Skip to content
Please enter a keyword to search

  • EN 294:1992/AC:1993

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS

    Available format(s): 

    Superseded date:  01-03-2008

    Language(s): 

    Published date:  12-01-2013

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    0 Introduction
    1 Scope
    2 Normative references
    3 Definitions
      3.1 Protective structure
      3.2 Safety distance
    4 Values for safety distances
      4.1 General
      4.2 Reaching upwards
      4.3 Reaching over protective structures
      4.4 Reaching round
      4.5 Reaching through openings
    5 Effect of additional protective structures on safety distances

    Abstract - (Show below) - (Hide below)

    Establishes values for safety distances to prevent danger zones being reached by the upper limbs of persons with a minimum age of three years. Need not be applied to machinery which is covered by certain electrical standard in which specific testing procedures are set out.

    General Product Information - (Show below) - (Hide below)

    Committee TC 114
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    I.S. EN 1088:1996 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    I.S. EN 1454:1998 PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
    DIN EN 14753 E : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
    DIN EN 15164 E : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
    BS EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles
    DIN EN 15162:2008-10 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
    I.S. EN ISO 12100-2:2003 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
    14/30303750 DC : 0 BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
    I.S. EN 12415:2000 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
    02/711111 DC : DRAFT SEP 2002 PREN 415-7 - PACKAGING MACHINES SAFETY - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    03/119040 DC : DRAFT NOV 2003 PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
    04/102158 DC : 0 BS EN 81-43 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: SPECIAL PURPOSE LIFTS FOR CRANES
    06/30118768 DC : 0 EN 1398 - DOCK LEVELLERS
    07/30172833 DC : DRAFT DEC 2007 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    11/30244210 DC : 0 BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
    00/707535 DC : DRAFT APR 2000 PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    08/30177207 DC : DRAFT MAY 2008 BS EN 13019 AMD1 - MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
    07/30142135 DC : 0 BS EN 1012-1 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 1: AIR COMPRESSORS
    I.S. EN 13128:2001 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
    I.S. EN 14070:2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    03/313810 DC : 0 EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
    DIN EN 14958 E : 2010 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
    03/308804 DC : 0 ISO 4254-6 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - TECHNICAL MEANS FOR ENSURING SAFETY - PART 6: SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS
    97/720419 DC : DRAFT DEC 1997 PREN 1009-3 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 3: CRUSHING AND MILLING MACHINERY
    BS EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment inside the factory
    00/706811 DC : DRAFT MAR 2000 BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    05/30130669 DC : DRAFT MAR 2005 BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    03/114108 DC : DRAFT AUG 2003 EN 14655 - FOOD PROCESSING MACHINERY - BAGUETTE SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 14958:2010-10 Food processing machinery - Machinery for grinding and processing flour and semolina - Safety and hygiene requirements (includes Amendment A1:2009)
    97/707829 DC : DRAFT MAY 1997 PREN 12851 - FOOD PROCESSING MACHINERY - CATERING ATTACHMENTS FOR MACHINES HAVING AN AUXILIARY DRIVE HUB - SAFETY AND HYGIENE REQUIREMENTS
    05/30076926 DC : DRAFT APR 2005 EN 12604 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS
    BS EN 15162:2008 Machines and plants for mining and tooling of natural stone. Safety requirements for gang saws
    97/713936 DC : DRAFT AUG 1997 PREN 13000 - CRANES - SAFETY - MOBILE CRANES
    08/30181446 DC : DRAFT JULY 2008 BS EN 1069-1 - WATER SLIDES - PART 1: SAFETY REQUIREMENTS AND TEST METHODS
    BS EN 14753:2007 Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
    07/30163456 DC : 0 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    05/30129947 DC : 0 EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS
    05/19981949 DC : DRAFT MAY 2005 BS EN 1034-14 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLICERS
    08/30177210 DC : DRAFT MAY 2008 BS EN 13021 AMD1 - WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
    99/711929 DC : DRAFT JUL 1999 EN 13621 - FOOD PROCESSING MACHINERY - SALAD DRYERS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12012-4 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    04/30111616 DC : 0 EN 81-40 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
    08/30173506 DC : DRAFT JAN 2008 BS EN 1539 - DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
    04/30126149 DC : 0 EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY
    CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    DIN EN 14886 E : 2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
    EN 703:2004+A1:2009 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety
    CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    I.S. EN 15164:2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
    I.S. EN 13000:2010 Cranes - Mobile cranes
    I.S. EN 16282-2:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
    I.S. EN 1501-3:2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
    PREN 378-1 : DRAFT 2013 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    EN 81-80:2003 Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts
    I.S. EN 1114-3:2001 RUBBER AND PLASTICS MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    DIN EN 1673:2010-10 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements (includes Amendment A1:2009)
    EN 676:2003+A2:2008/AC:2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    DIN EN 14910 E : 2009 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
    DIN EN 14985 E : 2012 CRANES - SLEWING JIB CRANES
    DIN EN 415-7:2009-12 Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
    DIN EN 13288:2010-10 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 415-5:2010-04 Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
    DIN EN 13525:2010-05 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    DIN EN 13118:2010-01 Agricultural machinery - Potato harvesting equipment - Safety (includes Amendment A1:2009)
    DIN EN 14238 E : 2010 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    DIN EN 1010-3:2010-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines (includes Amendment A1:2009)
    DIN EN 1889-2 E : 2009 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    DIN EN 1495:2009-12 Lifting platforms - Mast climbing work platforms (includes Amendment A2:2009)
    DIN EN 1034-14:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter (includes Amendment A1:2009)
    DIN EN 12653:2010-06 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009)
    DIN EN 13019:2009-04 Machines for road surface cleaning - Safety requirements (includes Amendment A1:2008)
    DIN EN 1756-2:2009-12 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers (includes Amendment A1:2009)
    DIN EN 12012-3:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    DIN EN 12198-2:2008-11 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
    DIN EN 13389:2010-10 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements (includes Amendment A1:2009)
    BS EN 12203 : 2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
    BS EN 14466 : 2005 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
    BS EN 14018 : 2005 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
    BS EN 786 : 1996 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
    BS EN 13035-3 : 2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    BS EN 13042-3 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    BS EN 1974 : 1998 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 13128 : 2001 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
    BS EN 13448 : 2002 AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
    BS EN 618 : 2002
    BS EN 12604:2000 Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements
    BS EN 704 : 1999 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
    BS EN 13000 : 2010 CRANES - MOBILE CRANES
    BS EN 1035:1999 Tannery machines. Moving platen machinery. Safety requirements
    BS EN 12198-2 : 2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
    BS EN 14861 : 2004 FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
    DIN EN 13042-1:2010-04 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
    BS EN 12198-3 : 2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
    BS EN 13118 : 2000 AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
    BS EN 15067:2007 Plastics and rubber machines. Film converting machines for bags and sacks. Safety requirements
    BS EN 12387 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 1673 : 2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1673:2000 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12198-2:2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
    EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements
    I.S. EN 14010:2004
    I.S. EN 957-2:2003 STATIONARY TRAINING EQUIPMENT - PART 2: STRENGTH TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS
    I.S. EN 14910:2007 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
    I.S. EN 12921-1:2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
    UNI EN 15746-2 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
    UNI EN 703 : 2010 AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
    DIN EN 15067:2008-03 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
    EN 12012-4:2006+A1:2008 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
    EN 13102:2005+A1:2008 Ceramic machines - Safety - Loading and unloading of fine clay tiles
    EN 1088:1995+A2:2008 Safety of machinery - Interlocking devices associated with guards - Principles for design and selection
    EN 12198-3:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening
    EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
    DIN EN 14070:2009-07 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    CEN/TR 15563:2007 Temporary works equipment - Recommendations for achieving health and safety
    EN 1035:1998/AC:2002 TANNERY MACHINES - MOVING PLATEN MACHINERY - SAFETY REQUIREMENTS
    EN 1034-5:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
    EN 12044:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
    EN 12653:1999+A2:2009 Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements
    EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
    EN 13112:2002+A1:2009 Tannery machines - Splitting and bandknife shearing machines - Safety requirements
    EN 1070 : 1998 SAFETY OF MACHINERY - TERMINOLOGY
    DIN EN 81-2:2000-05 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
    DIN EN 1114-3:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    EN 12151:2007 Machinery and plants for the preparation of concrete and mortar - Safety requirements
    EN 1034-6:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
    EN 12336:2005+A1:2008 Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lining erection equipment - Safety requirements
    DIN EN 1114-2:2010-01 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    DIN EN 791:2010-01 DRILL RIGS - SAFETY
    EN 12717:2001+A1:2009 Safety of machine tools - Drilling machines
    EN 12621:2006+A1:2010 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    EN 13114:2002+A1:2009 Tannery machines - Rotating process vessels - Safety requirements
    EN 13021:2003+A1:2008 Winter service machines - Safety requirements
    EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety
    EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
    EN 1010-4:2004+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
    EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
    EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
    EN 1114-2:1998+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
    EN 12478:2000/AC:2001 SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
    UNI EN 415-3 : 2010 SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
    EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    EN 13118:2000+A1:2009 Agricultural machinery - Potato harvesting equipment - Safety
    EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
    EN 12198-2:2002+A1:2008 Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation emission measurement procedure
    EN 12505:2000+A1:2009 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements
    EN 1034-13:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
    EN 1034-7:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
    EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
    EN 12012-3:2001+A1:2008 Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
    EN 12417:2001+A2:2009/AC:2010 MACHINE TOOLS - SAFETY - MACHINING CENTRES
    EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines
    EN 1034-2:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
    EN 13448:2001+A1:2009 Agricultural and forestry machinery - Inter-row mowing units - Safety
    EN 12012-2:2001+A2:2008 Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
    EN 1010-3:2002+A1:2009 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
    DIN EN 999:1998-12 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    I.S. EN 13200-4:2006 SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS
    DIN EN 1501-3:2010-06 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
    92/70321 DC : DRAFT FEB 1992 SPECIFICATION FOR CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS ONLY - SPECIAL SAFETY REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
    03/109865 DC : DRAFT JULY 2003 BS EN 415-6 - PACKAGING MACHINES SAFETY - PART 6: PALLET WRAPPING MACHINES
    09/30178293 DC : 0 BS EN 859:2007/A1 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES
    03/116757 DC : DRAFT OCT 2003 EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC PASSENGER AND GOODS PASSENGER LIFTS WITH INCLINED TRAVEL PATH
    03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
    UNE-EN 13684:2005 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
    08/30178810 DC : DRAFT MAY 2008 BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES
    I.S. EN 1870-2:1999 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
    BS EN 45510-6-8:2000 Guide for the procurement of power station equipment. Turbine auxiliaries Cranes - Section 8: Cranes
    03/306578 DC : DRAFT APR 2003 EN 14658 - CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
    04/30106849 DC : DRAFT MAY 2004 EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS
    08/30173038 DC : DRAFT JAN 2008 BS EN 422 - PLASTICS AND RUBBER MACHINES - BLOW MOULDING MACHINES - SAFETY REQUIREMENTS
    EN 474-1:2006+A5:2018 Earth-moving machinery - Safety - Part 1: General requirements
    03/306593 DC : DRAFT APR 2003 BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
    04/30114100 DC : DRAFT MAY 2004 PREN 14958 - GRAIN PROCESSING EQUIPMENT - GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12151:2007 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    DIN EN 15164:2008-09 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
    11/30244195 DC : 0 BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
    04/102838 DC : DRAFT JAN 2004 EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
    01/715188 DC : DRAFT NOV 2001 PREN 774 - GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
    03/118895 DC : 0 EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES
    PREN 12453 : DRAFT 2014 INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS
    09/30202532 DC : 0 BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    03/314351 DC : 0 EN 378-2 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 2: DESIGN, CONSTRUCTION, TESTING, MARKING AND DOCUMENTATION
    04/30124285 DC : 0 EN 15059 - SNOW GROOMING EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
    05/30131998 DC : 0 BS EN 15180 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    04/301783 DC : DRAFT JAN 2004 EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES
    05/19981971 DC : 0 BS EN 1034-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
    PREN 15746-2 : DRAFT 2015 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 14017:2005 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
    00/715016 DC : DRAFT OCT 2000 PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
    05/19981975 DC : DRAFT JUN 2005 BS EN 1034-2 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
    ISO 20957-2:2005 Stationary training equipment Part 2: Strength training equipment, additional specific safety requirements and test methods
    UNI EN 81-80 : 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
    DIN EN 13035-1 E : 2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
    PREN 14986 : DRAFT 2014 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    I.S. EN 15746-2:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    DD ENV 1070:1993 Safety of machinery. Terminology
    I.S. EN 13035-1:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 1: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT INSIDE THE FACTORY
    I.S. EN 61029-1:2009 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    UNE-EN 16282-4:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements
    UNI EN 12012-1 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    NF EN 1501-2 : 2005 + A1 2010 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
    NF EN 1673 : 2000 + A1 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    I.S. EN 12965:2003 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
    S.R. CWA 15902-1:2009 LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS)
    DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
    DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    DIN EN 12387:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements (includes Amendment A1:2009)
    DIN EN 13200-4:2006-12 Spectator facilities - Part 4: Seats - Product characteristics
    DIN EN 12965:2009-12 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
    DIN EN 13000:2014-11 CRANES - MOBILE CRANES
    DIN EN 1034-22:2010-06 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood grinders (includes Amendment A1:2009)
    DIN EN 13114:2010-03 Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
    DIN EN 13128:2009-09 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
    DIN EN 13021:2009-04 Winter service machines - Safety requirements (includes Amendment A1:2008)
    DIN EN 1010-4:2010-12 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines (includes Amendment A1:2009)
    DIN EN 12621:2011-07 Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010)
    DIN EN 12957:2009-07 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    DIN EN 13112:2011-03 Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
    DIN EN 12203:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009
    DIN EN 12301:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    DIN EN 1756-1:2008-10 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods (includes Amendment A1:2008)
    DIN EN 12417:2009-07 MACHINE TOOLS - SAFETY - MACHINING CENTRES
    DIN EN 12581:2011-02 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010)
    DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
    DIN EN 14957 E : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 13102:2009-05 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
    DIN EN 1974:2016-06 (Draft) Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016
    DIN EN 1012-2:2011-12 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
    DIN EN 620:2011-07 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials (includes Amendment A1:2010)
    DIN EN 14010:2009-12 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009)
    DIN EN 909:2009-12 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety (includes Amendment A1:2009)
    DIN EN 14466:2008-09 FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
    DIN EN 693:2011-11 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
    DIN EN 14910:2009-08 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
    DIN EN 12044:2010-03 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009)
    DIN EN 13042-1 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    DIN EN 14238:2010-02 Cranes - Manually controlled load manipulating devices (includes Amendment A1:2009)
    DIN EN 13035-3:2010-02 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    DIN EN 13042-3:2010-05 Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
    BS EN 774:1996 Garden equipment. Hand held, integrally powered hedge trimmers. Safety
    BS EN 1501-2 : 2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
    BS EN 1870-2:1999 Safety of woodworking machines. Circular sawing machines Horizontal beam panel saws and vertical panel saws
    BS EN 14238 : 2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
    BS EN 13355 : 2004 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    BS EN 12653 : 2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
    BS EN 1034-14 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
    BS EN 12757-1 : 2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    BS EN 13218 : 2002 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    BS EN 620 : 2002
    BS EN 81-80:2003 Safety rules for the construction and installation of lifts. Existing lifts Rules for the improvement of safety of existing passenger and goods passenger lifts
    I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    I.S. EN 619:2002
    DIN EN 1915-1:2001-06 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
    I.S. EN 1034-2:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
    I.S. EN 12717:2001 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
    I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
    I.S. EN 13114:2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
    I.S. EN 12312-20:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
    I.S. EN 12203:2003 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
    EN 15746-2:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
    I.S. EN 13448:2002 AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
    DIN EN 12012-2:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    I.S. EN 1010-4:2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
    I.S. EN 1070:1999 SAFETY OF MACHINERY - TERMINOLOGY
    I.S. EN 13288:2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1034-13:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
    I.S. EN 12198-3:2002 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
    I.S. EN 12757-1:2005 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    UNI EN 1673 : 2010 FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 709:1997 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
    I.S. EN 13118:2001 AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
    I.S. EN 13140:2001 AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
    DIN EN 1570:2009-12 SAFETY REQUIREMENTS FOR LIFTING TABLES
    I.S. EN 1028-1:2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
    I.S. EN 14238:2004 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    I.S. EN 786:1996 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
    I.S. EN 1034-22:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
    I.S. EN 13042-1:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    I.S. EN 415-3:2000 SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
    I.S. EN 13035-3:2003 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    DIN EN 13218:2010-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    EN 1673:2000+A1:2009 Food processing machinery - Rotary rack ovens - Safety and hygiene requirements
    I.S. EN 1034-4:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
    I.S. EN 14957:2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 1034-6:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
    I.S. EN 14658:2005 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
    I.S. EN 12044:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 13102:2006 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
    DIN EN 1974:2010-05 Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009)
    UNI EN 1974 : 2009 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 909:1999 AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
    I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
    I.S. EN 12505:2000 FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 12621:2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    DIN EN 13218:2002-09 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    I.S. EN 1010-3:2002 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
    I.S. EN 706:1997 AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
    DIN EN 1034-7:2010-06 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests (includes Amendment A1:2009)
    I.S. EN 1612-2:2000 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
    I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
    I.S. EN 1034-5:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
    I.S. EN 13355:2005 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    I.S. EN 930:1998 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 13985:2003 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
    I.S. EN 617:2001
    I.S. EN 703:2004 AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
    I.S. EN 1034-7:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
    I.S. EN 931:1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 1034-14:2006 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
    I.S. EN 14466:2005 FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
    I.S. EN 12012-3:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    I.S. EN 908:1999 AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
    I.S. EN 13042-3:2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    I.S. EN 12653:2000 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 13389:2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 14018:2005 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
    I.S. EN 13019:2001 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
    DIN EN 1088:1996-02 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    I.S. EN 12012-2:2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
    I.S. EN 415-5:2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    DIN EN 1034-5:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters (includes Amendment A1:2009)
    I.S. EN 1114-2:1998 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    DIN EN 13788:2002-04 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
    I.S. EN 1889-2:2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    I.S. EN 13112:2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
    DIN EN 1034-4:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (includes Amendment A1:2009)
    I.S. EN 1756-1:2002 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
    I.S. EN 81-1:1999 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
    DIN EN 12012-2:2004-03 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    I.S. EN 12387:2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
    DIN EN 1034-6:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009)
    DIN EN 12957:2001-12 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    DIN EN 1845:2008-06 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
    I.S. EN 13021:2003 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
    I.S. EN 618:2002
    I.S. EN 1845:2007 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
    I.S. EN 620:2002
    EN 415-3:1999+A1:2009 Safety of packaging machines - Part 3: Form, fill and seal machines
    I.S. EN 1495:1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    I.S. EN 1012-2:1996 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
    I.S. EN 1501-2:2005 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
    I.S. EN 13390:2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 1570:1998-08 SAFETY REQUIREMENTS FOR LIFTING TABLES
    I.S. EN 1756-2:2004 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
    I.S. EN 81-2:1999 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
    I.S. EN 415-7:2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    I.S. EN 12581:2006 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    DIN EN 1034-2:2010-09 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums (includes Amendment A1:2009)
    DIN EN 12336:2010-03 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
    I.S. EN 1974:1998 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 14985:2012 CRANES - SLEWING JIB CRANES
    UNI EN 12387 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - MODULAR SHOE REPAIR EQUIPMENT - SAFETY REQUIREMENTS
    UNI EN 13390 : 2010 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 14658 : 2010 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
    VDI 4421:2000-10 Driving systems for piece goods conveying - Survey and selection
    NF EN 619 : 2003 + A1 2010
    DIN EN 707:2015-11 (Draft) AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
    DIN EN 12012-1:2015-05 (Draft) PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    UNI EN 415-8 : 2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    07/30161753 DC : 0 BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
    03/314350 DC : 0 EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
    11/30215034 DC : DRAFT MAR 2011 BS EN 12159 - BUILDERS HOISTS FOR PERSONS AND MATERIALS WITH VERTICALLY GUIDED CAGES
    UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    I.S. EN 13788:2002 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
    14/30303762 DC : 0 BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
    DIN EN 12733:2016-08 (Draft) AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
    I.S. EN 12840:2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
    I.S. EN 115:1995 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF ESCALATORS AND PASSENGER CONVEYORS
    BS EN 16282-4:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements
    08/30175637 DC : DRAFT MAR 2008 BS EN 15774 - FOOD PROCESSING MACHINERY - MACHINES FOR PROCESSING FRESH AND FILLED PASTA (TAGLIATELLE, CANNELLONI, RAVIOLI, TORTELLINI, ORECCHIETTE AND GNOCCHI) - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
    BS EN 15164:2008 Machines and plants for mining and tooling of natural stone. Safety. Requirements for chain- and belt-slotting machines
    04/30058509 DC : DRAFT JUNE 2004 BS EN 14985 - CRANES - SLEWING JIB CRANES
    12/30257298 DC : 0 BS EN 676 - FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    BS EN 13035-2:2008 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements Storage, handling and transportation equipment outside the factory
    BS EN 415-8:2008 Safety of packaging machines Strapping machines
    05/30129943 DC : 0 EN 15162 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
    05/30133339 DC : DRAFT MAY 2005 EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES
    05/30130673 DC : DRAFT MAR 2005 BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS
    UNE-EN 16282-2:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
    96/104565 DC : JUN 96 EN 12437-3 SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 3: STAIRWAYS, STEPLADDERS AND GUARDRAILS
    04/30110326 DC : DRAFT APR 2004 EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS)
    04/30110543 DC : 0 EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
    08/30156074 DC : DRAFT APR 2008 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
    05/19981967 DC : 0 BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS
    UNI EN 14753 : 2008 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
    14/30294092 DC : 0 BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    PD CEN/TR 15563:2017 Temporary works equipment. Recommendations for achieving health and safety
    97/720418 DC : DRAFT DEC 1997 EN 1009-2 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 2: FEEDING MACHINERY
    NF EN 61029-1 : 2009 AMD 11 2011 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    03/111188 DC : DRAFT AUG 2003 BS EN 1010-4 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
    96/104566 DC : DRAFT JUN 1996 PREN 12437-4 - SAFETY OF MACHINERY - PERFORMANCE MEANS OF ACCESS TO MACHINES AND INDUSTRIAL PLANT - PART 4: FIXED LADDERS
    05/30133297 DC : DRAFT MAY 2005 EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES
    05/30138432 DC : DRAFT AUG 2005 BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES
    04/301784 DC : DRAFT JAN 2004 EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES
    I.S. CEN TR 15563:2007 TEMPORARY WORKS EQUIPMENT - RECOMMENDATIONS FOR ACHIEVING HEALTH AND SAFETY
    UNI EN 1010-4 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
    DIN EN 14753:2008-03 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
    NF EN 15746-2 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    DIN EN 474-1:2014-03 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN 14958:2006 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 14958 : 2006 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 474-1:2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNI EN 707 : 2010 AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
    NF EN 13684 : 2004 + A3 2010
    DIN EN 13684:2015-05 (Draft) GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
    I.S. EN 707:1999 AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
    EN 13684:2004+A3:2009 Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety
    UNE-EN 16282-3:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements
    CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
    BS EN 707 : 1999 AGRICULTURAL MACHINERY - SLURRY TANKERS - SAFETY
    DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
    UNI EN 12733 : 2009 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
    I.S. EN 15162:2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
    DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
    I.S. EN 14886:2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
    BS EN 13684 : 2004 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
    DIN EN 1088:2008-10 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    DIN EN 13140:2010-09 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety (includes Amendment A1:2009)
    UNI EN 1501-2 : 2010 REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
    DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
    DIN EN 12312-20:2009-08 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
    DIN EN 547-1:2009-01 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
    DIN EN 12505:2010-11 Food processing machinery - Centrifugal machines for processing edible oils and fats - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 547-2:2009-01 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
    DIN EN 12717:2009-07 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
    DIN EN 1034-13:2010-07 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units (includes Amendment A1:2009)
    DIN EN 13035-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    DIN EN 786:2012-01 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
    DIN EN 13736:2009-11 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
    DIN EN 692:2009-10 Machine tools - Mechanical presses - Safety (includes Amendment A1:2009)
    DIN EN 703:2009-12 Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines - Safety (includes Amendment A1:2009)
    DIN EN 349:2008-09 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
    DIN EN 745:2010-01 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
    DIN EN 14017:2009-07 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
    DIN EN 930:2010-07 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements (includes Amendment A2:2009)
    DIN EN 676:2012-03 (Draft) AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    DIN EN 14018:2010-02 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
    DIN EN 15067 E : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
    DIN EN 13985:2009-11 Machine tools - Safety - Guillotine shears (includes Amendment A1:2009)
    DIN EN 931:2010-07 Footwear manufacturing machines - Lasting machines - Safety requirements (includes Amendment A2:2009)
    DIN EN 14466 E : 2008 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
    DIN EN 14658:2010-06 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining (includes Amendment A1:2010)
    DIN EN 13042-3 E : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    BS EN 999 : 1999 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    BS EN 115:1995 Safety rules for the construction and installation of escalators and passenger conveyors.
    BS EN 909 : 1999 AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
    BS EN 12478:2001 Safety of machine tools. Large numerically controlled turning machines and turning centres
    BS EN 1114-2 : 1998 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    BS EN 13898 : 2003 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    BS EN 709 : 1997 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
    BS EN 292-2:1991 Safety of machinery. Basic concepts, general principles for design Technical principles and specifications
    BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
    BS EN 706 : 1997 AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
    BS EN 1034-5 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
    BS EN 1495 : 1998 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    BS EN 13102 : 2005 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
    BS EN 1012-2 : 1997 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
    DIN EN 14957:2010-11 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements (includes Amendment A1:2010)
    BS EN 414:2000 Safety of machinery. Rules for the drafting and presentation of safety standards
    BS EN 12505 : 2000 FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12151:2007 Machinery and plants for the preparation of concrete and mortar. Safety requirements
    BS EN 1570 : 1999 SAFETY REQUIREMENTS FOR LIFTING TABLES
    DIN EN 676:2008-11 Automatic forced draught burners for gaseous fuels (includes Amendment A2:2008)
    UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
    UNE-EN 81-2:2001 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS.
    I.S. EN 547-1:1997 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
    ONORM EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    I.S. EN 547-2:1997 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
    UNE-EN 14861:2005 Forest machinery - Self propelled machinery - Safety requirements
    ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    UNI EN 13525 : 2010 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    EN 707:1999+A1:2009 Agricultural machinery - Slurry tankers - Safety
    UNE-EN 693:2001 Machine tools - Safety - Hydraulic presses
    UNE-EN 709:1997 AGRICULTURAL AND FORESTRY MACHINERY. PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S). SAFETY.
    I.S. EN 349:1993 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
    EN 13985:2003+A1:2009 Machine tools - Safety - Guillotine shears
    EN 618:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
    EN 909:1998+A1:2009 Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety
    EN 1570:1998+A2:2009 Safety requirements for lifting tables
    UNI EN 12921-1 : 2010 MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
    UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
    UNI EN 13288 : 2010 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1612-2 : 2008 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
    UNI EN 12581 : 2010 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
    UNI EN 1495 : 2009 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 13042-1 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    UNI EN 709 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
    UNI EN 619 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF UNIT LOADS
    UNI EN 12203 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS
    UNI EN 14957 : 2010 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 14910 : 2010 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
    UNI EN 1114-3 : 2009 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    UNI EN 786 : 2010 GARDEN EQUIPMENT - ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS - MECHANICAL SAFETY
    UNI EN 13118 : 2010 AGRICULTURAL MACHINERY - POTATO HARVESTING EQUIPMENT - SAFETY
    UNI EN 547-1 : 2009 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
    UNI EN 12198-2 : 2009 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
    UNI EN 791 : 2009 DRILL RIGS - SAFETY
    EN 708:1996/A1:2000 AGRICULTURAL MACHINERY - SOIL WORKING MACHINES WITH POWERED TOOLS - SAFETY
    EN 12312-20:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground power units
    UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
    UNI EN 547-2 : 2009 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
    UNI EN 13736 : 2009 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
    UNI EN 1114-2 : 2008 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    UNI EN 14017 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
    UNI EN 692 : 2009 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
    EN 617:2001+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
    UNI EN 745 : 2010 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
    UNI EN 1570 : 2009 SAFETY REQUIREMENTS FOR LIFTING TABLES
    UNI EN ISO 12100-2 : 2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    UNI EN 13389 : 2010 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 15067 : 2008 PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
    UNI EN 1845 : 2008 FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS
    UNI EN 617 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
    UNI EN 13035-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 3: CUTTING MACHINES
    UNI EN 1028-1 : 2008 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
    UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
    UNI EN 12653 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS
    UNI EN 12417 : 2009 MACHINE TOOLS - SAFETY - MACHINING CENTRES
    UNI EN 1034-4 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
    UNI EN 13042-3 : 2010 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 3: IS MACHINES
    UNI EN 14466 : 2008 FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
    UNI EN 81-2 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
    UNI EN 12012-3 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    UNI EN 12757-1 : 2010 MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING
    UNI EN 14861 : 2010 FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
    UNI EN 13112 : 2010 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
    UNI EN 618 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR EQUIPMENT FOR MECHANICAL HANDLING OF BULK MATERIALS EXCEPT FIXED BELT CONVEYORS
    UNI EN 908 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
    UNI EN 1034-7 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
    UNI EN 1756-2 : 2009 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
    UNI EN 1034-6 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
    UNI EN 415-5 : 2010 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    UNI EN 81-1 : 2010 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
    UNI EN 1088 : 2008 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    UNI EN 13898 : 2009 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    UNI EN 13140 : 2010 AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
    EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
    UNI EN 13218 : 2008 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    UNI EN 14238 : 2009 CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    UNI EN 13000 : 2014 CRANES - MOBILE CRANES
    UNI EN 931 : 2010 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
    UNI EN 930 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
    UNI EN 12336 : 2009 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
    EN 1495:1997+A2:2009/AC:2010 LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
    UNI EN 704 : 2010 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
    UNI EN 1010-3 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
    UNI EN 1889-2 : 2009 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    UNI EN 12044 : 2010 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
    UNI EN 999 : 2008 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
    UNI EN 1034-2 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
    UNI EN 12717 : 2009 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
    UNI EN 14070 : 2009 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    UNI EN 693 : 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
    UNI EN 13985 : 2009 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
    UNI EN 12957 : 2009 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    UNI EN 12012-2 : 2008 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    UNI EN 14010 : 2009 SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
    UNI EN 1034-5 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
    UNI EN 13128 : 2009 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
    UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
    UNI EN 14886 : 2008 PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS
    UNI EN 13355 : 2009 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
    UNI EN 1034-14 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 14: REEL SPLITTER
    UNI EN 12621 : 2010 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    UNI EN 13102 : 2009 CERAMIC MACHINES - SAFETY - LOADING AND UNLOADING OF FINE CLAY TILES
    UNI EN 415-7 : 2008 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    UNI EN 13448 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - INTER-ROW MOWING UNITS - SAFETY
    UNI EN 909 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY
    UNI EN 12505 : 2010 FOOD PROCESSING MACHINERY - CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 12198-3 : 2008 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
    UNI EN 349 : 2008 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
    UNI EN 1034-13 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
    UNI EN 14958 : 2009 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 676 : 2008 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    UNI EN 1034-22 : 2010 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
    UNI EN 1012-2 : 2009 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 2: VACUUM PUMPS
    UNI EN 14018 : 2010 AGRICULTURAL AND FORESTRY MACHINERY - SEED DRILLS - SAFETY
    UNI EN 706 : 2010 AGRICULTURAL MACHINERY - VINE SHOOT TIPPING MACHINES - SAFETY
    UNI EN 13114 : 2010 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
    UNI EN 15164 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN- AND BELT-SLOTTING MACHINES
    UNI EN 13684 : 2010 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
    PREN 16282-7 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
    04/30124330 DC : 0 EN 15067-1 - PLASTICS AND RUBBER MACHINES - WELDING MACHINES FOR PLASTICS - PART 1: SAFETY REQUIREMENTS FOR FILM CONVERTING MACHINES FOR BAGS AND SACKS
    00/715165 DC : DRAFT OCT 2000 BS EN 13954 - FOOD PROCESSING MACHINERY - BREAD SLICERS - SAFETY AND HYGIENE REQUIREMENTS
    11/30244204 DC : 0 BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
    00/107021 DC : DRAFT OCT 2000 BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES
    UNI EN 15162 : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
    I.S. EN 692:2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
    97/718229 DC : DRAFT NOV 1997 PREN 13064 - CERAMIC MACHINES - SAFETY - SETTING AND DEHACKING OF HEAVY CLAY AND REFRACTORY PRODUCTS
    BS EN 12012-1 : 2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    PREN 16282-3 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
    I.S. EN 12478:2000 SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
    BS EN 16282-3:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements
    CEI UNI EN 45510-6-8 : 2000 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 6-8: TURBINE AUXILIARIES - CRANES
    04/30123607 DC : DRAFT OCT 2004 EN 15061:2004 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT
    07/30172338 DC : DRAFT DEC 2007 BS EN 1114-1 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
    13/30291771 DC : DRAFT DEC 2013 BS EN 378-1 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - PART 1: BASIC REQUIREMENTS, DEFINITIONS, CLASSIFICATION AND SELECTION CRITERIA
    DIN EN 15162 E : 2008 MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY REQUIREMENTS FOR GANG SAWS
    08/30185056 DC : DRAFT SEP 2008 BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS
    UNI EN 1501-3 : 2008 REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES
    DIN EN 13035-2:2008-10 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
    09/30202538 DC : DRAFT JUN 2009 BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    95/710328 DC : 0 PREN 12044 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURE MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
    00/706812 DC : DRAFT MAR 2000 BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    14/30303747 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS
    PREN 676 : DRAFT 2012 FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    07/30170114 DC : 0 BS EN 201 - PLASTICS AND RUBBER MACHINES - INJECTION MOULDING MACHINES - SAFETY REQUIREMENTS
    06/30156494 DC : 0 BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES
    04/30126179 DC : DRAFT DEC 2004 EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
    02/714362 DC : DRAFT DEC 2002 EN 12312-20 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: GROUND POWER EQUIPMENT
    01/711762 DC : DRAFT SEP 2001 BS EN 14238 - CRANES - MANUALLY CONTROLLED LOAD MANIPULATING DEVICES
    BS EN 61029-1 : 2009 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    04/30124187 DC : 0 PREN 415-8 - SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    04/19987464 DC : 0 BS EN 15027 - TRANSPORTABLE WALL SAW AND WIRE SAW EQUIPMENT FOR JOB SITE - SAFETY
    05/19981951 DC : 0 BS EN 1034-13 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: AUXILIARY EQUIPMENT FOR DE-WIRING BALES AND UNITS
    EN 957-2:2003 Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods
    BS EN 16282-2:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
    14/30298212 DC : 0 BS EN 12453 - INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS
    I.S. EN 14753:2007 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR CONTINUOUS CASTING OF STEEL
    11/30244207 DC : 0 BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS - DESIGN AND SAFETY REQUIREMENTS
    96/107552 DC : DRAFT OCT 1996 BS EN 12609 - TRUCKMIXERS - SAFETY REQUIREMENTS
    97/720420 DC : DRAFT DEC 1997 EN 1009-4 - FEEDING, CRUSHING, MILLING, SIZING AND SORTING MACHINES FOR MECHANICAL PROCESSING OF MINERALS AND SIMILAR SOLID MATERIALS - SAFETY - PART 4: SIZING AND SORTING MACHINERY
    14/30303759 DC : 0 BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS
    BS EN 14886:2008 Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements
    95/710329 DC : DRAFT JUL 1995 PREN 12042 - FOOD PROCESSING MACHINERY - AUTOMATIC DIVIDERS - SAFETY AND HYGIENE REQUIREMENTS
    03/112610 DC : DRAFT AUG 2003 EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY
    07/30161910 DC : 0 BS EN 15649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES
    00/705761 DC : DRAFT FEB 2000 PREN 13814 - FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    01/105375 DC : DRAFT JUL 2001 BS EN 474-3 EARTH-MOVING MACHINERY - SAFETY - PART 3: REQUIREMENTS FOR LOADERS
    I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    I.S. EN 16282-4:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
    BS EN 474-1 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    I.S. EN 13684:2004 GARDEN EQUIPMENT - PEDESTRIAN CONTROLLED LAWN AERATORS AND SCARIFIERS - SAFETY
    EN 12012-1:2007+A1:2008 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators
    DIN EN 81-80:2004-02 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - PART 80: RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
    BS EN 474-1:2006+A6:2019 Earth-moving machinery. Safety General requirements
    EN 1756-1:2001+A1:2008 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
    PREN 16282-8 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING
    I.S. EN 16282-3:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
    DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
    BS EN 12965 : 2003 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
    I.S. EN 12733:2001 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
    BS EN 12301 : 2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    DIN EN 14985:2012-05 Cranes - Slewing jib cranes
    NF EN 1974 : 1998 + A1 2009 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    I.S. EN 81-80:2004 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXISTING LIFTS - RULES FOR THE IMPROVEMENT OF SAFETY OF EXISTING PASSENGER AND GOODS PASSENGER LIFTS
    NF EN 13525 : 2005 + A2 2009 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    I.S. EN 12301:2000 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    EN 13035-3:2003 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines
    UNI EN 12965 : 2010 TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - POWER TAKE-OFF (PTO) DRIVE SHAFTS AND THEIR GUARDS - SAFETY
    DIN EN 908:2009-12 Agricultural and forestry machinery - Reel machines for irrigation - Safety (includes Amendment A1:2009)
    EN 620:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
    DIN EN 415-3:2010-07 Safety of packaging machines - Part 3: Form, fill and seal machines (includes Amendment A1:2009)
    DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    DIN EN 618:2011-06 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
    DIN EN 14658 E : 2010 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
    DIN EN 1114-3:2015-12 (Draft) PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    DIN EN 706:2009-12 Agricultural machinery - Vine shoot tipping machines - Safety (includes Amendment A1:2009)
    BS EN 547-2 : 1997 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
    10/30216944 DC : 0 BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH
    BS EN 415-5 : 2006 SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
    BS EN 547-1 : 1997 SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY
    BS EN 1010-3 : 2002 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 3: CUTTING MACHINES
    BS EN 1612-2 : 2000 PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES - PART 2: SAFETY REQUIREMENTS FOR REACTION MOULDING PLANT
    BS EN 1028-1 : 2002 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
    BS EN 415-4:1998 Safety of packaging machines Palletizers and depalletizers
    UNE-EN 12621:2006 Machinery for the supply and circulation of coating materials under pressure - Safety requirements
    DIN EN 12301:2010-02 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    BS EN 957-2:2003 Stationary training equipment Strength training equipment,additional specific safety requirements and test methods
    BS EN 13525 : 2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    BS EN 13389 : 2005 FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 908 : 1999 AGRICULTURAL AND FORESTRY MACHINERY - REEL MACHINES FOR IRRIGATION - SAFETY
    BS EN 1889-2 : 2003 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    BS EN 12417 : 2001 MACHINE TOOLS - SAFETY - MACHINING CENTRES
    BS EN 12840:2001 Safety of machine tools. Manually controlled turning machines with or without automatic control
    BS EN 931 : 1998 FOOTWEAR MANUFACTURING MACHINES - LASTING MACHINES - SAFETY REQUIREMENTS
    BS EN 415-3 : 2000 SAFETY OF PACKAGING MACHINES - PART 3: FORM, FILL AND SEAL MACHINES
    BS EN 1756-2 : 2004 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 2: TAIL LIFTS FOR PASSENGERS
    BS EN 619 : 2002
    BS EN 13736 : 2003 SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES
    BS EN 703 : 2004 AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY
    BS EN 1010-4 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES
    BS EN 12336 : 2005 TUNNELLING MACHINES - SHIELD MACHINES, THRUST BORING MACHINES, AUGER BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 12621 : 2006 MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
    BS EN 1034-4 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 4: PULPERS AND THEIR LOADING FACILITIES
    BS EN 13112 : 2002 TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
    BS EN 12312-20 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 20: ELECTRICAL GROUND POWER UNITS
    UNE-EN 13288:2006 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
    BS EN 81-1 : 1998 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
    EN 13525:2005+A2:2009 Forestry machinery - Wood chippers - Safety
    BS EN 1553:2000 Agricultural machinery. Agricultural self-propelled mounted, semi-mounted and trailed machines. Common safety requirements
    BS EN 1034-6 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER
    BS EN 12012-3 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
    BS EN 349 : 1993 SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
    BS EN 13140 : 2000 AGRICULTURAL MACHINERY - SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT - SAFETY
    BS EN 13042-1 : 2007 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF HOLLOW GLASS - SAFETY REQUIREMENTS - PART 1: GOB FEEDER
    BS EN 81-2 : 1998 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
    BS EN 930 : 1997 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES - SAFETY REQUIREMENTS
    BS EN 13021 : 2003 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
    BS EN 12717 : 2001 SAFETY OF MACHINE TOOLS - DRILLING MACHINES
    UNE-EN 13114:2002 Tannery machines- Rotating process vessels - Safety requirements.
    BS EN 1034-2 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 2: BARKING DRUMS
    BS EN 13985 : 2003 MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS
    UNE-EN 12505:2001 FOOD PROCESSING MACHINERY. CENTRIFUGAL MACHINES FOR PROCESSING EDIBLE OILS AND FATS. SAFETY AND HYGIENE REQUIREMENTS
    BS EN 14985:2012 Cranes. Slewing jib cranes
    BS EN 13288 : 2005 FOOD PROCESSING MACHINERY - BOWL LIFTING AND TILTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
    BS EN 1756-1 : 2001 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
    BS EN 415-7 : 2006 SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
    BS EN 693 : 2001 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
    UNI EN 12301 : 2008 PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
    BS EN 14070 : 2003 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    BS EN 14010 : 2003
    UNE-EN 619:2003 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads.
    UNE-EN 617:2002 Continuous handling equipment and systems- Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers.
    BS EN 12044 : 2005 FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS
    BS EN 12415:2001 Safety of machine tools. Small numerically controlled turning machines and turning centres
    BS EN 12957 : 2001 MACHINE TOOLS - SAFETY - ELECTRO DISCHARGE MACHINES
    UNE-EN 13112:2002 Tannery machines - Splitting and bandknife shearing machines - Safety requirements.
    BS EN 13788:2002 Machine tools. Safety. Multi-spindle automatic turning machines
    BS EN 676 : 2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    UNE-EN 13000:2010 Cranes - Mobile cranes
    BS EN 13114 : 2002 TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
    BS EN 13862 : 2001 FLOOR CUTTING-OFF MACHINES - SAFETY
    BS EN 1034-7 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 7: CHESTS
    BS EN ISO 11111:1996 Safety requirements for textile machinery
    I.S. EN 13525:2005 FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
    UNE-EN 1756-2:2005 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
    BS EN 1114-3 : 2001 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
    UNE-EN 13525:2005 Forestry machinery - Wood chippers - Safety
    UNE-EN 13140:2001 AGRICULTURAL MACHINERY. SUGAR BEET AND FODDER BEET HARVESTING EQUIPMENT. SAFETY.
    UNE-EN 13389:2006 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements.
    09/30205281 DC : 0 BS EN 50191 - ERECTION AND OPERATION OF ELECTRICAL TEST EQUIPMENT
    BS EN 1088 : 1995 SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
    UNE-EN 620:2002 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
    BS EN 791 : 1996 DRILL RIGS - SAFETY
    UNE-EN 618:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors.
    ISO 11111-7:2005 Textile machinery Safety requirements Part 7: Dyeing and finishing machinery
    DIN EN 999:2008-10 SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEED OF PARTS OF THE HUMAN BODY
    DIN EN 81-2:2010-08 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
    EN 908:1999+A1:2009 Agricultural and forestry machinery - Reel machines for irrigation - Safety
    EN 706:1996+A1:2009 Agricultural machinery - Vine shoot tipping machines - Safety
    EN 13140:2000+A1:2009 Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety
    EN 13788 : 2001 MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES
    EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
    EN 13814:2004 Fairground and amusement park machinery and structures - Safety
    EN 13898:2003+A1:2009/AC:2010 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    EN 692:2005+A1:2009 Machine tools - Mechanical presses - Safety
    EN 14861:2004+A1:2009 Forest machinery - Self propelled machinery - Safety requirements
    EN 15067:2007 Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
    EN 907 : 1997 AGRICULTURAL AND FORESTRY MACHINERY - SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS - SAFETY
    EN 619:2002+A1:2010 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
    EN 14466:2005+A1:2008 Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests
    EN 415-4:1997/AC:2002 SAFETY OF PACKAGING MACHINES - PART 4: PALLETISERS AND DEPALLETISERS
    EN 415-7:2006+A1:2008 Safety of packaging machines - Part 7: Group and secondary packaging machines
    EN 415-8:2008 Safety of packaging machines - Part 8: Strapping machines
    EN 14985:2012 Cranes - Slewing jib cranes
    EN 81-2 : 1998 + A3 2009 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS
    EN 14910:2007+A1:2009 Garden equipment - Walk-behind combustion engine powered trimmers - Safety
    EN 15164:2008 Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain- and belt-slotting machines
    EN 999:1998+A1:2008 Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body
    UNI EN 13021 : 2009 WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
    EN 1612-2:2000+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 2: Safety requirements for reaction moulding plant
    EN 14238:2004+A1:2009 Cranes - Manually controlled load manipulating devices
    EN 14957:2006+A1:2010 Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requirements
    EN 12581:2005+A1:2010 Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements
    EN 1756-2:2004+A1:2009 Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 2: Tail lifts for passengers
    EN 13218:2002+A1:2008/AC:2010 MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
    EN 930:1997+A2:2009 Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements
    EN 15333-1:2006/AC:2009 FOOD PROCESSING MACHINERY - MACHINERY FOR GRINDING AND PROCESSING FLOUR AND SEMOLINA - SAFETY AND HYGIENE REQUIREMENTS
    EN 1870-2:1999/AC:2002 SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS
    EN 709:1997+A4:2009/AC:2012 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED TRACTORS WITH MOUNTED ROTARY CULTIVATORS, MOTOR HOES, MOTOR HOES WITH DRIVE WHEEL(S) - SAFETY
    EN 811 : 1996 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS
    EN 13128:2001+A2:2009/AC:2010 SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES)
    EN 14017:2005+A2:2009 Agricultural and forestry machinery - Solid fertilizer distributors - Safety
    EN 632 : 1995 AGRICULTURAL MACHINERY - COMBINE HARVESTERS AND FORAGE HARVESTERS - SAFETY
    EN 15162:2008 Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws
    EN 81-1:1998+A3:2009 Safety rules for the construction and installation of lifts - Part 1: Electric lifts
    EN 774:1996/A3:2001 GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
    EN 1845:2007 Footwear manufacturing machines - Footwear moulding machines - Safety requirements
    UNI EN 13019 : 2009 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
    EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
    EN 693 : 2001 COR 2011 MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES
    EN 14753:2007 Safety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
    EN 704:1999+A1:2009 Agricultural machinery - Pick-up balers - Safety
    EN 14886:2008 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
    EN 1553 : 1999 AGRICULTURAL MACHINERY - AGRICULTURAL SELF-PROPELLED, MOUNTED, SEMI-MOUNTED AND TRAILED MACHINES - COMMON SAFETY REQUIREMENTS
    EN 791:1995+A1:2009 Drill rigs - Safety
    EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
    EN 745:1999+A1:2009 Agricultural machinery - Rotary mowers and flail-mowers - Safety
    EN 1889-2:2003+A1:2009 Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives
    EN 14010:2003+A1:2009 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
    EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
    EN 14018:2005+A1:2009 Agricultural and forestry machinery - Seed drills - Safety
    EN 415-5:2006+A1:2009 Safety of packaging machines - Part 5: Wrapping machines
    EN 786:1996+A2:2009 Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety
    EN 13390:2002+A1:2009 Food processing machinery - Pie and tart machines - Safety and hygiene requirements
    EN 1454 : 1997 PORTABLE, HAND-HELD, INTERNAL COMBUSTION CUTTING-OFF MACHINES - SAFETY
    EN 1012-2:1996+A1:2009 Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
    EN 931:1997+A2:2009 Footwear manufacturing machines - Lasting machines - Safety requirements
    EN 1028-1:2002+A1:2008 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements
    EN 14658:2005+A1:2010 Continuous handling equipment and systems - General safety requirements for continuous handling equipment for opencast lignite mining
    EN 14070:2003+A1:2009/AC:2010 SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES
    EN 13736:2003+A1:2009 Safety of machine tools - Pneumatic presses
    I.S. EN 12012-4:2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    05/30129951 DC : 0 EN 15164 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES
    I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    PREN 12693 : DRAFT 1996 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS
    11/30244198 DC : 0 BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
    I.S. EN 774:1996 GARDEN EQUIPMENT - HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS - SAFETY
    PREN 16282-4 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS
    04/30111716 DC : DRAFT MAR 2004 EN 14910 - GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
    03/306044 DC : DRAFT APR 2003 BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
    09/30187535 DC : 0 BS EN 13000 - CRANES - MOBILE CRANES
    05/30076959 DC : DRAFT APR 2005 BS EN 12453 - INDUSTRIAL COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER-OPERATED DOORS - REQUIREMENTS
    03/306594 DC : DRAFT APR 2003 BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE
    03/306595 DC : 0 BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
    98/717506 DC : DRAFT DEC 1998 PREN 13389 - FOOD PROCESSING MACHINERY - MIXERS WITH HORIZONTAL SHAFTS - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 415-8:2011-06 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    I.S. EN 12417:2001 MACHINE TOOLS - SAFETY - MACHINING CENTRES
    14/30303744 DC : 0 BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
    04/30113996 DC : 0 PREN 81-41 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
    97/700976 DC : DRAFT JAN 1997 PREN 12692 - CERAMIC MACHINES - SAFETY - PRESSES
    08/30180969 DC : DRAFT APR 2008 BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
    02/706761 DC : DRAFT MAY 2002 PREN 14461 - INDUSTRIAL FANS - SAFETY REQUIREMENTS
    00/717064 DC : DRAFT NOV 2000 PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES
    DIN EN 15746-2:2016-02 (Draft) Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015
    11/30244201 DC : 0 BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
    11/30244213 DC : 0 BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING
    06/30156491 DC : 0 BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONES - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
    07/30166058 DC : 0 BS EN 15700 - SAFETY OF TRAVELATORS FOR TOURIST OR SPORTING USE, USED TO TRANSPORT PASSENGERS MAINLY IN SKI AREAS
    97/700630 DC : DRAFT JAN 1997 PREN 12693 - REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - REFRIGERANT COMPRESSORS
    06/30147145 DC : 0 EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
    BS ISO 20957-2:2005 Stationary training equipment Strength training equipment. Additional specific safety requirements and test methods
    00/708470 DC : DRAFT APR 2000 PREN 13886 - FOOD PROCESSING MACHINERY - COOKING KETTLES EQUIPPED WITH STIRRER AND/OR MIXER - SAFETY AND HYGIENE
    07/30164729 DC : 0 BS EN 12999 - CRANES - LOADER CRANES
    PREN 16282-2 : DRAFT 2014 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS; DESIGN AND SAFETY REQUIREMENTS
    96/108461 DC : 0 PREN 12649 - CONCRETE COMPACTORS AND FLOATING MACHINES - SAFETY REQUIREMENTS
    05/19981969 DC : DRAFT JUN 2005 BS EN 1034-5 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 5: SHEETERS
    02/711304 DC : DRAFT SEP 2002 BS EN 415-5 - PACKAGING MACHINES SAFETY - PART 5: WRAPPING MACHINES
    02/705139 DC : DRAFT APR 2002 PREN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING
    08/30179926 DC : DRAFT MAR 2008 BS EN 60335-2-77 - SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS
    04/30113842 DC : DRAFT MAY 2004 PREN 14957 - FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    DIN EN 13035-2 E : 2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
    I.S. EN 13035-2:2008 MACHINES AND PLANTS FOR THE MANUFACTURE, TREATMENT AND PROCESSING OF FLAT GLASS - SAFETY REQUIREMENTS - PART 2: STORAGE, HANDLING AND TRANSPORTATION EQUIPMENT OUTSIDE THE FACTORY
    BS EN 14017 : 2005 AGRICULTURAL AND FORESTRY MACHINERY - SOLID FERTILIZER DISTRIBUTORS - SAFETY
    EN 13000:2010+A1:2014 Cranes - Mobile cranes
    DIN EN 1853:2015-11 (Draft) AGRICULTURAL MACHINERY - TRAILERS WITH TIPPING BODY - SAFETY
    NFP 82 212 : 2005 LIFTS - SAFETY RULES FOR THE CONSTRUCTIONS AND INSTALLATION OF ELECTRIC LIFTS - SPECIFICATIONS APPLICABLE IN THE CASE OF THE IMPORTANT MODIFICATIONS OR IMPROVEMENT WORK
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    BS EN 12733 : 2001 AGRICULTURAL AND FORESTRY MACHINERY - PEDESTRIAN CONTROLLED MOTOR MOWERS - SAFETY
    I.S. EN 415-8:2008 SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
    BS EN 15746-2 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
    15/30279801 DC : 0 BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements
    DIN EN 619:2011-02 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads (includes Amendment A1:2010)
    EN 12733:2001+A1:2009 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety
    I.S. EN 12012-1:2007 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    I.S. EN 676:2003 AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS
    DIN EN 13390:2011-02 Food processing machinery - Pie and tart machines - Safety and hygiene requirements (includes Amendment A1:2009)
    DIN EN 13448:2010-02 Agricultural and forestry machinery - Inter-row mowing units - Safety (includes Amendment A1:2009)
    DIN EN 12012-4:2010-01 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    DIN EN 1028-1:2008-09 FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS
    DIN EN 12198-3:2008-11 SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
    DIN EN 1501-2:2010-02 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009)
    DIN EN 709:2011-06 Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety (includes Amendment A4:2009)
    BS EN 745 : 1999 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
    BS EN 12012-4 : 2006 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
    DIN EN 1889-2:2009-07 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES
    BS EN 13019 : 2001 MACHINES FOR ROAD SURFACE CLEANING - SAFETY REQUIREMENTS
    BS EN 14957 : 2006 FOOD PROCESSING MACHINERY - DISHWASHING MACHINES WITH CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 1845:2007 Footwear manufacturing machines. Footwear moulding machines. Safety requirements
    BS EN 1034-13 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 13: MACHINES FOR DE-WIRING BALES AND UNITS
    BS EN 13200-4:2006 Spectator facilities Seats. Product characteristics
    BS EN 692 : 2005 MACHINE TOOLS - MECHANICAL PRESSES - SAFETY
    BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
    BS EN 12581 : 2005 COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
    BS EN 12012-2 : 2001 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
    BS EN 1454:1997 Portable, hand-held, internal combustion cutting-off machines. Safety
    ISO 11111-3:2005 Textile machinery Safety requirements Part 3: Nonwoven machinery
    BS EN 1034-22 : 2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 22: WOOD GRINDERS
    BS EN 617 : 2001
    BS EN 14910 : 2007 GARDEN EQUIPMENT - WALK-BEHIND COMBUSTION ENGINE POWERED TRIMMERS - SAFETY
    BS EN 14658 : 2005 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - GENERAL SAFETY REQUIREMENTS FOR CONTINUOUS HANDLING EQUIPMENT FOR OPENCAST LIGNITE MINING
    BS EN 13390 : 2002 FOOD PROCESSING MACHINERY - PIE AND TART MACHINES - SAFETY AND HYGIENE REQUIREMENTS
    BS EN 12921-1 : 2005 MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS
    DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
    EN 1114-3:2001+A1:2008 Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs
    EN 1034-22:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
    DIN EN 704:1999-08 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
    EN 115:1995/A2:2004 SAFETY RULES FOR THE CONSTRUCTION & INSTALLATION OF ESCALATORS & PASSENGER CONVEYORS
    EN 13288:2005+A1:2009 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements
    EN 1034-14:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
    EN 12415:2000/A1:2002 SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES
    EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
    EN 12387:2005+A1:2009 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
    DIN EN 13035-1:2008-06 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
    EN 61029-1:2009/A11:2010 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    DIN EN 745:1999-08 AGRICULTURAL MACHINERY - ROTARY MOWERS AND FLAIL-MOWERS - SAFETY
    EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements
    UNI EN 1756-1 : 2008 TAIL LIFTS - PLATFORM LIFTS FOR MOUNTING ON WHEELED VEHICLES - SAFETY REQUIREMENTS - PART 1: TAIL LIFTS FOR GOODS
    DIN EN 1114-2:1998-06 PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
    EN 1034-4:2005+A1:2009 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
    DIN EN 14886:2008-06 Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
    UNI EN 620 : 2011 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - SAFETY AND EMC REQUIREMENTS FOR FIXED BELT CONVEYORS FOR BULK MATERIALS
    EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
    EN 13862:2001+A1:2009 Floor cutting-off machines - Safety
    DIN EN 81-1:2000-05 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
    DIN EN 81-1:2010-06 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS
    EN 13200-4:2006 Spectator facilities - Part 4: Seats - Product characteristics
    DIN EN 13898:2009-09 MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL
    EN 12957:2001+A1:2009 Machine tools - Safety - Electro discharge machines
    EN 12840 : 2001 SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
    EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
    DIN EN 14861:2011-06 FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
    DIN EN 12151:2008-05 MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS
    EN 13035-1:2008 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
    EN 13389:2005+A1:2009 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements
    EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles
    DIN EN 15746-2:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011)
    DIN EN 12012-1:2010-02 PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
    DIN EN 704:2009-12 AGRICULTURAL MACHINERY - PICK-UP BALERS - SAFETY
    UNE-EN 415-3:2000 Safety of packaging machines. Part 3: Form, fill and seal machines.
    UNE-EN 1034-5:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
    UNE-EN 1034-2:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
    UNE-EN 12203:2004 Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements
    UNE-EN 13390:2002 Food processing machinery- Pie and tart machines - Safety and hygiene requirements.
    UNE-EN 12757-1:2006+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    UNE-EN 1501-2:2006 Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles
    UNE-EN 1673:2001 Food procesing machinery. Rotatory rack ovens. Safety and hygiene requirements.
    UNE-EN 1034-22:2006 Safety of machinerie - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
    UNE-EN 15746-2:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements
    UNE-EN 1010-4:2004 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
    UNE-EN 12757-1:2006 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    UNE-EN 14658:2006 Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
    UNE-EN 415-5:2007 Safety of packaging machines - Part 5: Wrapping machines
    UNE-EN 1010-3:2003 Safety of machinery. Safety requirements for the design and construction of printing and paper converting machines. Part 3: Cutting machines.
    UNE-EN 1034-6:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
    UNE-EN 12044:2006 Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
    UNE-EN 1034-14:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
    UNE-EN 1034-7:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
    UNE-EN 1034-4:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities
    UNE-EN 14018:2006 Agricultural and forestry machinery - Seed drills - Safety
    UNE-EN 1034-13:2006 Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
    UNE-EN 1012-2:1996 COMPRESSORS AND VACUUM PUMPS. SAFETY REQUIREMENTS. PART 2: VACUUM PUMPS.

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
    AS 4024.3701:2020 Safety of machinery Forestry machinery - Wood chippers - Safety (EN 13525:2005+A2:2009, MOD)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective