Skip to content
Please enter a keyword to search

  • EN 13237:2012

    Current The latest, up-to-date edition.

    Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres

    Available format(s): 

    Language(s): 

    Published date:  24-10-2012

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    Annex A (informative) - Definitions from the Directive
            94/9/EC and corrigenda
    Annex B (informative) - Significant changes between
            this European Standard and EN 13237:2003
    Annex ZA (informative) - Relationship between this
             European Standard and the Essential
             Requirements of EU Directive 94/9 EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard specifies terms and definitions (vocabulary) to be used in suitable standards dealing with equipment and protective systems intended for use in potentially explosive atmospheres.NOTEDirective 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 305
    Development Note Supersedes PREN 13237-1 (10/2005) Supersedes UNE EN 13237. (04/2015)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN ISO 80079-37 E : 2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO 80079-37:2016)
    BS EN 15089:2009 Explosion isolation systems
    I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
    DIN EN 16447 E : 2014 EXPLOSION ISOLATION FLAP VALVES
    09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    DIN EN 15794:2010-02 Determination of explosion points of flammable liquids
    16/30348296 DC : DRAFT DEC 2016 BS EN 14460 - EXPLOSION RESISTANT EQUIPMENT
    BS EN 15794:2009 Determination of explosion points of flammable liquids
    05/30134150 DC : DRAFT MAY 2005 EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
    BS EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
    NFPA 68 : 2018 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
    I.S. EN 15967:2011 DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS
    CEI EN 50495 : 2011 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    I.S. EN 16009:2011 FLAMELESS EXPLOSION VENTING DEVICES
    UNI EN 15967 : 2011 DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS
    UNE-EN 15089:2010 Explosion isolation systems
    17/30365866 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
    DIN EN 14373 E : 2006 EXPLOSION SUPPRESSION SYSTEMS
    BS EN 1755:2015 Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
    BS EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements
    BS EN 14994:2007 Gas explosion venting protective systems
    UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    BS EN 14983:2007 Explosion prevention and protection in underground mines. Equipment and protective systems for firedamp drainage
    BS EN 14797:2006 Explosion venting devices
    BS EN 14373:2005 Explosion suppression systems
    BS EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres Protection by flameproof enclosure \'d\'
    DIN EN 1127-2:2002-07 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
    DIN EN 14994:2007-05 Gas explosion venting protective systems
    DIN EN 14797:2007-03 Explosion venting devices
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
    EN 13463-3:2005 Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection by flameproof enclosure 'd'
    EN 14373:2005 Explosion suppression systems
    EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
    EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    EN ISO 80079-37:2016 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
    04/30117071 DC : DRAFT JUL 2004 EN 14994 - GAS EXPLOSION VENTING PROTECTIVE SYSTEMS
    I.S. EN 13463-1:2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    UNE-EN 50495:2010 Safety devices required for the safe functioning of equipment with respect to explosion risks
    14/30295916 DC : 0 BS EN 1839 - DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS
    I.S. EN 13463-5:2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    UNI EN 16447 : 2014 EXPLOSION ISOLATION FLAP VALVES
    PREN 14491 : DRAFT 2011 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
    12/30267131 DC : 0 BS EN 16447 - EXPLOSION ISOLATION FLAP VALVES
    11/30247683 DC : 0 PREN 14491 REV - DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
    BS EN 16020:2011 Explosion diverters
    BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
    07/30160767 DC : 0 BS EN 13463-1 - NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    13/30286132 DC : 0 BS EN 13616-2 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT CLOSURE DEVICE
    I.S. EN 15089:2009 EXPLOSION ISOLATION SYSTEMS
    S.R. CEN/TR 16829:2016 FIRE AND EXPLOSION PREVENTION AND PROTECTION FOR BUCKET ELEVATORS
    05/30127970 DC : DRAFT JAN 2005 EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
    I.S. EN 16020:2011 EXPLOSION DIVERTERS
    NF EN 15794 : 2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
    UNI EN 16009 : 2011 FLAMELESS EXPLOSION VENTING DEVICES
    PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
    UNI EN 15794 : 2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
    NF EN 1127-1 : 2011 EXPLOSIVES ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    I.S. EN 14591-4:2007 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
    DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
    DIN EN 14983 E : 2007 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - EQUIPMENT AND PROTECTIVE SYSTEMS FOR FIREDAMP DRAINAGE
    DIN EN 15233:2007-11 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
    DIN EN 15198 E : 2007 METHODOLOGY FOR THE RISK ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
    DIN EN 14491:2012-10 Dust explosion venting protective systems
    ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
    BS EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
    BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    I.S. EN 15207:2014 TANKS FOR TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
    DIN EN 1755:2016-02 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
    I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    DIN EN 13463-5:2011-10 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    I.S. EN 1127-2:2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
    DIN EN 13463-5:2004-03 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    DIN EN 13463-1:2009-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    I.S. EN 1839:2017 DETERMINATION OF THE EXPLOSION LIMITS AND THE LIMITING OXYGEN CONCENTRATION(LOC) FOR FLAMMABLE GASES AND VAPOURS
    I.S. EN 1539:2015 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
    I.S. EN 1755:2015 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    DIN EN 1539:2016-02 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
    I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
    I.S. EN 14491:2012 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
    I.S. EN 14986:2017 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    VDI 2263 Blatt 8.2:2014-12 Dust fires and dust explosions - Hazards - assessment - protective measures - Explosion suppression and combination of structural protective measures in elevators
    VDI 2263 Blatt 6:2017-08 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations
    UNE-EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
    PREN 50223 : DRAFT 2013 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
    BS EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
    13/30284894 DC : 0 BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
    BS EN ISO 80079-37:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\'
    13/30257895 DC : 0 BS EN 1755 - SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
    DIN EN ISO 80079-37:2016-12 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016)
    09/30209992 DC : 0 BS EN 16020 - EXPLOSION DIVERTERS
    DIN EN 15089:2009-07 EXPLOSION ISOLATION SYSTEMS
    12/30258755 DC : 0 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
    NF EN 50495 : 2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    UNI EN 15089 : 2009 EXPLOSION ISOLATION SYSTEMS
    05/30131803 DC : DRAFT APR 2005 EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    DIN EN 15967:2011-10 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
    ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
    ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
    I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    BS EN 1127-1:2019 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
    API 2000 : 2014 VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
    I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    DIN EN 13463-3:2005-07 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D'
    DIN EN 14994 E : 2007 GAS EXPLOSION VENTING PROTECTIVE SYSTEMS
    DIN EN 1127-2:2014-09 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
    DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
    DIN EN 14491 E : 2012 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
    UNE-EN 1755:2016 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
    BS EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
    DIN EN 15233 E : 2007 METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
    ISO 28300:2008 Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks
    DIN EN 15198:2007-11 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
    BS EN 1539:2015 Dryers and ovens, in which flammable substances are released. Safety requirements
    18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
    I.S. EN 13463-3:2005 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 3: PROTECTION BY FLAMEPROOF ENCLOSURE 'D'
    UNE-EN 13463-5:2013 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    UNI EN 15207 : 2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
    UNI EN 13463-1 : 2009 NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS
    UNI EN 13463-5 : 2011 NON-ELECTRICAL EQUIPMENT INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 5: PROTECTION BY CONSTRUCTIONAL SAFETY 'C'
    UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    ONORM EN 14373 : 2006 EXPLOSION SUPPRESSION SYSTEMS
    UNI EN 1127-2 : 2014 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
    UNI EN 14591-4 : 2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
    UNI EN ISO 28300 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
    UNI EN 14491 : 2012 DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
    UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    UNE-EN 50223:2016 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
    BS EN 16447:2014 Explosion isolation flap valves
    PREN 1839 : DRAFT 2014 DETERMINATION OF EXPLOSION LIMITS OF GASES AND VAPOURS AND DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION (LOC) FOR FLAMMABLE GASES AND VAPOURS
    13/30286135 DC : 0 BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
    04/30125922 DC : 0 EN 15089 - EXPLOSION ISOLATION SYSTEMS
    09/30208493 DC : 0 BS EN 16009 - FLAMELESS EXPLOSION VENTING DEVICES (TYPE C STANDARD)
    PREN 1755 : DRAFT 2013 SAFETY OF INDUSTRIAL TRUCKS - OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES - USE IN FLAMMABLE GAS, VAPOUR, MIST AND DUST
    BS EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
    DIN EN 15089 E : 2009 EXPLOSION ISOLATION SYSTEMS
    DIN EN 16447:2014-09 EXPLOSION ISOLATION FLAP VALVES
    DIN EN 14591-4:2007-09 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
    UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
    UNI EN 16020 : 2012 EXPLOSION DIVERTERS
    I.S. EN 14460:2018 EXPLOSION RESISTANT EQUIPMENT
    I.S. EN ISO 80079-37:2016 EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY ''C'', CONTROL OF IGNITION SOURCES ''B'', LIQUID IMMERSION ''K'' (ISO/DIS 80079-37:2014)
    I.S. EN 16447:2014 EXPLOSION ISOLATION FLAP VALVES
    EN 14460:2018 Explosion resistant equipment
    UNE-EN ISO 80079-37:2018 Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016)
    NF EN 16009 : 2011 FLAMELESS EXPLOSION VENTING DEVICES
    DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
    I.S. EN 15794:2009 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
    DIN EN 14797 E : 2007 EXPLOSION VENTING DEVICES
    BS EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres Protection by constructional safety \'c\'
    BS EN ISO 28300:2008 Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks
    UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    DIN EN 15207 E : 2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
    BS EN 14986:2007 Design of fans working in potentially explosive atmospheres
    BS EN 14491:2012 Dust explosion venting protective systems
    BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
    BS EN 15207:2014 Tanks for the transport of dangerous goods. Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
    UNE-EN 1539:2010 Dryers and ovens, in which flammable substances are released - Safety requirements
    UNE-EN 14986:2017 Design of fans working in potentially explosive atmospheres
    11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
    UNE-EN ISO 28300:2012 Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008)
    BS EN 1127-2:2014 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology for mining
    ISO 80079-37:2016 Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
    12/30210113 DC : 0 BS EN ISO 28300 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
    UNE-EN 13463-1:2011 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    DIN EN 15207:2015-03 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - PLUG/SOCKET CONNECTION AND SUPPLY CHARACTERISTICS FOR SERVICE EQUIPMENT IN HAZARDOUS AREAS WITH 24 V NOMINAL SUPPLY VOLTAGE
    EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
    DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
    EN 14491:2012 Dust explosion venting protective systems
    EN 14986:2017 Design of fans working in potentially explosive atmospheres
    EN 1755:2015 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
    EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
    EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
    EN 14797:2006 Explosion venting devices
    EN 16009:2011 Flameless explosion venting devices
    EN 16020:2011 Explosion diverters
    EN 1539:2015 Dryers and ovens, in which flammable substances are released - Safety requirements
    EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
    EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
    EN 15089:2009 Explosion isolation systems
    EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
    EN 16447:2014 Explosion isolation flap valves
    EN 14994:2007 Gas explosion venting protective systems
    EN 15207:2014 Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
    EN 15794:2009 Determination of explosion points of flammable liquids
    BS EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device
    17/30333169 DC : DRAFT JAN 2017 BS EN 17077 - DETERMINATION OF BURNING BEHAVIOUR OF DUST LAYERS
    09/30190323 DC : 0 BS EN 14491 - DUST EXPLOSION VENTING PROTECTIVE SYSTEMS
    DIN EN 15794 E : 2010 DETERMINATION OF EXPLOSION POINTS OF FLAMMABLE LIQUIDS
    NF EN 16020 : 2011 EXPLOSION DIVERTERS
    DIN EN ISO 28300:2008-11 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
    UNE-EN 15207:2015 Tanks for the transport of dangerous goods - Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage
    UNE-EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device
    BS EN 16009:2011 Flameless explosion venting devices
    17/30313628 DC : 0 BS EN ISO 20023 - SOLID BIOFUELS - SAFETY OF SOLID BIOFUEL PELLETS - SAFE HANDLING AND STORAGE OF WOOD PELLETS IN RESIDENTIAL AND OTHER SMALL-SCALE APPLICATIONS
    BS EN 14591-4:2007 Explosion prevention and protection in underground mines. Protective systems Automatic extinguishing systems for road headers
    DIN EN 16009:2011-10 Flameless explosion venting devices
    I.S. EN 50495:2010 SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS
    NF EN 15967 : 2011 DETERMINATION OF MAXIMUM EXPLOSION PRESSURE AND THE MAXIMUM RATE OF PRESSURE RISE OF GASES AND VAPOURS
    DIN EN 16020:2011-10 Explosion diverters
    BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
    EN 17077:2018 Determination of burning behaviour of dust layers
    I.S. EN 50223:2015 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
    DIN EN ISO 28300:2012-02 (Draft) PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS
    UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
    BS EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
    DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
    EN 1127-2:2014 Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining
    DIN EN 14373:2006-01 Explosion suppression systems
    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    I.S. EN 14373:2005 EXPLOSION SUPPRESSION SYSTEMS
    EN 14591-4:2007/AC:2008 EXPLOSION PREVENTION AND PROTECTION IN UNDERGROUND MINES - PROTECTIVE SYSTEMS - PART 4: AUTOMATIC EXTINGUISHING SYSTEMS FOR ROAD HEADERS
    EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    EN ISO 28300:2008/AC:2009 Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008/Cor 1:2009)
    DIN EN 14983:2007-06 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
    UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
    IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    EN 15089:2009 Explosion isolation systems
    EN 16009:2011 Flameless explosion venting devices
    EN 14034-2:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds
    EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
    EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
    EN 15233:2007 Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
    EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
    EN 14373:2005 Explosion suppression systems
    EN 13463-1:2009 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements
    EN 14034-3:2006+A1:2011 Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds
    ISO 4225:1994 Air quality General aspects Vocabulary
    EN 14797:2006 Explosion venting devices
    IEC 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
    EN 14983:2007 Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
    IEC 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
    IEC 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
    EN 61241-14:2004 Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
    EN 14491:2012 Dust explosion venting protective systems
    EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
    IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    EN 15198:2007 Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
    EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
    ISO 16852:2016 Flame arresters Performance requirements, test methods and limits for use
    EN 14034-1:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds
    ISO 8421-1:1987 Fire protection — Vocabulary — Part 1: General terms and phenomena of fire
    ISO 9001:2015 Quality management systems — Requirements
    EN 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
    EN 50281-2-1 : 98 COR 99 Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    EN 14522:2005 Determination of the auto ignition temperature of gases and vapours
    EN 13463-5:2011 Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c'
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    EN 14034-4:2004+A1:2011 Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
    CEN/TR 15281:2006 Guidance on Inerting for the Prevention of Explosions
    EN ISO 16852:2016 Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:2016)
    IEC 61241-14:2004 Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
    1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    EN 61508-4:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective