ISO 11070:2014
|
Sterile single-use intravascular introducers, dilators and guidewires |
EN ISO 5367:2014
|
Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) |
EN 60601-2-34:2014
|
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
EN 374-1:2003
|
Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
EN 455-1:2000
|
MEDICAL GLOVES FOR SINGLE USE - PART 1: REQUIREMENTS AND TESTING FOR FREEDOM FROM HOLES |
ISO 5364:2016
|
Anaesthetic and respiratory equipment — Oropharyngeal airways |
EN 60601-2-31:2008/A1:2011
|
MEDICAL ELECTRICAL EQUIPMENT - PART 2-31: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF EXTERNAL CARDIAC PACEMAKERS WITH INTERNAL POWER SOURCE |
EN ISO 80601-2-61:2011
|
Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) |
EN ISO 18777:2009
|
Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2005) |
EN ISO 407:2004
|
Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004) |
ISO 7376:2009
|
Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation |
EN 60601-2-24:2015
|
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
EN ISO 7886-2 : 1997
|
STERILE HYPODERMIC SYRINGES FOR SINGLE USE - SYRINGES FOR USE WITH POWER-DRIVEN SYRINGE PUMPS |
EN 1618 : 1997
|
CATHETERS OTHER THAN INTRAVASCULAR CATHETERS - TEST METHODS FOR COMMON PROPERTIES |
EN 1865-1:2010+A1:2015
|
Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment |
ISO 15002:2008
|
Flow-metering devices for connection to terminal units of medical gas pipeline systems |
ISO 8537:2016
|
Sterile single-use syringes, with or without needle, for insulin |
EN ISO 19054:2006/A1:2016
|
RAIL SYSTEMS FOR SUPPORTING MEDICAL EQUIPMENT (ISO 19054:2005/AMD 1:2016) |
EN 13718-1:2014
|
Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
MIL-DTL-26482 Revision H:2007
|
Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
EN ISO 10524-3:2006/A1:2013
|
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005/AMD 1:2013) |
EN ISO 81060-1:2012
|
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) |
EN ISO 5356-1:2015
|
Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
ISO 13688:2013
|
Protective clothing — General requirements |
IEC 60601-1:2005+AMD1:2012 CSV
|
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
EN ISO 15002:2008
|
Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008) |
ISO 10524-4:2008
|
Pressure regulators for use with medical gases — Part 4: Low-pressure regulators |
EN ISO 7376:2009
|
Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009) |
ISO 80601-2-56:2017
|
Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
ISO 81060-1:2007
|
Non-invasive sphygmomanometers — Part 1: Requirements and test methods for non-automated measurement type |
EN 3-9:2006/AC:2007
|
PORTABLE FIRE EXTINGUISHERS - PART 9: ADDITIONAL REQUIREMENTS T0 EN 3-7 FOR PRESSURE RESISTANCE OF CO[2] EXTINGUISHERS |
ISO 5356-1:2015
|
Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
EN 1865-4:2012
|
Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair |
ISO 9170-2:2008
|
Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
ISO 19054:2005
|
Rail systems for supporting medical equipment |
EN ISO 10079-2:2014
|
Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2014) |
EN 1865-2:2010+A1:2015 (edition 2)
|
Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher |
EN 794-3:1998+A2:2009
|
Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
EN ISO 10524-4:2008
|
Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008) |
EN 455-3:2015
|
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
ISO 7886-2:1996
|
Sterile hypodermic syringes for single use Part 2: Syringes for use with power-driven syringe pumps |
ISO 18777:2005
|
Transportable liquid oxygen systems for medical use — Particular requirements |
EN ISO 10555-3:2013
|
Intravascular catheters - Sterile and single-use catheters - Part 3: Central venous catheters (ISO 10555-3:2013) |
ISO 7396-2:2007
|
Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems |
EN ISO 6009:2016
|
Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016) |
ISO 5356-2:2012
|
Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors |
ISO 10079-1:2015
|
Medical suction equipment Part 1: Electrically powered suction equipment |
IEC 60601-2-34:2011
|
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
EN 3-10:2009
|
Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
EN ISO 23328-2:2009
|
Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002) |
EN 60601-2-27:2014
|
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
EN ISO 7864:2016
|
Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) |
ISO 3795:1989
|
Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
IEC 60601-2-31:2008+AMD1:2011 CSV
|
Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source |
IEC 60601-2-4:2010
|
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
ISO 5367:2014
|
Anaesthetic and respiratory equipment — Breathing sets and connectors |
ISO 7886-1:2017
|
Sterile hypodermic syringes for single use — Part 1: Syringes for manual use |
ISO 5359:2014
|
Anaesthetic and respiratory equipment Low-pressure hose assemblies for use with medical gases |
ISO 10524-3:2005
|
Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
ISO 23328-2:2002
|
Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects |
ISO 10079-2:2014
|
Medical suction equipment Part 2: Manually powered suction equipment |
EN 3-7:2004+A1:2007
|
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
EN 80601-2-30:2010/A1:2015
|
MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS (IEC 80601-2-30:2009/A1:2013) |
EN ISO 10555-5:2013
|
Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO 10555-5:2013) |
EN 13976-2:2011
|
Rescue systems - Transportation of incubators - Part 2: System requirements |
EN ISO 8537:2016
|
Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
EN ISO 5364:2016
|
Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) |
ISO 81060-2:2013
|
Non-invasive sphygmomanometers Part 2: Clinical investigation of automated measurement type |
ISO 5366-1:2000
|
Anaesthetic and respiratory equipment Tracheostomy tubes Part 1: Tubes and connectors for use in adults |
EN ISO 7396-1:2016
|
Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
EN ISO 81060-2:2014
|
Non-invasive sphygmomanometers - Part 2: Clinical investigation of automated measurement type (ISO 81060-2:2013) |
ISO 7864:2016
|
Sterile hypodermic needles for single use — Requirements and test methods |
IEC 80601-2-30:2009+AMD1:2013 CSV
|
Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
EN ISO 5356-2:2012
|
Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012) |
EN ISO 5366-1:2009
|
Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) |
IEC 60601-2-27:2011
|
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
ISO 10555-3:2013
|
Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters |
EN ISO 9360-1:2009
|
Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
EN 1865-3:2012+A1:2015 (edition 2)
|
Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher |
ISO 10555-1:2013
|
Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
EN 455-2:2015
|
Medical gloves for single use - Part 2: Requirements and testing for physical properties |
ISO 80601-2-61:2011
|
Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
EN 3-8:2006/AC:2007
|
PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
ISO 80601-2-55:2011
|
Medical electrical equipment Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
ISO 2631-1:1997
|
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
EN 143:2000/A1:2006
|
RESPIRATORY PROTECTIVE DEVICES - PARTICLE FILTERS - REQUIREMENTS, TESTING, MARKING |
EN ISO 5361:2016
|
Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) |
ISO 10079-3:2014
|
Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
EN ISO 13688:2013
|
Protective clothing - General requirements (ISO 13688:2013) |
IEC 60601-2-24:2012
|
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
ISO 407:2004
|
Small medical gas cylinders Pin-index yoke-type valve connections |
ISO 23328-1:2003
|
Breathing system filters for anaesthetic and respiratory use — Part 1: Salt test method to assess filtration performance |
ISO 7137:1995
|
Aircraft — Environmental conditions and test procedures for airborne equipment |
EN ISO 9170-2:2008
|
Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
ISO 9360-1:2000
|
Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml |
EN 1789:2007+A2:2014
|
Medical vehicles and their equipment - Road ambulances |
EN 14605:2005+A1:2009
|
Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
ISO 5361:2016
|
Anaesthetic and respiratory equipment — Tracheal tubes and connectors |
ISO 9170-1:2017
|
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
EN ISO 9170-1:2008
|
Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
EN ISO 7396-2:2007
|
Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
EN 60601-2-12:2006
|
Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
EN ISO 80601-2-56:2017
|
Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2017) |
EN ISO 10524-2:2006
|
Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) |
EN 13976-1:2011
|
Rescue systems - Transportation of incubators - Part 1: Interface conditions |
EN ISO 10524-1:2006
|
Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) |
ISO 10524-1:2006
|
Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
IEC 60601-2-12:2001
|
Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
EN 20594-1:1993/A1:1997
|
CONICAL FITTINGS WITH A 6% (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - GENERAL REQUIREMENTS |
EN ISO 10079-3:2014
|
Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014) |
96/98/EC : 1996 COR 3 2015
|
COUNCIL DIRECTIVE 96/98/EC OF 20 DECEMBER 1996 ON MARINE EQUIPMENT |
ISO 6009:2016
|
Hypodermic needles for single use Colour coding for identification |
EN 1707 : 1996
|
CONICAL FITTINGS WITH A 6 % (LUER) TAPER FOR SYRINGES, NEEDLES AND CERTAIN OTHER MEDICAL EQUIPMENT - LOCK FITTINGS |
ISO 594-1:1986
|
Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
ISO 10555-5:2013
|
Intravascular catheters — Sterile and single-use catheters — Part 5: Over-needle peripheral catheters |
EN ISO 23328-1:2008
|
Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance (ISO 23328-1:2003) |
EN 1865-5:2012
|
Patient handling equipment used in road ambulances - Part 5: Stretcher support |
EN 60601-2-4:2011
|
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
ISO 10524-2:2005
|
Pressure regulators for use with medical gases Part 2: Manifold and line pressure regulators |
ISO 7396-1:2016
|
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |