISO 17636-2:2013	Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors
ISO 17639:2003	Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds
EN 10204:2004	Metallic products - Types of inspection documents
ISO 9162:2013	Petroleum products — Fuels (class F) — Liquefied petroleum gases — Specifications
EN 10025-2:2004/AC:2005	HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
ISO 17637:2016	Non-destructive testing of welds Visual testing of fusion-welded joints
EN ISO 15609-1:2004	Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN ISO 17636-2:2013	Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013)
EN 462-1:1994	Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
ISO 6520-2:2013	Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 2: Welding with pressure
EN 13109:2010	LPG equipment and accessories - LPG tanks and drums - Disposal
ISO 14025:2006	Environmental labels and declarations — Type III environmental declarations — Principles and procedures
EN ISO 4136:2012	Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
ISO 9016:2012	Destructive tests on welds in metallic materials Impact tests Test specimen location, notch orientation and examination
EN 14334:2014	LPG equipment and accessories - Inspection and testing of LPG road tankers
ISO 5178:2001	Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints
ISO 19232-2:2013	Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators
ISO 4136:2012	Destructive tests on welds in metallic materials Transverse tensile test
EN ISO 148-1:2016	Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
EN 837-2:1997	Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
EN ISO 17636-1:2013	Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013)
EN 14717:2005	Welding and allied processes - Environmental check list
EN ISO 17638:2016	Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
EN 286-1:1998/A2:2005	SIMPLE UNFIRED PRESSURE VESSELS DESIGNED TO CONTAIN AIR OR NITROGEN - PART 1: PRESSURE VESSELS FOR GENERAL PURPOSES
ISO 17638:2016	Non-destructive testing of welds Magnetic particle testing
EN 287-1:2011	Qualification test of welders - Fusion welding - Part 1: Steels

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart