EN 60950-1:2006/A2:2013

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)

Available format(s):

Superseded date: 01-05-2015

Language(s):

Published date: 12-01-2013

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
0 Principles of safety
1 General
2 Protection from hazards
3 Wiring, connections and supply
4 Physical requirements
5 Electrical requirements and simulated abnormal
  conditions
6 Connection to telecommunication networks
7 Connection to cable distribution systems
Annex A (normative) - Tests for resistance to heat and fire
Annex B (normative) - Motor tests under abnormal conditions
Annex C (normative) - Transformers
Annex D (normative) - Measuring instruments for touch current
        tests
Annex E (normative) - Temperature rise of a winding
Annex F (normative) - Measurement of clearances and creepage
        distances
Annex G (normative) - Alternative method for determining
        minimum clearances
Annex H (normative) - Ionizing radiation
Annex J (normative) - Table of electrochemical potentials
Annex K (normative) - Thermal controls
Annex L (normative) - Normal load conditions for some types
        of electrical business equipment
Annex M (normative) - Criteria for telephone ringing signals
Annex N (normative) - Impulse test generators
Annex P (normative) - Normative references
Annex Q (normative) - Voltage dependent resistors (VDRs)
Annex R (informative) - Examples of requirements for quality
        control programmes
Annex S (informative) - Procedure for impulse testing
Annex T (informative) - Guidance on protection against ingress
        of water
Annex U (normative) - Insulated winding wires for use without
        interleaved insulation
Annex V (normative) - AC power distribution systems
Annex W (informative) - Summation of touch currents
Annex X (informative) - Maximum heating effect in transformer
        tests
Annex Y (normative) - Ultraviolet light conditioning test
Annex Z (informative) - Overvoltage categories
Annex AA (normative) - Mandrel test
Annex BB (informative) - Changes in the second edition
Annex CC (normative) - Evaluation of integrated circuit (IC)
         current limiters
Annex DD (normative) - Requirements for the mounting means of
         rack-mounted equipment
Annex EE (normative) - Household and home/office document/media
         shredders
Bibliography
Index
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications
Annex ZB (normative) - Special national conditions
Annex ZC (informative) - A-deviations
Annex ZD (informative) - IEC and CENELEC code designations
         for flexible cords
Annex Zx (informative) - Significance of L[Aeq,T] in EN 50332-1
         and additional information

Abstract - (Show below) - (Hide below)

Pertains to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V.

General Product Information - (Show below) - (Hide below)

Committee	TC 108
Development Note	Supersedes EN 60950 (03/2002)
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Superseded
Superseded By	EN 62368-1:2014
Supersedes	EN 60950:2000/corrigendum:2002

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
VDE 0805-1 : 2014	Identical
DIN EN 60950-1 : 2014	Identical
NEN EN IEC 60950-1 : 2006 AMD 2 2013	Identical
CEI EN 60950-1/A1 : 2014	Identical
NBN EN 60950-1 : 2006 AMD 4 2013	Identical
PN EN 60950-1 : 2007 AMD 2 2014	Identical
SN EN 60950-1 : 2006 AMD 12 2011	Identical
NF EN 60950-1 : 2006 AMD 2 2014	Identical
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV	Identical
UNE-EN 60950-1:2007	Identical
BS EN 60950-1:2006+A2:2013	Identical
BS EN 60950-1 : 2006	Identical
BS EN 61196-10:2016	Identical
I.S. EN 60950-1:2006	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

06/30147135 DC : 0	HD 638 S2 AMD 1 - ROAD TRAFFIC SIGNAL SYSTEMS
NF EN 15437-1 : 2009	RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 1: TRACK SIDE EQUIPMENT AND ROLLING STOCK AXLEBOX
BS EN 16314:2013	Gas meters. Additional functionalities
CEI EN 60950-21 : 2004	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 21: REMOTE POWER FEEDING
BS EN 81-41:2010	Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Vertical lifting platforms intended for use by persons with impaired mobility
CEI EN 62282-6-300 : 2013	FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY
BS EN 62149-7:2012	Fibre optic active components and devices. Performance standards 1310 nm discrete vertical cavity surface emitting laser devices
BS EN 62149-2:2014	Fibre optic active components and devices. Performance standards 850 nm discrete vertical cavity surface emitting laser devices
12/30258455 DC : 0	FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
EN 63002:2017	Identification and communication interoperability method for external power supplies used with portable computing devices
DIN EN 14154-4:2015-02	Water meters - Part 4: Additional functionalities
BS EN 50332-1:2013	Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology General method for \'one package equipment\'
TS 102 639-2 : 1.1.1	ACCESS AND TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); THIRD GENERATION TRANSMISSION SYSTEMS FOR INTERACTIVE CABLE TELEVISION SERVICES - IP CABLE MODEMS; PART 2: PHYSICAL LAYER
BS EN 62820-1-1:2016	Building intercom systems System requirements. General
BS EN 62471-5:2015	Photobiological safety of lamps and lamp systems Image projectors
BS EN 60695-1-10:2017	Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. General guidelines
BS EN 62040-5-3:2017	Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
BS EN 62274:2005	Medical electrical equipment. Safety of radiotherapy record and verify systems
11/30251720 DC : 0	BS EN 81-50 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
BS EN 50090-2-3:2005	Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES
I.S. EN 50132-5-3:2012	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
CLC/TR 62102:2006	Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks
BS EN 60601-1-12:2015	Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
BS EN 62282-3-100:2012	Fuel cell technologies Stationary fuel cell power systems. Safety
I.S. EN 50486:2008	EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
BS EN 62282-6-300:2013	Fuel cell technologies Micro fuel cell power systems. Fuel cartridge interchangeability
10/30227671 DC : 0	BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS EN 62282-3-1:2007	Fuel cell technologies Stationary fuel cell power systems. Safety
BS EN 50132-1:2010	Alarm systems. CCTV surveillance systems for use in security applications System requirements
BS EN 12966:2014	Road vertical signs. Variable message traffic signs
I.S. EN 50090-2-3:2005	HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES
BS EN 62353:2014	Medical electrical equipment. Recurrent test and test after repair of medical electrical equipment
BS EN 62083:2009	Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems
PREN 12405-3 : DRAFT 2013	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
BS EN 50116:2006	Information technology equipment. Routine electrical safety testing in production
TR 102 702 : 1.1.1	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM) STUDY OF ISSUES RELATED TO POTS INJECTION IN THE CUSTOMER WIRING FROM XDSL VOIP HOME GATEWAY
UNI EN 81-40 : 2009	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIR LIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
CEI EN 50557 : 2012	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES
BS EN 50131-1 : 2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
DIN EN 12405-3:2016-04	Gas meters - Conversion devices - Part 3: Flow computer
DIN EN 12405-2:2012-10	GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
I.S. EN 62345:2005	ID FORMAT FOR 50 MM MAGNETO-OPTICAL DISC SYSTEM
EN 81-41:2010	Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
I.S. EN 62109-1:2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 12405-2:2012	GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
BS EN 60728-11:2017	Cable networks for television signals, sound signals and interactive services Safety
BS EN 62040-1 : 2008	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS
I.S. EN 62040-1-1:2004
I.S. EN 62149-5:2011	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
I.S. EN 60896-21:2004	STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
I.S. EN 14154-4:2014	WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
I.S. EN 50468:2009	RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS
BS EN 50539-11 : 2013	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
I.S. EN 60601-2-66:2015	MEDICAL ELECTRICAL EQUIPMENT - PART-2-66: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HEARING INSTRUMENTS AND HEARING INSTRUMENT SYSTEMS
BS EN 12405-1 : 2005	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 61347-1:2015	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 50332-1:2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 1: GENERAL METHOD FOR ONE PACKAGE EQUIPMENT
I.S. EN 62282-6-100:2010	FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010 (EQV))
UNI EN 12405-1 : 2010	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 62488-2:2017	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
UNE-EN 50468:2010	Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
UNE-EN 60728-3:2012	Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
I.S. EN 41003:2008	PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM
EN 13617-1:2012	Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
EN 60950-22:2017	Information technology equipment - Safety - Part 22: Equipment to be installed outdoors
BS EN 13160-1:2003	Leak detection systems General principles
BS EN 61347-1:2015	Lamp controlgear General and safety requirements
BS EN 62477-1 : 2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
EN 61347-1:2015	Lamp controlgear - Part 1: General and safety requirements
EN 60598-2-12:2013	Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
EN 60695-1-10:2017	Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
EN 12405-2:2012	Gas meters - Conversion devices - Part 2: Energy conversion
EN 1010-2:2006+A1:2010	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
EN 60950-23:2006/corrigendum:2008	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
EN 62282-3-1 : 2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
EN 62149-7 : 2012	Fibre optic active components and devices - Performance standards - Part 7: 1 310 nm discrete vertical cavity surface emitting laser devices
EN 62345:2005	ID format for 50 mm magneto-optical disc system
EN 50132-5-3:2012	Alarm systems - CCTV surveillance systems for use in security applications - Part 5-3: Video transmission - Analogue and digital video transmission
EN 62282-2:2012	Fuel cell technologies - Part 2: Fuel cell modules
EN 12182:2012	Assistive products for persons with disability - General requirements and test methods
EN 61347-2-13:2014/A1:2017	LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES
EN 50539-11 : 2013 AMD 1 2014	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
EN 80601-2-58:2015	Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
EN 62040-5-3:2017	Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
EN 61131-2:2007	Programmable controllers - Part 2: Equipment requirements and tests
EN 61851-1:2011	Electric vehicle conductive charging system - Part 1: General requirements
EN 50098-1 : 98 COR 1 2003	CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY - PART 1: ISDN BASIC ACCESS
EN 62676-1-1:2014/AC:2014	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL (IEC 62676-1-1:2013)
EN 61558-2-16:2009/A1:2013	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1 100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS (IEC 61558-2-16:2009/A1:2013)
EN 50332-2:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
EN 62684:2010	Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
EN 62040-1-2:2003/corrigendum:2004
EN 50514:2014	Audio, video and information technology equipment - Routine electrical safety testing in production
EN 13160-1:2016	Leak detection systems - Part 1: General Principles
HD 638 S1:2001/A1:2006	ROAD TRAFFIC SIGNAL SYSTEMS
EN 62353:2014	Medical electrical equipment - Recurrent test and test after repair of medical electrical equipment
08/30180887 DC : DRAFT MAY 2008	BS EN 50131-4 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
BS EN 62282-5-1:2012	Fuel cell technologies Portable fuel cell power systems. Safety
EN IEC 61730-2:2018/AC:2018-06	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016)
I.S. EN 60950-23:2008	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
PREN 12405-1 : DRAFT 2017	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
PD CLC/TR 50656:2016	SPD application in conjunction with Class II equipment
UNI EN 81-41 : 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
BS EN 15437-1:2009	Railway applications. Axlebox condition monitoring. Interface and design requirements Track side equipment and rolling stock axlebox
13/30281665 DC : 0	BS EN 50332-2 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY
BS EN 81-50:2014	Safety rules for the construction and installation of lifts. Examinations and tests Design rules, calculations, examinations and tests of lift components
CEI EN 62149-4 : 2011	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION
BS EN 63002 : 2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
PREN 81-50 : DRAFT 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
14/30301251 DC : 0	BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
UNE-EN 60601-2-66:2016	Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
07/19986727 DC : 0	BS EN 50132-1 - ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 62282-3-1:2007	FUEL CELL TECHNOLOGIES - PART 3-1: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
BS EN 60601-2-66:2015	Medical electrical equipment Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS EN 62040-1-1:2003	Uninterruptible power systems (UPS) General and safety requirements for UPS used in operator access areas
BS EN 62676-1-1:2014	Video surveillance systems for use in security applications System requirements. General
CEI EN 62056-7-5 : 1ED 2017	ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN)
CEI EN 62488-2 : 1ED 2018	POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
BS EN 60940:2015	Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
CEI EN 62274 : 2005	MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS
CEI EN 50486 : 2009	EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR-ENTRY SYSTEMS
CEI EN 50131-1 : 2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 16314:2013	GAS METERS - ADDITIONAL FUNCTIONALITIES
DIN EN 14154-4 E : 2015	WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
UNE-EN 12405-3:2016	Gas meters - Conversion devices - Part 3: Flow computer
TR 102 121 : 1.2.1	ENVIRONMENTAL ENGINEERING (EE); GUIDANCE FOR POWER DISTRIBUTION TO TELECOMMUNICATION AND DATACOM EQUIPMENT
I.S. EN 62676-1-1:2014	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 50132-1:2010	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 61558-2-16:2009	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
I.S. EN 62149-7:2012	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 7: 1310 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES (IEC 62149-7:2012 (EQV))
I.S. EN 50491-4-1:2012	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
I.S. EN 62310-1:2005	STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 50539-11:2013	LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS
BS EN 60896-21:2004	Stationary lead-acid batteries Valve regulated types. Methods of test
EN 50556:2011	Road traffic signal systems
CEI EN 62684 : 2011	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
CEI EN 50174-3 : 2014	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
I.S. EN IEC 61730-1:2018	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
BS EN 62040-3:2011	Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
DIN EN 81-40:2009-04	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
I.S. EN 61851-23:2014	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION
BS EN 61587-1:2017	Mechanical structures for electronic equipment. Tests for IEC 60917 and IEC 60297 series Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
BS EN 41003:2009	Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system
I.S. EN 60950-21:2003	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - REMOTE POWER FEEDING
I.S. EN 60728-3:2011	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
I.S. EN 63024:2018	REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT-BREAKERS, RCBOS AND RCCBS FOR HOUSEHOLD AND SIMILAR USES
PREN 12182 : 2009-06	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
CEI CLC/TS 62367 : 2005	SAFETY ASPECTS FOR XDSL SIGNALS ON CIRCUITS CONNECTED TO TELECOMMUNICATION NETWORKS (DSL: DIGITAL SUBSCRIBER LINE)
EN 50310:2016	Telecommunications bonding networks for buildings and other structures
I.S. EN 62040-1-2:2004
I.S. EN 62083:2009	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
I.S. EN 62040-3:2011	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 50131-1:2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 62040-1:2008	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008 (EQV))
DIN EN 12182:2012-07	Assistive products for persons with disability - General requirements and test methods
DIN EN 13617-1:2012-08	Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
DIN EN 14604:2016-02 (Draft)	Smoke alarm devices; German and English version prEN 14604:2016
UNE-HD 60364-4-444:2013	Low-voltage electrical installations -- Part 4-444: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
BS EN 15095 : 2007	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 62282-3-100:2012	Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
BS EN 61131-2:2007	Programmable controllers Equipment requirements and tests
UNE-EN 50310:2016	Telecommunications bonding networks for buildings and other structures
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
EN 302 099 : 2.1.1	ENVIRONMENTAL ENGINEERING (EE); POWERING OF EQUIPMENT IN ACCESS NETWORK
I.S. EN 14678-1:2013	LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 15095:2007	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
I.S. EN 12182:2012	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 62282-2:2012	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV))
I.S. EN 13160-1:2016	LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
CEI EN 62282-2 : 2013	FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES
I.S. EN 13617-1:2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
I.S. EN 61918:2013	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
BIS IS 13252-1 : 2010 AMD 1 2013	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
VDI 4478 Blatt 1:2013-07	Test procedure for standardizing the definition of performance of RFID gates for use in libraries
UNE-EN 50557:2012	Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
CEI EN 62040-3 : 2015	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
TS 103 247 : 1.1.1	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); SINGLEMODE OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR HOME CABLING
TS 102 872 : 1.1.1	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); COPPER EXTERNAL NETWORK TESTING INTERFACE
07/30164493 DC : 0	BS EN 14637 - BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATIONS AND MAINTENANCE
DIN EN 1010-2:2011-05	Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery (includes Amendment A1:2010)
BS EN 62149-8:2014	Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier devices
13/30289289 DC : 0	BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
PREN 50332-2 : DRAFT 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY
CEI EN 60896-21 : 2005	STATIONARY LEAD-ACID BATTERIES - PART 21: VALVE REGULATED TYPES - METHODS OF TEST
CEI EN 62368-1 : 2016	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
PREN 13617-1 : DRAFT 2010	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS EN 14154-4:2014	Water meters Additional functionalities
BS EN 50514:2014	Audio, video and information technology equipment. Routine electrical safety testing in production
CEI EN 60728-3 : 2011	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
BS EN 62282-6-100 : 2010	FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY
BS EN 50491-4-1:2012	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
I.S. EN 62282-6-300:2013	FUEL CELL TECHNOLOGIES - PART 6-300: MICRO FUEL CELL POWER SYSTEMS - FUEL CARTRIDGE INTERCHANGEABILITY (IEC 62282-6-300:2012 (EQV))
12/30260552 DC : 0	BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
UNI EN 12405-2 : 2012	GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
I.S. EN 15437-1:2009	RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 1: TRACK SIDE EQUIPMENT AND ROLLING STOCK AXLEBOX
10/30219405 DC : 0	BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS EN 1010-2 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
UNI EN 81-50 : 2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
09/30201992 DC : 0	BS EN 12182 - ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
TS 102 874-6 : 1.1.1	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); EXTERNAL COMMON POWER SUPPLY FOR CUSTOMER PREMISES NETWORK AND ACCESS EQUIPMENT; PART 6: CPS TYPE 2.D IMPLEMENTATION DETAILS
13/30281662 DC : 0	BS EN 50332-1 - SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
CEI EN 50132-5-3 : 2013	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
04/30124466 DC : DRAFT OCT 2004	EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
CEI EN 62282-3-100 : 2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
06/30127082 DC : 0	EN 50486 - EQUIPMENT FOR USE IN AUDIO AND VIDEO DOOR - ENTRY SYSTEMS
PREN 50332-1 : DRAFT 2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PORTABLE AUDIO EQUIPMENT - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY AND LIMIT CONSIDERATIONS - PART 1: GENERAL METHOD FOR "ONE PACKAGE EQUIPMENT"
CEI EN 50468 : 2010	RESISTIBILITY REQUIREMENTS TO OVERVOLTAGES AND OVERCURRENTS DUE TO LIGHTNING FOR EQUIPMENT HAVING TELECOMMUNICATION PORTS
CEI EN 61587-1 : 2012	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
ISO/IEC 14762:2009	Information technology Functional safety requirements for Home and Building Electronic Systems (HBES)
I.S. EN 12966:2014	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
EN 62040-3:2011	Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
UNE-EN 62676-1-1:2015	Video surveillance systems for use in security applications - Part 1-1: System requirements - General
EN 50131-1:2006/A2:2017	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 62149-3:2014	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 3: MODULATOR-INTEGRATED LASER DIODE TRANSMITTERS FOR 2,5-GBIT/S TO 40-GBIT/S FIBRE OPTIC TRANSMISSION SYSTEMS
UTEC 90 481-1 : 2005	A SERVICE TO SET UP AREAS BY A TELECOM OPERATOR IN OPERATOR'S PREMISES
I.S. EN 62056-7-5:2016	ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 7-5: LOCAL DATA TRANSMISSION PROFILES FOR LOCAL NETWORKS (LN)
I.S. EN 12405-3:2015	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
TR 102 436 : 2.1.1	ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD) INTENDED FOR OPERATION IN THE BANDS 865 MHZ TO 868 MHZ AND 915 MHZ TO 921 MHZ; GUIDELINES FOR THE INSTALLATION AND COMMISSIONING OF RADIO FREQUENCY IDENTIFICATION (RFID) EQUIPMENT AT UHF
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
I.S. EN 81-50:2014	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
UNE-EN 62471-5:2016	Photobiological safety of lamps and lamp systems - Part 5: Image projectors
VDS 3112 : DRAFT 2009	BIOMETRIC RECOGNITION PROCEDURES
I.S. EN 81-41:2010	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
BS EN 80601-2-58:2015	Medical electrical equipment Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
NF EN 81-41 : 2011	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
BS EN 60065 : 2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
PREN 13160-1 : DRAFT 2014	LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
CEI EN 62149-7 : 2013	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 7: 1310 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES
I.S. EN 81-40:2008	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY
NF EN 12405-1 : 2005 + A2 2010	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
EN IEC 62688:2018	Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
I.S. EN 60950-1:2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
I.S. EN 50310:2016	TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
NF EN 50556 : 2011	ROAD TRAFFIC SIGNAL SYSTEMS
PREN 50174-3 : DRAFT 2012	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
ES 203 156 : 1.2.1	ENVIRONMENTAL ENGINEERING (EE); THERMAL MANAGEMENT REQUIREMENTS FOR OUTDOOR ENCLOSURES
I.S. EN 63002:2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
ES 202 999 : 1.1.1	SAFETY; REMOTE POWER FEEDING INSTALLATIONS; SAFETY REQUIREMENTS FOR THE ERECTION AND OPERATION OF INFORMATION TECHNOLOGY INSTALLATIONS WITH REMOTE POWER FEEDING
EN 12405-1:2005+A2:2010	Gas meters - Conversion devices - Part 1: Volume conversion
I.S. EN 62149-4:2010	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 4: 1300 NM FIBRE OPTIC TRANSCEIVERS FOR GIGABIT ETHERNET APPLICATION
UNE-EN 60728-11:2012	Cable networks for television signals, sound signals and interactive services - Part 11: Safety
I.S. EN 61851-1:2011	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS
I.S. EN 61587-1:2017	MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - TESTS FOR IEC 60917 AND IEC 60297 SERIES - PART 1: ENVIRONMENTAL REQUIREMENTS, TEST SET-UP AND SAFETY ASPECTS FOR CABINETS, RACKS, SUBRACKS AND CHASSIS UNDER INDOOR CONDITION USE AND TRANSPORTATION
DIN EN 15095 E : 2009	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
DIN EN 14637 E : 2008	BUILDING HARDWARE - ELECTRICALLY CONTROLLED HOLD-OPEN SYSTEMS FOR FIRE/SMOKE DOOR ASSEMBLIES - REQUIREMENTS, TEST METHODS, APPLICATION AND MAINTENANCE
BS EN 61918:2013	Industrial communication networks. Installation of communication networks in industrial premises
UNE-EN 14678-1:2013	LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
BS EN 14637:2007	Building hardware. Electrically controlled hold-open systems for fire/smoke door assemblies. Requirements, test methods, application and maintenance
EN 62149-3:2014	Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
EN 62149-5:2011	Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
CSA C22.2 No. 60950-1 :2007	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 41003:2008	Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60950-1:2007	Information technology equipment - Safety - Part 1: General requirements
EN 60601-1-12:2015	Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
CSA C22.2 No. 60950-1 : 2007 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN 81-40:2008	Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN 13617-1 : 2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 14678-1:2013	LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
EN 50468:2009	Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
UNI EN 15095 : 2009	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 300 132-2 : 2.4.6	ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT; PART 2: OPERATED BY -48 V DIRECT CURRENT (DC)
EN 50116:2006	Information technology equipment - Routine electrical safety testing in production
UNI EN 1010-2 : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
UNI EN 14604 : 2005	SMOKE ALARM DEVICES
UNI EN 12182 : 2012	ASSISTIVE PRODUCTS FOR PERSONS WITH DISABILITY - GENERAL REQUIREMENTS AND TEST METHODS
UNI EN 14678-1 : 2013	LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
EN 50132-1 : 2010 COR 2010	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
BS EN 62149-9:2014	Fibre optic active components and devices. Performance standards Seeded reflective semiconductor optical amplifier transceivers
UNE-EN 62282-3-1:2011	Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety
I.S. EN 62274:2005	MEDICAL ELECTRICAL EQUIPMENT - SAFETY OF RADIOTHERAPY RECORD AND VERIFY SYSTEMS
PREN 14678-1 : DRAFT 2010	LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
PREN 17076 : DRAFT 2017	ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS
UNI EN 15437-1 : 2009	RAILWAY APPLICATIONS - AXLEBOX CONDITION MONITORING - INTERFACE AND DESIGN REQUIREMENTS - PART 1: TRACK SIDE EQUIPMENT AND ROLLING STOCK AXLEBOX
CEI EN 62471-5 : 2016	PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS
DD CLC/TS 50131-4:2006	Alarm systems. Intrusion and hold-up systems Warning devices
BS EN 12405-3:2015	Gas meters. Conversion devices Flow computer
BS EN 62310-3:2008	Static transfer systems (STS) Method for specifying performance and test requirements
08/30188489 DC : DRAFT AUG 2008	BS EN 54-27 - FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
UNE-EN 81-41:2011	Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
NF EN 50491-3 : 2011	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
BS EN 60728-3:2011	Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks
11/30247615 DC : 0	BS EN 16314 - GAS METERS - ADDITIONAL FUNCTIONALITIES
BS EN 50557:2011	Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
UNE-EN 60065:2015	Audio, video and similar electronic apparatus - Safety requirements
CEI EN 61347-1 : 2016	LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
CEI EN 60598-2-12 : 2014	LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS
BS EN 12405-2:2012	Gas meters. Conversion devices Energy conversion
BS EN 62684:2010	Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
DIN EN 12405-3 E : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
BS EN 60950-21:2003	Information technology equipment. Safety Remote power feeding
BS EN 62041:2010	Safety of transformers, reactors, power supply units and combinations thereof. EMC requirements
BS EN 62911:2016	Audio, video and information technology equipment. Routine electrical safety testing in production
12/30258453 DC : 0	BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN 62149-3:2014	Fibre optic active components and devices. Performance standards Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems
CEI EN 62083 : 2011	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
UNE-EN 60598-2-12:2013	Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
07/30174053 DC : 0	BS EN 41003 - PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO TELECOMMUNICATION NETWORKS AND/OR A CABLE DISTRIBUTION SYSTEM
DIN EN 81-50 E : 2015	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
BS EN 54-27:2015	Fire detection and fire alarms systems Duct smoke detectors
BS EN 50332-2:2013	Sound system equipment: Headphones and earphones associated with personal music players. Maximum sound pressure level measurement methodology Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
BS EN 62149-5:2011	Fibre optic active components and devices. Performance standards ATM-PON transceivers with LD driver and CDR ICs
BS EN 50098-1:1999	Customer premises cabling for information technology ISDN basic access
BS EN 60950-22:2017	Information technology equipment. Safety Equipment to be installed outdoors
I.S. EN 60728-11:2017	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
DIN EN 15437-1:2010-06	Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
SCTE 135-1 : 2013	DOCSIS 3.0 - PART 1: PHYSICAL LAYER SPECIFICATION
UNE-EN 15437-1:2010	Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
TR 102 629 : 2.1.2	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); REVERSE POWER FEED FOR REMOTE NODES
EN 62488-2:2017	Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
I.S. EN 50116:2006	INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
I.S. EN 62911:2016	AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
EN 63024:2018	Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses
I.S. EN 60065:2014	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
I.S. EN 60950-22:2017	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS
EN IEC 61730-1:2018/AC:2018-06	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
I.S. EN 62820-1-1:2016	BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 62282-5-1:2012	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012 (EQV))
I.S. CLC/TR 62102:2006	ELECTRICAL SAFETY - CLASSIFICATION OF INTERFACES FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATIONS TECHNOLOGY NETWORKS
I.S. EN 62368-1:2014	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
I.S. EN 62018:2003	POWER CONSUMPTION OF INFORMATION TECHNOLOGY EQUIPMENT - MEASUREMENT METHODS
I.S. EN 62282-3-100:2012	FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV))
I.S. EN 62310-3:2008	STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
S.R. CWA 16688:2013	BATTERY SWAP SYSTEMS INTERFACES FOR ELECTRIC VEHICLES
I.S. CLC TS 50131-4:2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
I.S. EN 60598-2-12:2013	LUMINAIRES - PART 2-12: PARTICULAR REQUIREMENTS - MAINS SOCKET-OUTLET MOUNTED NIGHTLIGHTS (IEC 60598-2-12:2013 (EQV))
CEI CLC/TR 62102 : 2006	ELECTRICAL SAFETY - CLASSIFICATION OF INTERFACES FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATIONS TECHNOLOGY NETWORKS
EN 60598-1:2015/A1:2018	LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 62368-1:2014/AC:2017-03	AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED)
DIN EN 81-41:2016-06 (Draft)	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 41: VERTICAL LIFTING PLATFORMS INTENDED FOR USE BY PERSONS WITH IMPAIRED MOBILITY
DIN EN 12966:2015-03	ROAD VERTICAL SIGNS - VARIABLE MESSAGE TRAFFIC SIGNS
CEI EN 50556 : 2012	ROAD TRAFFIC SIGNAL SYSTEMS
I.S. HD 60364-4-444:2010	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
I.S. EN 50131-4:2009	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
I.S. EN 61131-2:2007	PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
I.S. EN 12405-1:2005	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV	Information technology equipment - Safety - Part 1: General requirements
DIN EN 14604 E : 2009	SMOKE ALARM DEVICES
09/30205182 DC : 0	BS EN 50310 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
BS EN 60601-1 : 2006	MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN 61558-2-16 : 2009	SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-16: PARTICULAR REQUIREMENTS AND TESTS FOR SWITCH MODE POWER SUPPLY UNITS AND TRANSFORMERS FOR SWITCH MODE POWER SUPPLY UNITS
14/30302919 DC : 0	PD CEN/TR 81-12 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - BASICS AND INTERPRETATIONS - PART 12: USE OF EN 81-20 AND EN 81-50 IN SPECIFIC MARKETS
UNE-EN 62109-1:2011	Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements
BS EN 61347-2-13 : 2014	LAMP CONTROLGEAR - PART 2-13: PARTICULAR REQUIREMENTS FOR D.C. OR A.C. SUPPLIED ELECTRONIC CONTROLGEAR FOR LED MODULES (IEC 61347-2-13:2014)
05/30133440 DC : DRAFT MAY 2005	EN 50310 ED 2 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
BS EN 61851-1:2011	Electric vehicle conductive charging system General requirements
BS EN 62282-4-101:2014	Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
BS EN 13617-1:2012	Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
UNE-EN 61851-23:2015	Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station
BS EN 50491-3:2009	General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) Electrical safety requirements
BS EN 62109-1:2010	Safety of power converters for use in photovoltaic power systems General requirements
UNE-EN 50491-3:2010	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
UNE-EN 13617-1:2012	Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 60950-1 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 62083:2010	Medical electrical equipment - Requirements for the safety of radiotherapy treatment planning systems
BS EN 60204-33:2011	Safety of machinery. Electrical equipment of machines Requirements for semiconductor fabrication equipment
12/30248102 DC : 0	BS EN 14604 - SMOKE ALARM DEVICES
BS EN 50310:2016	Telecommunications bonding networks for buildings and other structures
BS EN 62282-2:2012	Fuel cell technologies Fuel cell modules
BS EN 12182:2012	Assistive products for persons with disability. General requirements and test methods
UNE-EN 13160-1:2017	Leak detection systems - Part 1: General Principles
UNE-EN 62282-2:2012	Fuel cell technologies - Part 2: Fuel cell modules
DIN EN 15095:2009-06	POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS
EN 62911:2016	Audio, video and information technology equipment - Routine electrical safety testing in production
EN 15437-1:2009	Railway applications - Axlebox condition monitoring - Interface and design requirements - Part 1: Track side equipment and rolling stock axlebox
EN 14637:2007	Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
EN 16314:2013	Gas meters - Additional functionalities
EN 14604:2005/AC:2008	SMOKE ALARM DEVICES
EN 54-27:2015	Fire detection and fire alarms systems - Part 27: Duct smoke detectors
EN 14154-4:2014	Water meters - Part 4: Additional functionalities
EN 15095:2007+A1:2008	Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements
UNE-EN 60695-1-10:2017	Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
BS EN 60601-1-11:2015	Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
BS EN 50556:2011	Road traffic signal systems
TS 102 121 : 1.3.1	ENVIRONMENTAL ENGINEERING (EE); POWER DISTRIBUTION TO TELECOMMUNICATIONS AND DATACOM (ICT) EQUIPMENT
DIN EN 54-27 E : 2015	FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 27: DUCT SMOKE DETECTORS
EN 61587-1:2017	Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor condition use and transportation
BS EN 62488-2:2017	Power line communication systems for power utility applications Analogue power line carrier terminals or APLC
13/30274904 DC : 0	BS EN 14154-4 - WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
UNE-EN 16314:2014	Gas meters - Additional functionalities
PREN 50132-5-3 : DRAFT 2010	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
10/30218198 DC : 0	BS EN 50132-5-3:2010 - ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 5-3: VIDEO TRANSMISSION - ANALOGUE AND DIGITAL VIDEO TRANSMISSION
CLC/TR 50656:2016	SPD application in conjunction with Class II equipment
I.S. EN 62471-5:2015	PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS - PART 5: IMAGE PROJECTORS
CSA ISO/IEC 14762 : 2010	INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES)
BS EN 62056-7-5:2016	Electricity metering data exchange. The DLMS/COSEM suite Local data transmission profiles for Local Networks (LN)
UNE-EN 14154-4:2015	Water meters - Part 4: Additional functionalities
09/30207853 DC : 0	BS EN 12405-2 - GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
BS EN 60598-2-12:2013	Luminaires Particular requirements. Mains socket-outlet mounted nightlights
UNE-EN 50556:2011	Road traffic signal systems
CEI EN 62820-1-1 : 1ED 2017	BUILDING INTERCOM SYSTEMS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 62149-2:2014	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 2: 850 NM DISCRETE VERTICAL CAVITY SURFACE EMITTING LASER DEVICES
EN 60728-11:2017	Cable networks for television signals, sound signals and interactive services - Part 11: Safety
BS EN 61851-23:2014	Electric vehicle conductive charging system DC electric vehicle charging station
I.S. EN 50556:2011	ROAD TRAFFIC SIGNAL SYSTEMS
BS EN 62310-1:2005	Static transfer systems (STS) General and safety requirements
I.S. EN 1010-2:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
DIN EN 54-27:2015-05	Fire detection and fire alarm systems - Part 27: Duct smoke detectors
16/30339195 DC	BS EN 81-41. Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Part 41. Vertical lifting platforms intended for use by persons with impaired mobility
DIN EN 16314:2013-09	GAS METERS - ADDITIONAL FUNCTIONALITIES
TR 101 830-1 : 1.5.2	TRANSMISSION AND MULTIPLEXING (TM); ACCESS NETWORKS; SPECTRAL MANAGEMENT ON METALLIC ACCESS NETWORKS; PART 1: DEFINITIONS AND SIGNAL LIBRARY
BS EN 50468:2009	Resistibility requirements to overvoltages and overcurrents due to lightning for equipment having telecommunication ports
09/30182299 DC : 0	BS EN 1010-2:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY
08/30186475 DC : 0	BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS 7987(2001) : 2001	ROAD TRAFFIC SIGNAL SYSTEMS
BS EN 50486:2008	Equipment for use in audio and video door-entry systems
BS EN 60950-23:2006	Information technology equipment. Safety Large data storage equipment
BS EN 50132-5-3:2012	Alarm systems. CCTV surveillance systems for use in security applications Video transmission. Analogue and digital video transmission
BS EN 62149-4:2010	Fibre optic active components and devices. Performance standards 1300 nm fibre optic transceivers for Gigabit Ethernet application
BS EN 81-40:2008	Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods Stairlifts and inclined lifting platforms intended for persons with impaired mobility
UNE-EN 12405-2:2013	Gas meters - Conversion devices - Part 2: Energy conversion
BS EN 62018:2003	Power consumption of information technology equipment. Measurement methods
PD CLC/TR 62102:2006	Electrical safety. Classification of interfaces for equipment to be connected to information and communications technology networks
BS EN 62345:2005	ID format for 50 mm magneto-optical disc system
07/30174056 DC : 0	BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
UNE-EN 50131-4:2010	Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
EN 300 132-3 : 1.2.1	ENVIRONMENTAL ENGINEERING (EE); POWER SUPPLY INTERFACE AT THE INPUT TO TELECOMMUNICATIONS EQUIPMENT; PART 3: OPERATED BY RECTIFIED CURRENT SOURCE, ALTERNATING CURRENT SOURCE OR DIRECT CURRENT SOURCE UP TO 400 V
UNI EN 16314 : 2013	GAS METERS - ADDITIONAL FUNCTIONALITIES
NF EN 300119-5 : 2005	ENVIRONMENTAL ENGINEERING (EE) - EUROPEAN TELECOMMUNICATION STANDARD FOR EQUIPMENT PRACTICE - PART 5: THERMAL MANAGEMENT
UNE-EN 62684:2011	Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
CEI EN 60728-11 : 2014	CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY
UNE-EN 50131-1:2008	Alarm systems - Intrusion and hold-up systems -- Part 1: System requirements
CEI EN 62149-5 : 2012	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 5: ATM-PON TRANSCEIVERS WITH LD DRIVER AND CDR ICS
I.S. EN 50491-3:2009	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 3: ELECTRICAL SAFETY REQUIREMENTS
UNE-EN 12405-1:2006	Gas meters - Conversion devices - Part 1: Volume conversion
I.S. EN 50098-1:1999	CUSTOMER PREMISES CABLING FOR INFORMATION TECHNOLOGY - ISDN BASIC ACCESS
EN 60601-1-11:2015	Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
TR 102 489 : 1.4.1	ENVIRONMENTAL ENGINEERING (EE); EUROPEAN TELECOMMUNICATIONS STANDARD FOR EQUIPMENT PRACTICE; THERMAL MANAGEMENT GUIDANCE FOR EQUIPMENT AND ITS DEPLOYMENT
I.S. EN IEC 62684:2018	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
NF EN 50132-1 : 2010	ALARM SYSTEMS - CCTV SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 50332-2:2013	SOUND SYSTEM EQUIPMENT: HEADPHONES AND EARPHONES ASSOCIATED WITH PERSONAL MUSIC PLAYERS - MAXIMUM SOUND PRESSURE LEVEL MEASUREMENT METHODOLOGY - PART 2: MATCHING OF SETS WITH HEADPHONES IF EITHER OR BOTH ARE OFFERED SEPARATELY, OR ARE OFFERED AS ONE PACKAGE EQUIPMENT BUT WITH STANDARDISED CONNECTORS BETWEEN THE TWO ALLOWING TO COMBINE COMPONENTS OF DIFFERENT MANUFACTURERS
UNE-EN 62282-6-300:2013	Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
I.S. EN 62149-8:2014	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 8: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER DEVICES
I.S. EN IEC 61730-2:2018	PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING
CEI EN 62310-3 : 2010	STATIC TRANSFER SYSTEMS (STS) - PART 3: METHOD FOR SPECIFYING PERFORMANCE AND TEST REQUIREMENTS
CEI EN 50491-4-1 : 2014	GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS)
CEI EN 62676-1-1 : 2014	VIDEO SURVEILLANCE SYSTEMS FOR USE IN SECURITY APPLICATIONS - PART 1-1: SYSTEM REQUIREMENTS - GENERAL
I.S. EN 50514:2014	AUDIO, VIDEO AND INFORMATION TECHNOLOGY EQUIPMENT - ROUTINE ELECTRICAL SAFETY TESTING IN PRODUCTION
I.S. EN 62149-9:2014	FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 9: SEEDED REFLECTIVE SEMICONDUCTOR OPTICAL AMPLIFIER TRANSCEIVERS
I.S. EN 54-27:2015	FIRE DETECTION AND FIRE ALARMS SYSTEMS - PART 27: DUCT SMOKE DETECTORS
I.S. EN IEC 62688:2018	CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
BS EN 50131-4:2009	Alarm systems. Intrusion and hold-up systems Warning devices
BS EN 50174-3 : 2013	INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
17/30348010 DC : 0	BS EN 17076 - ANTI-COLLISION DEVICES AND SYSTEMS FOR TOWER CRANE - SAFETY CHARACTERISTICS AND REQUIREMENTS
UNI EN 14154-4 : 2015	WATER METERS - PART 4: ADDITIONAL FUNCTIONALITIES
17/30356731 DC : 0	BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
UNE-EN 50491-4-1:2013	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
CEI EN 63002 : 1ED 2017	IDENTIFICATION AND COMMUNICATION INTEROPERABILITY METHOD FOR EXTERNAL POWER SUPPLIES USED WITH PORTABLE COMPUTING DEVICES
TS 105 175-1 : 2.0.0	ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); PLASTIC OPTICAL FIBRE SYSTEM SPECIFICATIONS FOR 100 MBIT/S AND 1 GBIT/S
EN IEC 62684:2018	Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones
UNE-EN 12966:2015	Road vertical signs - Variable message traffic signs
CEI EN 50131-4 : 2010	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 4: WARNING DEVICES
S.R. CLC/TR 50656:2016	SPD APPLICATION IN CONJUNCTION WITH CLASS 2 EQUIPMENT
I.S. EN 60204-33:2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
I.S. EN 62684:2010	INTEROPERABILITY SPECIFICATIONS OF COMMON EXTERNAL POWER SUPPLY (EPS) FOR USE WITH DATA-ENABLED MOBILE TELEPHONES
EN 62477-1:2012/A1:2017	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016)
EN 81-50:2014	Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components
EN 62282-6-100:2010/A1:2012	FUEL CELL TECHNOLOGIES - PART 6-100: MICRO FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-6-100:2010/A1:2012)
EN 61918:2013/AC:2014	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
EN 62040-1:2008/A1:2013	UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 1: GENERAL AND SAFETY REQUIREMENTS FOR UPS (IEC 62040-1:2008/A1:2013)
DIN EN 14678-1:2013-06	LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
DIN EN 12405-1:2011-04	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
EN 60601-2-66:2015	Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments and hearing instrument systems
BS EN 14678-1:2013	LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
BS EN 14604:2005	Smoke alarm devices
BS EN 62040-1-2:2003	Uninterruptible power systems (UPS) General and safety requirements for UPS used in restricted access locations
EN 62149-8:2014	Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices
EN 62274:2005	Medical electrical equipment - Safety of radiotherapy record and verify systems
EN 61851-23:2014/AC:2016-06	ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 23: DC ELECTRIC VEHICLE CHARGING STATION (IEC 61851-23:2014/COR1:2016)
EN 12966:2014	Road vertical signs - Variable message traffic signs
EN 60940:2015	Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression
EN 62018:2003	Power consumption of information technology equipment - Measurement methods
EN 62282-5-1:2012	FUEL CELL TECHNOLOGIES - PART 5-1: PORTABLE FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-5-1:2012)
DIN EN 81-50:2015-02	SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS
EN 62083:2009	MEDICAL ELECTRICAL EQUIPMENT - REQUIREMENTS FOR THE SAFETY OF RADIOTHERAPY TREATMENT PLANNING SYSTEMS
EN 62149-4:2010	Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
EN 62056-7-5:2016	Electricity metering data exchange - The DLMS/COSEM suite - Part 7-5: Local data transmission profiles for Local Networks (LN)
EN 62041:2010	Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements
EN 62149-2:2014	Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
EN 12405-3 : 2015	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
DIN EN 14637:2008-01	Building hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
DIN EN 81-41:2011-09	Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility
EN 50491-3:2009	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
EN 62040-1-1:2003/corrigendum:2004
EN 62310-1:2005	Static transfer systems (STS) - Part 1: General and safety requirements
EN 62282-6-300:2013	Fuel cell technologies - Part 6-300: Micro fuel cell power systems - Fuel cartridge interchangeability
HD 60364-4-444:2010/AC:2012	LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-444: PROTECTION FOR SAFETY - PROTECTION AGAINST VOLTAGE DISTURBANCES AND ELECTROMAGNETIC DISTURBANCES
EN 60204-33:2011	Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment
EN 50491-4-1:2012	General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)
EN 50557:2011	Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses
EN 60950-21:2003	Information technology equipment - Safety - Part 21: Remote power feeding
EN 50486:2008	Equipment for use in audio and video door-entry systems
CLC/TS 50131-4:2006	Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
EN 50332-1:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment"
EN 62282-4-101:2014	Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 60896-21:2004	Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
EN 50131-4:2009	Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices
EN 62149-9:2014	Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
EN 62471-5:2015	Photobiological safety of lamps and lamp systems - Part 5: Image projectors
EN 50090-2-3:2005	Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES
HD 60364-4-442:2012	Low-voltage electrical installations - Part 4-442: Protection for safety - Protection of low-voltage installations against temporary overvoltages due to earth faults in the high-voltage system and due to faults in the low voltage system
EN 62310-3:2008	Static transfer systems (STS) - Part 3: Method for specifying performance and test requirements
EN 62109-1 : 2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 81-50:2017	Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60695-11-20:2015	Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
IEC 60112:2003+AMD1:2009 CSV	Method for the determination of the proof and the comparative tracking indices of solid insulating materials
EN 60999-2:2003	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)
IEC TR 60825-9:1999	Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation
HD 384.1 : 200S2	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 1: SCOPE, OBJECT AND FUNDAMENTAL PRINCIPLES
ISO 4892-1:2016	Plastics Methods of exposure to laboratory light sources Part 1: General guidance
IEC 60728-11:2016	Cable networks for television signals, sound signals and interactive services - Part 11: Safety
IEC 61643-321:2001	Components for low-voltage surge protective devices - Part 321: Specifications for avalanche breakdown diode (ABD)
EN 60998-1:2004	Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV	Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
IEC 60998-1:2002	Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
EN ISO 8256:2004	Plastics - Determination of tensile-impact strength (ISO 8256:2004)
IEC 60664-4:2005	Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
2006/95/EC : 2006	DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE)
IEC 60384-14:2013+AMD1:2016 CSV	Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
EN ISO 180:2000/A2:2013	PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013)
EN 60825-1:2014/AC:2017-06	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
EN 60825-12:2004	Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
EN 60065:2014/AC:2017-01	AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
EN ISO 4892-1:2016	Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
EN 60085:2008	Electrical insulation - Thermal evaluation and designation
IEC GUIDE 112:2017	Guide on the safety of multimedia equipment
IEC 60364-4-41:2005+AMD1:2017 CSV	Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 60073:2002	Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
EN 60073:2002	Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
EN ISO 9773:1998/A1:2003	Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)
EN 60127-1:2006/A2:2015	MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS
ISO 9773:1998	Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
IEC 60999-2:2003	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
IEC 60050-212:2010	International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases
IEC 60896-21:2004	Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test
IEC 60825-1:2014	Safety of laser products - Part 1: Equipment classification and requirements
EN ISO 178:2010/A1:2013	PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
ISO 8256:2004	Plastics — Determination of tensile-impact strength
IEC 60885-1:1987	Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V
IEC 60825-12:2004	Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
IEC 60227-2:1997+AMD1:2003 CSV	Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
CFR 47(PTS40-69) : OCT 2017	TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION
IEC 60127-1:2006+AMD1:2011+AMD2:2015 CSV	Miniature fuses - Part 1: Definitions for miniature fuses andgeneral requirements for miniature fuse-links
IEC 60269-2-1:2004	Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
IEC 61643-21:2000+AMD1:2008+AMD2:2012 CSV	Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
IEC 60695-10-3:2016	Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
EN 60947-1:2007/A2:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
IEC 60851-6:2012	Winding wires - Test methods - Part 6: Thermal properties
IEC 60851-5:2008+AMD1:2011 CSV	Winding wires - Test methods - Part 5: Electrical properties
IEC 60364-1:2005	Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
IEC 61643-311:2013	Components for low-voltage surge protective devices - Part 311: Performance requirements and test circuits for gas discharge tubes (GDT)
IEC 60227-1:2007	Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
EN 60112 : 2003 AMD 1 2009	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
EN 60747-5-5:2011/A1:2015	SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 5-5: OPTOELECTRONIC DEVICES - PHOTOCOUPLERS (IEC 60747-5-5:2007/A1:2013)
IEC 60999-1:1999	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
IEC 60085:2007	Electrical insulation - Thermal evaluation and designation
IEC 60410:1973	Sampling plans and procedures for inspection by attributes
ISO 262:1998	ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
IEC 60908:1999	Audio recording - Compact disc digital audio system
EN 60695-11-4 : 2011	FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
IEC 61558-1:2017	Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
EN 50332-1:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 1: General method for "one package equipment"
ISO 180:2000	Plastics Determination of Izod impact strength
EN 60695-11-3:2012	Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
ECMA 267 : 3ED 2001	120 MM DVD - READ-ONLY DISK
2006/25/EC : 2006 AMD 3 2013	DIRECTIVE 2006/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 5 APRIL 2006 ON THE MINIMUM HEALTH AND SAFETY REQUIREMENTS REGARDING THE EXPOSURE OF WORKERS TO RISKS ARISING FROM PHYSICAL AGENTS (ARTIFICIAL OPTICAL RADIATION) (19TH INDIVIDUAL DIRECTIVE WITHIN THE MEANING OF ARTICLE 16(1) OF DIRECTIVE 89/391/EEC)
IEC 60906-2:2011	IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c. and 20 A 125 V a.c.
EN 60851-6:2012	Winding wires - Test methods - Part 6: Thermal properties
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	Degrees of protection provided by enclosures (IP Code)
ISO 9772:2012	Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
IEC 61058-1:2016	Switches for appliances - Part 1: General requirements
IEC 60896-22:2004	Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV	Low-voltage switchgear and controlgear - Part 1: General rules
IEC 60695-11-10:2013	Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
EN 60695-10-3:2016	Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
EN 50272-2:2001	Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries
IEC 61051-2:1991	Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors
EN 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 60906-1:2009	IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
EN 50332-2:2013	Sound system equipment: Headphones and earphones associated with personal music players - Maximum sound pressure level measurement methodology - Part 2: Matching of sets with headphones if either or both are offered separately, or are offered as one package equipment but with standardised connectors between the two allowing to combine components of different manufacturers or different design
IEC 60851-3:2009+AMD1:2013 CSV	Winding wires - Test methods - Part 3: Mechanical properties
ISO 4892-4:2013	Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
EN 60317-43:1997/A1:2010	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 43: AROMATIC POLYIMIDE TAPE WRAPPED ROUND COPPER WIRE, CLASS 240
IEC 62471:2006	Photobiological safety of lamps and lamp systems
EN 60068-2-78:2013	Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
IEC TS 60695-11-3:2004	Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
ISO 4892-2:2013	Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
ISO 261:1998	ISO general purpose metric screw threads General plan
119999/5/EC : 1999	DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 1999 ON RADIO EQUIPMENT AND TELECOMMUNICATIONS TERMINAL EQUIPMENT AND THE MUTUAL RECOGNITION OF THEIR CONFORMITY
EN 50395 : 2005 AMD 1 2011	ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
EN 61058-1:2002/A2:2008	SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
IEC 61965:2003	Mechanical safety of cathode ray tubes
EN 60999-1:2000	Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)
IEC 61643-331:2003	Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV)
IEC 60747-5-5:2007+AMD1:2013 CSV	Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers
IEC 62133 : 2.0EN+(REDLINE+VERSION)	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
IEC 60695-10-2:2014	Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method
ISO 4046-4:2002	Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
ISO 7000:2014	Graphical symbols for use on equipment Registered symbols
IEC 60317-43:1997+AMD1:2010 CSV	Specifications for particular types of winding wires - Part 43: Aromatic polyimide type wrapped round copper wire, class 240
IEC 61140:2016	Protection against electric shock - Common aspects for installation and equipment
EN 60825-2:2004/A2:2010	SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS)
IEC TS 60695-11-4:2004	Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
EN 60695-11-5:2017	Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
IEC 61032:1997	Protection of persons and equipment by enclosures - Probes for verification
IEC 60695-11-5 : 2.0	FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
IEC 60695-11-5:2016	Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
AS/NZS 3112:2017	Approval and test specification - Plugs and socket-outlets
EN 62471:2008	Photobiological safety of lamps and lamp systems
ISO 178:2010	Plastics Determination of flexural properties
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN ISO 4892-2:2013	Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
EN 50396 : 2005 AMD 1 2011	NON ELECTRICAL TEST METHODS FOR LOW VOLTAGE ENERGY CABLES
IEC 62368-1:2014	Audio/video, information and communication technology equipment - Part 1: Safety requirements
EN 60851-5:2008/A1:2011	WINDING WIRES - TEST METHODS - PART 5: ELECTRICAL PROPERTIES (IEC 60851-5:2008)
IEC 60990:2016	Methods of measurement of touch current and protective conductor current
EN 60730-1:2016	Automatic electrical controls - Part 1: General requirements
EN 60695-2-11:2014	Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)
IEC 60730-1:2013+AMD1:2015 CSV	Automatic electrical controls - Part 1: General requirements
EN 60990:2016	Methods of measurement of touch current and protective conductor current
EN 62133:2013	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart