EN 13175:2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
08/30184309 DC : DRAFT SEP 2008
|
BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
BS EN 16678:2015
|
Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
12/30247799 DC : DRAFT JAN 2012
|
BS EN 12560-2 - FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
I.S. EN 14341:2006
|
INDUSTRIAL VALVES - STEEL CHECK VALVES |
UNI EN 1474-1 : 2009
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
10/30216705 DC : 0
|
BS EN 12953-2 - SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
API 676 CHINESE : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
BS EN 593:2017
|
Industrial valves. Metallic butterfly valves for general purposes |
BS EN 16767:2016
|
Industrial valves. Steel and cast iron check valves |
14/30301577 DC : 0
|
BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
I.S. EN 1515-4:2009
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
PREN 13555 : DRAFT 2011
|
FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
UNE-EN 16678:2016
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
18/30369304 DC : DRAFT APR 2018
|
BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN ISO 16136:2006
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
I.S. EN 14382:2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
I.S. EN ISO 21787:2006
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
I.S. EN ISO 16138:2006
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
I.S. EN ISO 16139:2006
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
I.S. EN ISO 16135:2006
|
INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
ONORM EN ISO 16139 : 2008
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
I.S. EN ISO 16137:2006
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
DIN EN 13709:2010-10
|
Industrial valves - Steel globe and globe stop and check valves |
DIN EN 12007-3:2015-07
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNTIONAL REQUIREMENTS FOR STEEL |
DIN EN 1591-1:2014-04
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
DIN EN 1473:2016-10
|
Installation and equipment for liquefied natural gas - Design of onshore installations |
DIN EN 14382 E : 2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
UNE-EN 1983:2014
|
Industrial valves - Steel ball valves |
BS EN ISO 16135:2006
|
Industrial valves. Ball valves of thermoplastic materials |
BS EN 14382 : 2005
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
BS EN 1984:2010
|
Industrial valves. Steel gate valves |
BS EN ISO 16139:2006
|
Industrial valves. Gate valves of thermoplastic materials |
EN 12952-2:2011
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
EN 12952-5:2011
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
EN 12952-3:2011
|
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
CEN/TR 16395:2012
|
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document |
EN 10311:2005
|
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
EN 1349:2009
|
Industrial process control valves |
EN 12953-2:2012
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
EN 12560-2:2013
|
Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
BS EN 1349:2009
|
Industrial process control valves |
PREN 13774 : DRAFT 2011
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
PD CEN/TR 13445-101:2015
|
Unfired pressure vessels. Example of application |
13/30286091 DC : 0
|
BS EN 16678 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
DIN EN 15001-1:2011-02
|
Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
PD CEN/TR 16395:2012
|
Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document |
UNE-EN 13175:2015
|
LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
PREN 14382 : DRAFT 2016
|
GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
16/30339483 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
PREN 13709 : DRAFT 2009
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
PREN 1984 : DRAFT 2009
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
11/30249105 DC : 0
|
BS EN 12516-1 - INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
I.S. EN 334:2005
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
UNI EN 1515-4 : 2010
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
UNI EN 334 : 2009
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
ONORM EN 334 : JUN 2009
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
NF EN 1515-4 : 2010
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
I.S. EN 12516-1:2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
BS EN 13175:2014
|
LPG Equipment and accessories. Specification and testing for Liquefied Petroleum Gas (LPG) pressure vessel valves and fittings |
UNI EN 13175 : 2015
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
ONORM EN ISO 16136 : 2008
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
ONORM EN ISO 16137 : 2008
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
DIN EN 1626:2009-01
|
CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
DIN EN 1984:2010-10
|
Industrial valves - Steel gate valves |
DIN EN 1594:2013-12
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
DIN EN 14422:2013-09
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
BS EN ISO 13709:2003
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
ISO 16136:2006
|
Industrial valves Butterfly valves of thermoplastics materials |
BS EN 334 : 2005
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
17/30362889 DC : 0
|
BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
BS EN 1591-1:2013
|
Flanges and their joints. Design rules for gasketed circular flange connections Calculation |
BS EN 1473:2016
|
Installation and equipment for liquefied natural gas. Design of onshore installations |
UNE-EN 593:2009
|
Industrial valves - Metallic butterfly valves |
BS EN 13709:2002
|
Industrial valves. Steel globe and globe stop and check valves |
I.S. EN 1626:2008
|
CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
I.S. EN 13774:2013
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
I.S. EN 1594:2013
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
DIN EN 1473:1997-11
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN 12560-2:2013
|
FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
I.S. EN 12953-2:2012
|
SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 1984:2010
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
DIN EN 1983:2013-12
|
INDUSTRIAL VALVES - STEEL BALL VALVES |
I.S. EN 14422:2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
I.S. EN 12952-2:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
I.S. EN 1473:2016
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
I.S. EN 1983:2013
|
INDUSTRIAL VALVES - STEEL BALL VALVES |
I.S. EN 1349:2009
|
INDUSTRIAL PROCESS CONTROL VALVES |
I.S. EN 12952-3:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
I.S. EN 12952-5:2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
I.S. EN 13709:2010
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
I.S. EN 1591-1:2013
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
I.S. EN 12007-3:2015
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 3: SPECIFIC FUNCTIONAL REQUIREMENTS FOR STEEL |
UNI EN 1349 : 2010
|
INDUSTRIAL PROCESS CONTROL VALVES |
NF EN 12952-2 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
NF EN 12952-3 : 2012
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
VDI 2200:2007-06
|
Tight flange connections - Selection, calculation, design and assembly of bolted flange connections |
I.S. EN 593:2017
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
PREN 1594 : DRAFT 2013
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
DIN EN 1474-1:2009-03
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
11/30243885 DC : 0
|
BS EN 13774 - VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
API 676 REDLINE : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
09/30205877 DC : 0
|
BS EN 1984 - INDUSTRIAL VALVES - STEEL GATE VALVES |
PREN 1473 : DRAFT 2018
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
08/30187521 DC : 0
|
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
EN 1473:2016
|
Installation and equipment for liquefied natural gas - Design of onshore installations |
09/30205883 DC : 0
|
BS EN 13709 - INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
DIN EN 16767 E : 2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
11/30248108 DC : 0
|
BS EN 13555 - FLANGES AND THEIR JOINTS - GASKET PARAMETERS AND TEST PROCEDURES RELEVANT TO THE DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS |
10/30234607 DC : 0
|
BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
17/30347443 DC : DRAFT JUN 2017
|
BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS |
NF EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
I.S. EN 1474-1:2008
|
INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
UNI EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
EN 12953-4:2018
|
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler |
I.S. EN 12953-4:2002
|
SHELL BOILERS - PART 4: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
I.S. EN 16767:2016
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
DIN EN 334:2016-05 (Draft)
|
GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
UNE-EN 12952-5:2012
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
I.S. EN 1092-1:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
ONORM EN ISO 16138 : 2008
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
DIN EN ISO 16135:2006-06
|
INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
DIN EN 14422 E : 2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
DIN EN 14382:2016-05 (Draft)
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
BS EN 1594:2013
|
Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
BS EN ISO 16138:2006
|
Industrial valves. Diaphragm valves of thermoplastics materials |
BS EN 1626:2008
|
Cryogenic vessels. Valves for cryogenic service |
ISO 16135:2006
|
Industrial valves Ball valves of thermoplastics materials |
EN 1474-1:2008
|
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms |
UNI EN 1591-1 : 2014
|
FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 1: CALCULATION |
UNI EN 12952-5 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
UNI EN 12952-2 : 2011
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 1983 : 2013
|
INDUSTRIAL VALVES - STEEL BALL VALVES |
UNI EN 13774 : 2013
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
EN ISO 21787:2006
|
Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
UNI EN 12560-2 : 2013
|
FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKETS FOR CLASS DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
UNI EN 12952-3 : 2012
|
WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS OF THE BOILER |
UNI EN 1594 : 2013
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
UNI EN 1626 : 2009
|
CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
UNI EN 15001-1 : 2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
UNI EN 14382 : 2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
UNI EN 12953-2 : 2012
|
SHELL BOILERS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
UNI EN 1984 : 2010
|
INDUSTRIAL VALVES - STEEL GATE VALVES |
UNI EN 14422 : 2013
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS (LPG) TRANSFER HOSES |
UNI EN 13709 : 2010
|
INDUSTRIAL VALVES - STEEL GLOBE AND GLOBE STOP AND CHECK VALVES |
UNI CEN/TR 16395 : 2014
|
GAS INFRASTRUCTURE - CEN/TC 234 PRESSURE DEFINITIONS GUIDELINE DOCUMENT |
DIN EN 16678 E : 2016
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUTOFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
EEMUA 159 : 2014
|
ABOVE GROUND FLAT BOTTOMED STORAGE TANKS - A GUIDE TO INSPECTION, MAINTENANCE AND REPAIR |
14/30300117 DC : 0
|
BS EN 13175 - LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
16/30336440 DC : DRAFT MAR 2016
|
BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
08/30184303 DC : DRAFT SEP 2008
|
BS EN 12952-3 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 3: DESIGN AND CALCULATION FOR PRESSURE PARTS |
BS EN 1474-1:2008
|
Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms |
16/30334287 DC : 0
|
BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR |
BS EN 1515-4:2009
|
Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
PREN 593 : DRAFT 2016
|
INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
08/30173031 DC : DRAFT JAN 2008
|
BS EN 1515-4 - FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
08/30179182 DC : DRAFT MAY 2008
|
BS EN 1349 - INDUSTRIAL PROCESS CONTROL VALVES |
DIN EN 1515-4 E : 2010
|
FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
API STD 676 : 2009
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
API 610 : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
API 610 REDLINE : 2010
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
S.R. CEN/TR 16395:2012
|
GAS INFRASTRUCTURE - CEN/TC 234 PRESSURE DEFINITIONS - GUIDELINE DOCUMENT |
I.S. EN 15001-1:2009
|
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING |
EN 1092-1:2018
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
BS EN 12516-1 : 2014
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
EN 12516-1:2014
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
UNE-EN 12516-1:2016
|
Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
16/30334290 DC : 0
|
BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR |
EN 12480:2018
|
Gas meters - Rotary displacement gas meters |
I.S. EN 12480:2018
|
GAS METERS - ROTARY DISPLACEMENT GAS METERS |
DIN EN ISO 21787 E : 2006
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
I.S. EN ISO 13709:2009
|
CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
DIN EN ISO 16138:2006-06
|
INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
DIN EN 13831:2007-12
|
Closed expansion vessels with built in diaphragm for installation in water |
DIN EN ISO 16136:2006-06
|
INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
DIN EN ISO 16137:2006-06
|
INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
DIN EN ISO 16139:2006-06
|
INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
DIN EN 13774:2013-05
|
VALVES FOR GAS DISTRIBUTION SYSTEMS WITH MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 16 BAR - PERFORMANCE REQUIREMENTS |
BS EN 1515-3:2005
|
Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated |
BS EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements |
ISO 21787:2006
|
Industrial valves Globe valves of thermoplastics materials |
BS EN 14341:2006
|
Industrial valves. Steel check valves |
EN 16767:2016
|
Industrial valves - Steel and cast iron check valves |
BS EN 14620-2:2006
|
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0°C and -165°C Metallic components |
UNE-EN 15001-1:2010
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
BS EN ISO 16137:2006
|
Industrial valves. Check valves of thermoplastic materials |
BS EN ISO 21787:2006
|
Industrial valves. Globe valves of thermoplastics materials |
BS EN 10311:2005
|
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
BS EN 12952-5:2011
|
Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
UNE-EN 12952-2:2012
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
UNE-EN 12953-2:2013
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
UNE-EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
UNE-EN 1515-4:2010
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
ISO 16137:2006
|
Industrial valves Check valves of thermoplastics materials |
BS EN ISO 16136:2006
|
Industrial valves. Butterfly valves of thermoplastic materials |
BS EN 12560-2:2013
|
Flanges and their joints. Dimensions of gaskets for Class-designated flanges Spiral wound gaskets for use with steel flanges |
UNE-EN 1591-1:2014
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
ISO 16139:2006
|
Industrial valves Gate valves of thermoplastics materials |
UNE-EN 1594:2014
|
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
BS EN 14422:2013
|
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
BS EN 12007-3:2000
|
Gas supply systems. Pipelines for maximum operating pressure up to and including 16 bar Specific functional recommendations for steel |
BS EN 13831:2007
|
Closed expansion vessels with built-in diaphragm for installation in water |
UNE-EN 14422:2014
|
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
BS EN 1983:2013
|
Industrial valves. Steel ball valves |
UNE-EN 12952-3:2012
|
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
BS EN 12953-2:2012
|
Shell boilers Materials for pressure parts of boilers and accessories |
UNE-EN 12007-3:2015
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
DIN EN ISO 21787:2006-06
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
EN 1515-4:2009
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
EN ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
EN ISO 16139:2006
|
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
EN 14422:2013
|
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses |
EN 13774:2013
|
Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
EN ISO 16135:2006
|
Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
EN 16678:2015
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
EN 1626:2008
|
Cryogenic vessels - Valves for cryogenic service |
EN 15001-1:2009
|
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
EN 13709:2010
|
Industrial valves - Steel globe and globe stop and check valves |
EN ISO 16136:2006
|
Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
EI 1540 : 2014
|
DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
EN 1983:2013
|
Industrial valves - Steel ball valves |
EN 14382:2005+A1:2009/AC:2009
|
SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
EN 1594:2013
|
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
EN 1984:2010
|
Industrial valves - Steel gate valves |
EN 14620-2:2006
|
Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and -165 °C - Part 2: Metallic components |
EN 1515-3:2005
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
EN 334:2005+A1:2009
|
Gas pressure regulators for inlet pressures up to 100 bar |
EN 1591-1:2013
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation |
EN ISO 16138:2006
|
Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
EN 13831:2007
|
Closed expansion vessels with built in diaphragm for installation in water |
EN 593:2017
|
Industrial valves - Metallic butterfly valves for general purposes |
EN ISO 16137:2006
|
Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
EN 14341:2006
|
Industrial valves - Steel check valves |
API 676 : 2009 : R2015
|
POSITIVE DISPLACEMENT PUMPS - ROTARY |
DIN 2695:2002-11
|
Diaphragm-weld packings and weld ring seals for flange connections |
08/30184300 DC : DRAFT SEP 2008
|
BS EN 12952-2 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES |
PREN 14422 : DRAFT 2010
|
CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES |
13/30271116 DC : 0
|
BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
07/30158957 DC : 0
|
BS EN 1626 - CRYOGENIC VESSELS - VALVES FOR CRYOGENIC SERVICE |
BS EN 15001-1:2009
|
Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing |
DIN EN 16767:2016-08
|
INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES |
DIN EN 1515-4:2010-04
|
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
14/30297213 DC : 0
|
BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
DIN EN 16678:2016-02
|
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa |
I.S. EN 13175:2014
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
S.R. CEN/TR 13445-101:2015
|
UNFIRED PRESSURE VESSELS - PART 101: EXAMPLE OF APPLICATION |
17/30360051 DC : 0
|
BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
I.S. EN 16678:2015
|
SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - AUTOMATIC SHUT-OFF VALVES FOR OPERATING PRESSURE OF ABOVE 500 KPA UP TO AND INCLUDING 6300 KPA |
DIN EN 13175:2015-02
|
LPG EQUIPMENT AND ACCESSORIES - SPECIFICATION AND TESTING FOR LIQUEFIED PETROLEUM GAS (LPG) PRESSURE VESSEL VALVES AND FITTINGS |
DIN EN 12516-1:2015-01
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS |
CEN/TR 13445-101:2015
|
Unfired pressure vessels - Example of application |
PREN 13611 : DRAFT 2017
|
SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN 12952-3:2012-03
|
Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler |
ONORM EN ISO 21787 : 2008
|
INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
DIN EN 1515-3 E : 2005
|
FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED |
DIN EN 12953-2:2012-05
|
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 12560-2:2013-12
|
Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
DIN EN 12952-2:2011-10
|
Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories |
DIN EN 12952-5:2012-01
|
Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
ISO 16138:2006
|
Industrial valves Diaphragm valves of thermoplastics materials |
BS EN 12952-2:2011
|
Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories |
BS EN 12952-3:2011
|
Water-tube boilers and auxiliary installations Design and calculation for pressure parts of the boiler |
ISO 13709:2009
|
Centrifugal pumps for petroleum, petrochemical and natural gas industries |
EN 12007-3:2015
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
DIN EN 10311:2005-08
|
Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
DIN EN 1515-3:2005-12
|
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated |